Advertisement

Chemical and Petroleum Engineering

, Volume 53, Issue 11–12, pp 711–715 | Cite as

Ozone Generator Aluminum Electrode Soldering

  • I. E. Storchai
  • A. I. Smorodin
  • Yu. V. Gorbatskii
CRYOGENIC ENGINEERING, PRODUCTION AND USE OF INDUSTRIAL GASES, VACUUM ENGINEERING
  • 18 Downloads

The creation of an entirely soldered ozone electrode component is proposed and implemented for the first time by the authors. Electrode construction with a ribbed plate insert within it is the most perfect heat exchange device from the point of view of effective heat exchange and uniform distribution of liquid flow through its section. Stages are considered for electrode preparation for soldering and a standard heating cycle is proposed for soldering and electrode with eutectic silumin. It is shown that as a result of the soldering thermal cycle metal structure becomes coarse-grained and favorable for subsequent electrochemical formation of a nanostructured anodic oxide coating 50–60 μm thick.

Keywords

soldering aluminum ribbed plate electrode dielectric barrier vacuum furnace soldering thermal cycle 

References

  1. 1.
    E. I. Storchai, A. I. Smorodin, L. S. Lantushenko, et al., “Rule of S-shaped development of engineering systems applied to contemporary ozonizer construction,” Khim. Neftegaz. Mashinostr., No. 8, 25–27 (2014).Google Scholar
  2. 2.
    E. I. Storchai, A. I. Smorodin, M. M. Pashin, et al., “New generation pilot plant ozonizer unit,” Khim. Neftegaz. Mashinostr., No. 12, 17–21 (2014).Google Scholar
  3. 3.
    E. I. Storchai, A. I. Smorodin, V. I. Skol’tsov, et al., “Choice of structural materials for new generation ozone generator electrodes,” Khim. Neftegaz. Mashinostr., No. 11, 19–22 (2014).Google Scholar
  4. 4.
    E. I. Storchai, A. I. Smorodin, L. S. Lantushenko, et al., “New generation ozone generator,” in: Ozone and Other Ecologically Clean Oxidizing Agents: Science and Technology, MAKS Press, Moscow (2014), pp. 59–69.Google Scholar
  5. 5.
    E. I. Storchai, A. I. Smorodin, L. S. Lantushenko, et al., “Ozone generators with new generation electrodes and their preparation method,” in: Ozone and Other Ecologically Clean Oxidizing Agents: Science and Technology, MAKS Press, Moscow (2016), pp. 10–21.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • I. E. Storchai
    • 1
  • A. I. Smorodin
    • 1
  • Yu. V. Gorbatskii
    • 1
  1. 1.Bauman Moscow State Technical University (BMSTU)MoscowRussia

Personalised recommendations