A mathematical model of the working processes of a hybrid displacement piston power machine with profiled groove seal is proposed. Calculation of the working processes in the compressor section in the presence of a liquid film under the piston and a “pump” course in the pump section and a piston seal is presented. The working processes for a hybrid displacement piston power machine with a smooth groove seal and with a profiled groove seal is calculated and the influence of a profiled groove seal on the working processes and the dynamics of the layer of liquid over the piston is demonstrated.
Similar content being viewed by others
References
V. E. Shcherba, A. P. Bolshtyanskii, V. V. Shalai, et al., Pump Compressors. Working Processors and Foundations of Design [in Russian], Mashinostroenie, Moscow (2013.
V. E. Shcherba, V. V. Shalai, and E. A. Pavlyuchenko, “Mathematical simulation of working processes of a piston compressor with intensive cooling of the cylinder-piston group,” Khimicheskoe i Neftegazovoe Mashinostroenie, No. 4, pp. 28−32 (2015).
A. Yu. Kondyurin, V. E. Shcherba, V. V. Shalai, et al., “Calculation of the flow of liquid in the groove seal of a pump compressor produced in the form of a hydraulic diode,” Khimicheskoe i Neftegazovoe Mashinostroenie, No. 4, pp. 30−34 (2016).
A. Yu. Kondyurin, V. E. Shcherba, V. V. Shalai, et al., “Analysis and optimization of the basic geometric parameters of an annular groove seal produced in the form of a hydraulic diode,” Khimicheskoe i Neftegazovoe Mashinostroenie, No. 4, pp. 39−44 (2016).
P. I. Plastinin, Piston Compressors, vol. 1 [in Russian], Kolos, Moscow (2006).
V. E. Shcherba, E. Yu. Nosov, E. A. Pavlyuchenko, et al., “Analysis of the dynamics of the travel of liquid in a hybrid piston power machine with gas volume at the suction,” Khimicheskoe i Neftegazovoe Mashinostroenie, No. 4, pp. 15−19 (2016).
I. I. Kukolevskii and L. G. Podvidz, Collection of Problems in Mechanical Engineering Hydraulics [in Russian], Izd-vo MGTU im. N. E. Baumana (2002).
Applied scientific research conducted with the financial support of the state under the aegis of the Ministry of Education and Science of Russia. Unique identifier of applied scientific study: RFMEF157414X0068.
Author information
Authors and Affiliations
Corresponding author
Additional information
V. N. Kostyukov is deceased.
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 54, No. 5, pp. 31−35, May, 2018.
Rights and permissions
About this article
Cite this article
Shcherba, V.E., Shalai, V.V., Kostyukov, V.N. et al. A Mathematical Model of the Working Processes of a Hybrid Power Displacement Piston Machine with Profiled Groove Seal. Chem Petrol Eng 54, 335–344 (2018). https://doi.org/10.1007/s10556-018-0484-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-018-0484-1