A method is proposed for calculating the inhomogeneity coefficient in the workspace of a drum-belt mixer of bulk components with brush elements in a three-stage batch mixing method with non-uniform proportioning. The method is based on a stochastic model of the motion of rarefied particle flows following interaction with flexible elements fixed along a helical line on the surface of the mixer drums. The principal coefficients affecting the quality of a bulk mixture are analyzed in the form of combined structural and regime complexes of parameters of the mixer and the characteristics of the physical and mechanical state of the mixed media are analyzed. The results obtained can be used to develop an engineering technique for calculating the parameters of a new drum-belt mixer of friable components.
Similar content being viewed by others
Change history
08 November 2018
The first author’s name should read A. B. Kapranova.
References
M. N. Bakin, A. B. Kapranova, and I. I. Verloka, “Modern apparatuses with movable belt for mixing bulk materials,” Fundament. Issledovaniya, No. 5, part 4, 687−691 (2014).
A. B. Kapranova, M. N. Bakin, I. I. Verloka, and A. I. Zaytsev, “Influence of moisture of bulk media on their distribution on the workspace of a mixer with movable belt,” Vest. Tambov. Gos. Tekh. Un-ta, 21, No. 1, 97−104 (2015).
A. B. Kapranova, M. N. Bakin, and A. I. Zaitsev, “Granulometric composition of media in a description of their mixing in an apparatus with movable belt,” Vest. Tambov. Gos. Tekh. Un-ta, 20, No. 4, 754−757 (2014).
A. B. Kapranova, M. N. Bakin, A. Ye. Lebedev, and A. I. Zaytsev, “Estimate of inhomogeneity coefficient of granular mixture in the workspace of a drum-belt device,” Khimiya i Khimich. Tekhnologiya (Ivanovo), 57, vyp. 9, 104−106 (2014).
Patent 2506208 (Russian Federation), IPC B 65 B 1/36, “Apparatus for mixing bulk materials,” Byul., No. 4 (February 2, 2014).
M. N. Bakin, A. B. Kapranova, and I. I. Verloka, “Modern methods for the mathematical description of the process of mixing of bulk materials,” Fundament. Issledovaniya, No. 5, part 5, 923−927 (2014).
M. N. Bakin, A. B. Kapranova, and I. I. Verloka, “An investigation of the distribution of bulk components in the work space of a drum-belt mixer,” Fundament. Issledovaniya, No. 5, part 5, 928−933 (2014).
I. I. Verloka, M. N. Bakin, and A. B. Kapranova, “On the experimental distribution of particles of bulk components in rarefied fields,” Khimiya i Khimich. Tekhnologiya (Ivanovo), 58, vyp. 10, 70−72 (2015).
A. B. Kapranova and I. I. Verloka, “Estimation of the content of a key component following impact scattering of bulk materials on the initial stage of batch mixing,” Vest. IGEU, No. 3, 78−83 (2016).
Yu. I. Makarov, Equipment for Mixing Bulk Materials [in Russian], Mashinostroenie, Moscow (1973).
G. Korn and T. Korn, Handbook on Mathematics for Scientific Workers and Engineers [Translated from English by I. G. Aramanovich et al.], Nauka, Moscow (1984).
I. Verloka, A. Kapranova, M. Tarshis, and S. Cherpitsky, “Stochastic modeling of bulk components batch mixing process in gravity apparatus,” Inter. J. Mech. Engr. Technol., 9, No. 1, 2, 438−444 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 54, No. 5, pp. 3−9, May, 2018.
Rights and permissions
About this article
Cite this article
Kapranova, B., Bakin, M.N. & Verloka, I.I. Simulation of the Quality Criterion of a Mixture in a Drum-Belt Apparatus. Chem Petrol Eng 54, 287–297 (2018). https://doi.org/10.1007/s10556-018-0477-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-018-0477-0