A production process is considered for preparing reducer-type objects from steel grades 17G1S and 09G2S by centrifugal electroslag casting. Analyses of chemical composition and mechanical properties are provided for objects prepared by different technology. The advantage of centrifugal electroslag casting is demonstrated, making it possible to prepare cast objects with physical and mechanical properties corresponding to the State Standard (GOST) and technical specifications for these steel grades having configuration and geometric dimensions close to those of finished objects.
Similar content being viewed by others
References
B. E. Paton and B. I. Medovar, Electroslag Crucible Melting and Metal Pouring, Naukova Dumka, Kiev (1988).
B. I. Medovar, A. K. Tsikulenko, V. L. Shevtsov, et al., Electroslag Process Metallurgy, Naukova Dumka, Kiev (1986).
V. I. Bol’shakov and Yu. P. Pilipchenko, “Thermal and thermomechanical strengthening of rolled product,” in: Steel Thermal and Thermomechanical Treatment, Metallurgia, Moscow (1984), pp. 35–38.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 12, pp. 41–43, December, 2016.
Rights and permissions
About this article
Cite this article
Zherebtsov, S.N., Mikhailets, S.N., Zabegailo, I.V. et al. Use of a Developed Production Process of Centrifugal Electroslag Casting For Manufacturing a Reducer. Chem Petrol Eng 52, 859–862 (2017). https://doi.org/10.1007/s10556-017-0283-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-017-0283-0