A mathematical model of the motion of material traveling along a curved blade on a rotating flat disk, by means of which the trajectory of the travel of the medium and the magnitude and direction of the total velocity vector at any point on the blade may be determined, is proposed. Graphic dependences of the total velocity of the motion of the granular medium along atheblade and the angle of detachment, which determines the dependence of the direction of the total velocity on the angular spin rate of the rotor, are obtained.
Similar content being viewed by others
References
P. E. Vaitehovich, Intensitification and Simulation of Processes of Dispersion in a Field of Inertial Forces, BGTU, Minsk (2008).
E. L. Borokha, V. V. Vorob’ev, and A.V. Gorobets, “Centrifugal crushers and impact-type mills,” Proc. 3rd Int. Sci. Techn. Conf. Centrifugal Engineering – High Technologies, NAN Belarus, Minsk, Sept. 9–11, 2008, NPRUP NPO Tsentr, Minsk (2008), pp. 5–15.
V. V. Tovarov and G. N. Oskalenko, “A study of the flight of particles from the blade rotors of centrifugal mincing machines,” Tr. Inst. Giprotsement, Gosstroiizdat (1962), Iss. 24, pp. 64–91.
M. B. Generalov, Mechanics of Solid Disperse Media in Processes of Chemical Engineering, Izd. N. Bochkarevoi, Kaluga (2002).
L. G. Loitsyanskii, Mechanics of Liquids and Gases, Nauka, Moscow (1978).
G. Schlichting, Theory of the Boundary Layer [Russian translation], Nauka, Moscow (1974).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 7, pp. 7–8, July, 2015.
Rights and permissions
About this article
Cite this article
Vaitekhovich, P.E., Grebenchuk, P.S. & Tabolich, A.V. Motion of Grindable Material on the Surface of the Accelerator of a Centrifugal-Impact Mill. Chem Petrol Eng 51, 452–455 (2015). https://doi.org/10.1007/s10556-015-0067-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-015-0067-3