Questions related to improving standardization of the rough surfaces of products of the machine-building industry are considered. The use of the variable height parameter of the active ledges of a roughness and the variable depth parameter of the hollows of a roughness and their sign alternation is proposed. In addition to procedural support of State Standard GOST 2789–73, the use of a method of estimation of the standard deviation of the variable height parameter of roughness based on readings of ten measurements of active ledges is recommended.
Similar content being viewed by others
References
GOST 2789–73 (ST SEV 638–77), Surface Roughness, Moscow (1980).
A. V. Kochetkov, A. V. Korolev, A. A. Korolev, and R. N. Abutalipov, “Problems in improving the conclusions of the state standard on rough surfaces,” in: Dynamics of Production Systems (DTS-2004): Proc. Sci. Techn. Conf., Saratov State Techn. Univ., Saratov (2004), pp. 230–232.
N. I. Mokienko, Metal Working with Foundations of Materials Science [in Russian], Vysshaya Shkola, Moscow (1973), 5th ed., pp. 160–161.
A. V. Kochetkov, M. L. Ermakov, N. E. Kokodeeva, and S. P. Arzhanukhina, “State Standard for rough surfaces needs improvement,” Avtomob. Prom., No. 12, 32–34 (2008).
A. V. Korolev, Investigations of Processes Involved in the Formation of the Surfaces of a Tool and Part in Abrasive Treatment [in Russian], Izd. Saratov Univ., Saratov (1975).
M. S. Nevelson, Automatic Control of the Precision of Machining on Metal Cutting Machine Tools [in Russian], Mashinostroenie, Leningrad (1982).
V. V. Ermolaeva, Increasing the Precision of Mechanical Finishing of Parts on the Basis of Adaptive Adjustments: Auth. Abstr. Dissert. Cand. Techn. Sci., Saratov (1998).
Yu. E. Vasil’ev, I. B. Chelpanov, S. P. Arzhanukhina, and V. V. Kamenev, “Automation and control of the mobility of cement concrete mixtures in discrete production,” Stroi. Mater., No. 5, 34–36 (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 1, pp. 33–38, January, 2014.
Rights and permissions
About this article
Cite this article
Kochetkov, A.V., Yankovskii, L.V. & Kadyrov, Z.N. Standardization of Roughness of Products of the Machine-Building Industry on the Basis of Variable Height Indicator of Ledges and Variable Depth Indicator of Hollows as an Extension of State Standard GOST 2789–73. Chem Petrol Eng 50, 50–57 (2014). https://doi.org/10.1007/s10556-014-9854-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-014-9854-5