Questions related to the creation of technological equipment by means of which nanodimensional precision in processing by turning methods may be achieved are considered. The solution of the problem is based on synthesis of the parameters of a dynamic model of a lathe, which makes it possible to take into account the dynamic characteristics of existing or newly designed equipment and the errors of dynamic alignment of the lathe.
Similar content being viewed by others
References
Yu. V. Baranovskii, L. A. Brakhman, A. I. Gladevich, et al., Metal Cutting Regimes, NIITavtoprom, Moscow (1995).
A. G. Kosilova and R. K. Mescheryakov (eds.), Handbook of the Machine Builder Production Engineer, Mashinostroenie, Moscow (1985), 4th ed.
Ya. L. Gurevich, M. V. Gorokhov, V. I. Zakharov, et al., Cutting Regimes of Difficultly Worked Materials, Mashinostroenie, Moscow (1986), 2nd ed.
E. O. Ivakhnenko, Assuring Processing Precision on Lathes by Selection of Efficient Cutting Regimes in Light of the State of the Dynamic System: Auth. Abstr. Dissert. Cand. Techn. Sci., Khabarovsk (1997).
E. O. Ivakhnenko and V. V. Kuts, Structural-Parametric Synthesis of Technological Systems, Kursk State Technological University (2010).
E. O. Ivakhnenko and V. V. Kuts, Predesign Investigations of Metal-Cutting Systems, Yugo-Zap. Gos. Univ., Kursk (2013), p. 188.
V. V. Kuts, “Evolution of the space of design parameters of metal-cutting lathes based on vibrations of the units of the lathes,” Fund. Prikl. Probl. Tekhn. Tekhnol., No. 6 (284), 58–66 (2010).
V. V. Kuts, S. V. Degtyarev, A. P. Kuz’menko, and O. G. Loktionova, “Evolution of space of design parameters of metal-cutting lathes on early design stages in light of vibrations of the units of a forming system resting on elastic supports,” Izv. Yugo-Zap. Gos. Univ., No. 1, 60–65 (2013).
V. V. Kuts, Methodology of Pre-Design Investigations of Specialized Metal-Cutting Systems: Auth. Abstr. Dissert. Doct. Techn. Sci., Kursk (2012).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 7, pp. 3–6, July, 2015.
Rights and permissions
About this article
Cite this article
Ivakhnenko, A.G., Kuts, V.V., Altukhov, A.Y. et al. Dynamic Synthesis of Technological Equipment for the Manufacture of Precision Articles. Chem Petrol Eng 51, 445–451 (2015). https://doi.org/10.1007/s10556-015-0066-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-015-0066-4