The influence of the parameters of ultrasonic compaction on the mechanical and tribological properties of a composite polytetrafluoroethylene-based material is considered. It is shown that through the use of ultrasonic compaction in the course of fabricating complex-modified polytetrafluoroethylene, an increase in the ultimate strength, modulus of elasticity, and wear resistance of the composite are achieved together with a significant reduction in its friction coefficient. The new technology of ultrasonic compaction of a composite material may be used to fabricate plain bearings, sealing elements of shafts and axles of plants and mechanisms, as well as hydraulic engines, and the rods of hydraulic cylinders.
Similar content being viewed by others
References
P. N. Bogdanovich and V. Ya. Prushak, Friction and Wear in Machines: Textbook [in Russian], Vysshaya Shkola, Minsk (1999).
Yu. K. Mashkov, Z. N. Ovchar,V. I. Surikov, et al., Composite Materials Based on Polytetrafluoroethylene. Structural Modification [in Russian], Mashinostroenie, Moscow (2005).
N. A. Adamenko,Yu. P. Trykov, A. V. Fetisov, et al., “Shock-wave treatment of polymers and polymer composites,” Fiz. Khim. Obrab. Mater., No. 5, 82–87 (2006).
N. A. Bulychev, V. P. Fomin, A. P. Bobylev, et al., “Influence of vibromechanical action on the structure and properties of polymer membranes,” Materialovedenie, No. 4, 3–8 (2010).
E. A. Chechetkina, E. V. Kisterev, E. B. Kryukova, et al., “Production of chalcogenide crystalline glass by means of ultrasonic treatment of glass,” Materialovedenie, No. 4, 24–31 (2011).
D. E. Kobzev, G. S. Baronin, V. M. Dmitriev, et al., “Intensification of solid-phase plunger extrusion of a nanomodified polyethyelene of high density by ultrasonic action,” Materialovedenie, No. 4, 37–40 (2012).
Yu. K. Mashkov, O. A. Mamaev, Z. N. Ovchar, et al., Patent 2307130 (Russian Federation), IPC C08J5/16, “A polymer antifriction composite material,” publ. Sept. 27, 2007, Byull., No. 27.
D. A. Negrov and E. N. Yeremin, “Development of an ultrasonic tool for the fabrication of articles from polymer composition materials,” Tekhnol. Mashinostr., No. 5, 44–47 (2012).
Yu. K. Mashkov, Tribophysics and the Properties of Filled Fluoroplastic [in Russian], Izd. OmGTU, Omsk (1997).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 10, pp. 46–48, October, 2013.
Rights and permissions
About this article
Cite this article
Eremin, E.N., Negrov, D.A. Development of a Technology for the Fabrication of Articles Made of Complex-Modified Polytetrafluoroethylene for Dry Friction Assemblies. Chem Petrol Eng 49, 701–704 (2014). https://doi.org/10.1007/s10556-014-9822-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-014-9822-0