Features of the movement of liquid in the output channel of a wedge gate valve as a function of the angle of taper of the channel are investigated. A program of finite-element analysis is used as the tool of the investigation. From the results of numerical modeling (ANSYS program), it is established that the optimal value of the angle of taper is 8° if the working medium is water. The results presented in the article may be used to improve the designs of gate valves.
Similar content being viewed by others
References
A. V. Fominykh, D. N. Ovchinnikov, and I. R. Chinyaev, “Determination of the hydraulic characteristics of shut-off control valves,” Agrarn. Vest. Urala, No. 2 (108), 27–30 (2013).
S. X. Li, L. C. Li, and Y. Z. Hou, “Seal analysis and optimization of large diameter gate valve based on ANSYS,” Appl. Mech. Mater., 415, 498–501 (2013).
V. M. Krasil’shchikov, “A floating-saddle gate valve,” Chem. Petr. Eng., 38, No. 3–4, 230–232 (2002).
G. N. Kolesnikov and E. A. Tikhonov, “Contact interaction between seat and wedge in gate valves,” Chem. Petr. Eng., 50, No. 5–6, 382–386 (2014).
V. V. Burenin, “Pipeline stop values for chemical, oil refining and petrochemical plants,” Chem. Petr. Eng., 38, No. 3–4, 175–178 (2002).
V. M. Krasil’shchikov, “Valve of improved reliability,” Chem. Petr. Eng., 38, No. 9–10, 538–542 (2002).
L. Wu, J. Xiao, H. Chen, et al., “A three-dimensional computational analysis of one-way fluid-structure coupling in main steam isolation valve,” Nucl. Technol., 188, No. 1, 78–82 (2014).
G. I. Sevast’yanikhin, “Gate valves: constructions, new designs. Selection as a function of service conditions and service parameters,” Armaturostroenie, No. 5, 40–45 (2006).
E. E. Blagov, “Prediction of the flow regimes of liquid in hydraulic restrictions,” Armaturostroenie, No. 4 (49), 45–52 (2007).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 10, pp. 36–37, October, 2016.
Rights and permissions
About this article
Cite this article
Kolesnikov, G.N., Tikhonov, E.A. Influence of the Angle of Taper of Output Channel of Wedge Gate Valve on the Movement of a Liquid. Chem Petrol Eng 52, 707–709 (2017). https://doi.org/10.1007/s10556-017-0256-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-017-0256-3