An approach is developed for computer-aided design applying principles based on structural-parametric geometric modeling methodology for determining structural and technological parameters of technical ways to mold reactoplastic composite fiber materials using ultrasonic treatment. A general structuralparametric model is developed for a production process of composite fiber material preparation presented in the form of three consolidated blocks: epoxy resin ultrasonic treatment and impregnated composite preparation; fiber material impregnation with polymer binder; dosed application of polymer binder into impregnated fiber material.
Similar content being viewed by others
References
O. G. Tsyplakov, Scientific Bases of Composite Fiber Material Technology, Part 1, Perm (1974).
V. N. Kuleznev and V. K. Gusev (eds.), Bases of Plastic Processing Technology, Khimiya, Moscow (1995).
D. A. Gershgal and M. V. Fridman, Ultrasonic Production Equipment Energiya, Moscow (1976).
I. P. Golyamina (ed.), Ultrasound. Small Encyclopedia, Sov. Entsiklopediya, Moscow (1983).
B. G. Novitskii, Use of Acoustic Vibrations in Chemical Production Processes, Khimiya, Moscow (1983).
O. E. Kolosov, V. Sivetskii, and O. P. Kolosova, Preparation of Fiber-Filled Reactoplastic Polymer Composite Materials with Application of Ultrasound, VPK Politekhnika, Kiev (2015).
O. E. Kolosov, Preparation of Traditional and Nanomodified Reactoplastic Polymer Composite Materials, VPI VPK Politekhnika, Kiev (2015).
А. E. Kolosov, V. I. Sivetskii, E. P. Kolosova, and E. A. Lugovskaya, “Procedure for analysis of ultrasonic cavitator with radiative plate,” Chem. Petrol. Eng., 48, No. 11–12, 662–672 (2013).
V. V. Vanin and G. A. Virchenko, “Determination and main assumptions of structural-parametric geometric modeling,” in: Geometric and Computer Modeling: Coll. Sci. Works, KhDUKhT, Kharkiv (2009), Iss. 23, pp. 42–48.
V. V. Vanin, G. A. Virchenko, and G. P. Gryaznova, “Computer structural-parametric geometric modeling as a basis for computer optimization of design and manufacture of engineering objects,” Vost.-Evrop. Zh. Pered. Tekhnol. Tekhnol. Mashinostr., No. 5/1 (47) 54–57 (2010).
V. V. Vanin, S. L. Shambina, and V. G. Virchenko, “Use of a combinatorial-variation approach for computer geometric modeling of engineering structures and equipment,” Stroit. Mekhan. Inzh. Konstr. Sooruzh., No. 4, 3–8, RUDN, Moscow (2013).
S. L. Shambina, “Modular variational geometric modeling of complex engineering objects,” Vestn. Univ. Druzhby Narodov. Inzh. Issled., No. 2, 5–8 (2013).
V. G. Virchenko and I. P. Taras, “Computer combinatorial-variation geometric modeling of engineering objects,” Sci. Bull. Politehnica Univ. Timisoara, Transactions on Hydrotechnics, 58 (72), Fasc. Supl., 173–176 (2013).
V. V. Vanin and G. A. Virchenko, “Structural-parametric model and method for interpreting computer-aided design of a contemporary airplane,” Visn. Kherson. Nats. Tekhn. Univ., No. 3 (50), 571–574, KhNTU, Kherson (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 7, pp. 41–46, July, 2015.
Rights and permissions
About this article
Cite this article
Kolosov, A.E., Virchenko, G.A., Kolosova, E.P. et al. Structural and Technological Design of Ways for Preparing Reactoplastic Composite Fiber Materials Based on Structural Parametric Modeling. Chem Petrol Eng 51, 493–500 (2015). https://doi.org/10.1007/s10556-015-0075-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-015-0075-3