Conditions for the synthesis of modifiers based on acrylamide and acetic acid in order to obtain a lignosulfonate reagent for drilling fluids were determined. The ratios of the initial components and the temperature and the length of the process were varied in order to select the optimum conditions for synthesis of the modifier followed by dispersion of the sodium lignosulfonate in the mass. The particle size distribution was investigated in order to study the change in the structure of the sodium lignosulfonate macromolecule. The surface activity of the experimental samples was investigated by the stalagmometric method (the counting of drops). The effectiveness of the synthesized modifier and lignosulfonate reagent in regulation of the parameters of drilling mud was demonstrated.
Similar content being viewed by others
References
I. T. Mishchenko, A. T. Kondratyuk, Features of the Development of Oil Fields with Difficultly Recovered Reserves [in Russian], Neft’ i Gaz, Moscow (1996), 190 pp.
N. J. Adams, Drilling Engineering: A Complete Well Planning Handbook, Pennwell Books, Tulsa (1985), 123 pp.
M. S. Al-Yasiri, W. T. Al-Sallami , American Journal of Nano Research and Applications, No. 3 (3), pp. 41-45 (2015).
R. M. Annis, V. M. Smith, Revised Edition Exxon Company USA, No. 22, 142 (1996).
G. Fiorani, C. Crestini, M. Selva, et al., Frontiers in Chemistry, No. 8, 797 (2020).
M. I. R. Barbosa, Bentonites Treated with Polymeric Additives for Application in Drilling Fluids. Master Thesis Federal University of Campina Grande., Campina Grande, Brazil (2006), 125 pр.
D. P. Alazigha, B. Indraratna, J. Vinod, et al., Transportation Geotechnics, No.14, 81 (2018).
A. D. Badikova, I. N. Kulyashova. F. Kh. Kudasheva, Bashirskii Khimicheskii Zhurnal, 21, 84-86 (2014).
I. N. Kulyashova, R. S. Begalieva, Zh. E. Dzhakupova, Bashkirskii Khimicheskii Zhurnal, 27, No. 3, 62-67 (2020).
A. D. Badikova, G. A. Teptereva, I. N. Kulashova, et al., Improvement of the Production of Chromium Lignosulfonate Drilling Reagents [in Russian], Izd-vo Bashirskogo Gosudarstvennogo Universiteta, Ufa (2015), 108 pp.
R. A. Fedina, A. D. Badikova, A. G. Mustafin, et al., Bashkirskii Khimicheskii Zhurnal 26, No. 1, 62-69 (2019).
V. V. Kukin, Yu. V. Solyakov, The Use of Water-Soluble Polymers for Enhanced Oil Recovery [in Russian] (1982), 44 pp.
I. B. Gulomova, M. G. Mukhamediev, Universum: Khimiya i Biologiya, No. 2(32) (2017. URL: http://7universum.com/ru/nature/ archive/item/4177.
N. A. Petrov, Neftegazovoe Delo, No. 1, 1-19 (2016).
I. B. Gulomova, S. M. Khazratkulova, Universum: Khimiya i Biologiya, No. 10(28) (2016). URL: http://7universum.com/ru/nature/archive/item/4177.
I. N. Kulyashova, A. D. Balikova, A. R. Safina, Bashkirskii Khimicheskii Zhurnal, 29, No. 2, 48-52 (2022).
V. P. Borovikov, Statistica. The Art of Computer Data Analysis: for Professionals, A. M. Gorky State Enterprise Printing Yard (2003), 688 pp.
A. V. Kosykh, Sistemy. Metody. Tekhnologiya. No. 2, 132-136 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 5, pp. 72–78 September–October, 2022.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kulyashova, I.N., Safina, A.R., Badikova, A.D. et al. Determination of the Optimum Conditions for Synthesis of Modifying Additive Based on Acrylamide and Citric Acid with the Aim of Obtaining a Lignosulfonate Reagent for Drilling Fluids. Chem Technol Fuels Oils 58, 802–808 (2022). https://doi.org/10.1007/s10553-022-01454-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10553-022-01454-9