A scheme is proposed for preparing powder materials with introduction into their composition of viscoelastic components by embrittlement with subsequent cryogenic reduction. Analysis results are provided for the mechanism of structure formation of powder mixtures based on polymers by cryogenic methods. A calculation model is developed for determining the required energy consumption for polymer reduction at low temperature. Future areas are determined for improving preparation of mixtures containing polymer binders.
Similar content being viewed by others
References
Yu. A. Tret’yakov, N. N. Oleinikov, and A. P. Mozhaev, Bases of Cryochemical Technology [in Russian], Vysshaya Shkola, Moscow (1987).
M. B. Generalov, Main Processes and Equipment for Industrial Explosive Substance Technology [in Russian], IKTs Akademkniga, Moscow (2004).
A. K. Rundquist, “General equation for crushing rules,” Scientific-Technical Information Bulletin of the Mekhanobr Institute, No. 2 (1956).
A. M. Kutepov (ed.), Chemical Technology Processes and Equipment, Vol. 2 [in Russian], Tsentr Integratsiya, Moscow (2001).
Author information
Authors and Affiliations
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 1, pp. 18–22, January, 2009.
Rights and permissions
About this article
Cite this article
Ermoshin, N.G., Tin’kov, O.V., Varenykh, N.M. et al. Cryogenic processing of polymer binders in the production of mixed powder products. Chem Petrol Eng 45, 15–21 (2009). https://doi.org/10.1007/s10556-009-9136-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-009-9136-9