Initial results from a comparative analysis of hydrodynamic and heat-transfer data for the channel connecting compression and displacement volumes (thoroughfare) are attained by using semiempirical criterial functions and finite-element simulation with various RANS turbulence models for a reversed Stirling cryocooler. The model for the numerical experiment is created using the ANSYS Fluent CFD software.
Similar content being viewed by others
References
L. Dand, “Space cryocooler developments,” Phys. Procedia, 67, 1–10 (2015).
A. M. Arakharov, Cryology Principles. Entropic-Statistical Analysis of Low-Temperature Systems, Izd. MGTU im. Baumana, Moscow (2014).
M. A. Mikheev and I. M. Mikheeva, Heat-Transfer Principles, Stereotype, Energiya, Moscow (1977), 2nd ed.
M. P. Malkov (ed.), I. B. Danilov, A. G. Zel’dovich, and A. B. Fradkov, Handbook of the Physico-Technical Bases of Cryogenics, Energoatomizdat, Moscow (1975), 3rd ed.
M. O. Shteinberg (ed.), Handbook of Hydraulic Resistance, Mashinostroenie, Moscow (1992), 3rd ed.
S. M. Salim and S. C. Cheah, “Wall y+ strategy for dealing with wall-bounded turbulent flows,” IMESC 2009, March 18–20, Hong Kong.
I. A. Korkodinov, “The review of set of k–ε models for modeling turbulence,” Vestn. Permsk. Nats. Issled. Politekh. Univ., Mashinostr. Materialoved., 15, Iss. 2 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftega zovoe Mashinostroenie, No. 8, pp. 14–19, August, 2016.
Rights and permissions
About this article
Cite this article
Kulik, V.V., Parkin, A.N. & Navasardyan, E.S. Numerical Modeling Procedure for Micromachined Cryogenic Cooler Elements Using ANSYS Fluent Software and Viscous Flow in a Small-Diameter Channel with Heat Transfer as an Example. Chem Petrol Eng 52, 531–538 (2016). https://doi.org/10.1007/s10556-016-0227-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-016-0227-0