Improved physical and mathematical models of polymer melting in screw extruder channels are proposed. The basic distinction of these models is that three phases, namely, a solid porous plug, a mixture of melt, solid granule residuals, and gas, and a fully molten material, interact in the melting zone. Distributions of speed and temperature of the material in the screw channels are determined with due regard for the influence of barodiffusion, convection, and collapse of the plug. Evolution of plug collapse and melting processes is studied.
Similar content being viewed by others
References
Z. Tadmor and C. Gogos, Theoretical Principles of Polymer Processing [Russian translation from English], Khimiya, Moscow (1984).
Z. Tadmor and C. G. Gogos, Principles of Polymer Processing, John Wiley & Sons Inc., New York (2006).
B. H. Maddock, “A visual analysis of flow and mixing in extruder screws,” Soc. Plast. Engs. J., 15, No. 5, 383–389 (1959).
L. F. Street, “Plastifying extrusion,” Int. Plast. Eng., 1, No. 6, 289–296 (1961).
R. V. Torner, Theoretical Bases of Polymer Reworking [in Russian], Khimiya, Moscow (1977).
C. I. Chung, “A new theory for single-screw extrusion, Pt. 1,” Modern Plast., 45, No. 13, 178–198 (1968).
R. C. Donovan, “A theoretical melting model for plasticating extruders,” Polymer Eng. Sci., 11, No. 3, 247–257 (1971).
I. R. Edmondson and R. T. Fenner, “Melting of thermoplastics in single screw extruders,” Polymer, 16, No. 1, 49–56 (1975).
J. Shapiro, A. L. Halmos, and J. R. A. Pearson, “Melting in single screw extruders, Pt. 1: The mathematical model,” Polymer, 17, No. 10, 905–918 (1976).
N. I. Basov, I. N. Volodin, Yu. V. Kazankov, et al., “Hydrodynamics and heat exchange in melting process in extruder screw channel,” Teor. Osn. Khim. Tekhnol., 17, No. 1, 72–78 (1983).
N. M. Trufanova, A. G. Shcherbinin, and V. I. Yankov, Melting of Polymers in Extruders [in Russian], Institute of Computer Research. Regular and Chaotic Dynamics, Moscow–Izhevsk (2009).
A. S. Sakharov, A. E. Kolosov, A. L. Sokolskii, and V. I. Sivetskii, “Modeling of mixing of polymer composites in an extrusion drum mixer,” Khim. Neftegaz. Mashinostr., No. 12, 3–7 (2011).
D. Anderson, J. Tannehill, and R. Fletcher, Computational Hydrodynamics and Heat Exchange [Russian translation from English], Mir, Moscow (1990).
A. S. Sakharov and I. Altenbakh (eds.), Finite-Element Method in Mechanics of Solid Body [in Russian], Vishcha Shkola, Kiev (1982).
V. V. Kirichevskii and A. S. Sakharov, Nonlinear Problems of Thermomechanics of Structures from Poorly Compressible Elastomers, Budivelnik, Kiev (1992).
O. S. Sakharov, V. Yu. Shcherbina, O. V. Gondlyakh, and V. Sivetskii, SAPR, Integrovana Sistema Modelyuvannya Tekhnologichnykh Protsesiv i Rozrakhunku Obladnannya Khimichnoi Promislovosti [in Ukrainian], TOV Poligraf Konsalting, Kiev (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 6, pp. 3–7, June, 2013.
Rights and permissions
About this article
Cite this article
Sakharov, A.S., Kolosov, A.E., Sivetskii, V.I. et al. Modeling of Polymer Melting Processes in Screw Extruder Channels. Chem Petrol Eng 49, 357–363 (2013). https://doi.org/10.1007/s10556-013-9755-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-013-9755-z