Features and problems of producing reactoplastic nanomodified polymer composites were analyzed using modification of epoxide oligomers with carbon nanotubes as an example. Results from dispersion of highly viscous suspensions of epoxide oligomers with carbon nanotubes by a rolling method and by induction of low-frequency ultrasound cavitation were discussed. The efficiency of introducing the nanoparticles into the liquid polymer medium depended on not only the dose but also the mixing parameters.
Similar content being viewed by others
References
O. E. Kolosov, Production of High-Quality Traditional and Nanomodified Reactoplast Polymer Composites [in Ukrainian], VPI VPK Politekhnika, Kiev (2015).
A. N. Blokhin, Process Development and Apparatus for Nanocarbon Modified Composites of Epoxide Resins: PhD Thesis, Tambov (2012).
R. R. Abdrakhimov, S. B. Sapozhnikov, and V. V. Sinitsir, “Analysis of suspension rheology for effective dispersion of MWCNT in epoxy resin,” Vestn. Yuzhno-Ural. Gos. Univ., Ser. Mat. Mekh. Fiz., No. 34, No. 7, 68–74 (2012).
N. Hu, Y. Karube, M. Arai, et al., “Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor,” Carbon, No. 48, 680–687 (2010).
P. A. Rebinder, Surface Effects in Disperse Systems. Physicochemical Mechanics. Selected Works, Nauka, Moscow (1979).
E. G. Avakumov, Mechanical Methods for Activating Chemical Processes, Nauka, Novosibirsk (1989).
M. Wichmann, Electrically Conductive Polymer Nanocomposite Matrix System with Load and Health Monitoring Capabilities: Doct.-Eng. Dissert., Hamburg (2009).
http://nanotc.ru/index.php?option=com_content&task=view&id=8&Itemid=34.
Author information
Authors and Affiliations
Corresponding author
Additional information
For Part 1 see No. 8 (2015); part 2, No. 9 (2015); part 3, No. 1 (2016).
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 8, pp. 42–45, August, 2016.
Rights and permissions
About this article
Cite this article
Kolosov, A.E. Preparation of Reactoplastic Nanomodified Polymer Composites. Part 4. Effectiveness of Modifying Epoxide Oligomers with Carbon Nanotubes (Review). Chem Petrol Eng 52, 573–577 (2016). https://doi.org/10.1007/s10556-016-0235-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-016-0235-0