Skip to main content
Log in

Performance Research and Field Application of the Knot Temporary Plugging Agent

  • INNOVATIVE TECHNOLOGIES OF OIL AND GAS
  • Published:
Chemistry and Technology of Fuels and Oils Aims and scope

Temporary plugging technology is widely used in the volume fracturing of horizontal wells. However, conventional temporary plugging balls and particles can’t effectively plug perforations during fracturing. This research designed a completely degradable, tassel-shaped rope knot temporary plugging agent, and it has an excellent degradation and plugging performance. The knot temporary plugging agent’s solubility, crushing rate, temperature and shear resistance were evaluated. The knot temporary plugging agent can completely degrade into CO2 and water in a clean water environment. According to the physical model of the transparent tube, the knot temporary plugging agent can quickly enter the perforation with the help of the tassel-shaped wings to form an effective plugging. Compared with the conventional temporary plugging ball, the ability to enter the perforation and the plugging performance were superior. The field application of the knot temporary plugging agent in MaHW#5 well showed that the temporary plugging effect was good.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.

Similar content being viewed by others

References

  1. Li N.Y.; Yu, J.J.; Wang, C.; Zhang, S.W.; Liu, X.K.; Kang, J.; Wang, Y.; Dai, Y.H. Fracturing technology with carbon dioxide: A review. J. Petrol. Sci. Eng. 2021, 205, 108793.

    Article  CAS  Google Scholar 

  2. Chen, X.; Zhao, L.Q.; Liu, P.L.; Du, J.; Wang, Q.; An, Q.; Chang, B.; Luo, Z.F.; Zhang, N.L. Experimental study and field verification of fracturing technique using a thermo-responsive diverting agent. J. Nat. Gas. Sci. Eng. 2021, 92, 1033993.

    Google Scholar 

  3. Huang, X.B.; Meng, X.; Lv, K.H.; Zhang, Z.; Cao, L.H.; Wang, R.; Feng, J.; Wu, Y.C.; Sheng, W.B. Development of a high temperature resistant nano-plugging agent and the plugging performance of multi-scale micropores. Colloid. Surface. A. 2022, 639, 128275.

    Article  CAS  Google Scholar 

  4. Fang, J.H.; Jiao, B.L.; Zhao, G.; He, L.; Wu, Y.N.; Dai, C.L. Study on the channel flow control regulation of particle agents in fractured-vuggy carbonate reservoirs via CFD-DEM coupling method. J. Petrol. Sci. Eng. 2019, 180, 495-503.

    Article  CAS  Google Scholar 

  5. Wang, K.L.; Liu, G.Z.; Guo, Y.Y.; Yang, H.; Chen, Z.H.; Su, G.S.; Wang, Y.Q.; Wei, B.; Yu, X.R. Preparation and properties of degradable hydrogels as a temporary plugging agent used for acidizing treatments to enhance oil recovery. Colloid. Surface. A. 2022, 637, 128218.

    Article  CAS  Google Scholar 

  6. Zhao, S.D.; Zhu, D.Y.; Bai, B.J. Experimental study of degradable preformed particle gel (DPPG) as temporary plugging agent for carbonate reservoir matrix acidizing to improve oil recovery. J. Petrol. Sci. Eng. 2021, 205, 108760

    Article  CAS  Google Scholar 

  7. Li, W.Q.; Jiang, G.C.; Ni, X.X.; Li, Y.Y.; Wang, X.Z.; Luo, X.G. Styrene butadiene resin/nano-SiO2 composite as a waterand-oil-dispersible plugging agent for oil-based drilling fluid. Colloid. Surface. A. 2020, 606, 125245.

    Article  CAS  Google Scholar 

  8. Zhao, J.S.; Li, T.T.; Shi, Y.; An, C.Q.; Liu, Y.L. A new sinking agent used in water-control fracturing for low-permeability/bottom-water reservoirs: Experimental study and field application. J. Petrol. Sci. Eng. 2019, 177, 215-223.

    Article  CAS  Google Scholar 

  9. Zhu, D.Y.; Xu, Z.H.; Sun, R.X.; Fang, X.Y.; Gao, D.W.; Jia, X.B.; Hu, J.R.; Weng, J.T. Laboratory evaluation on temporary plugging performance of degradable preformed particle gels (DPPGs). Fuel. 2021, 289, 119743.

    Article  CAS  Google Scholar 

  10. Xiong, C.M.; Shi, Y.; Zhou, F.J.; Liu, X.F.; Yang, X.Y.; Yang, X.T. High efficiency reservoir stimulation based on temporary plugging and diverting for deep reservoirs. Petrol. Explor. Dev+. 2018, 45(5), 948-954

    Article  Google Scholar 

  11. Yang, E.L.; Fang, Y.J.; Liu, Y.S.; Li, Z.Q.; Wu, J. Research and application of microfoam selective water plugging agent in shallow low-temperature reservoirs. J. Petrol. Sci. Eng. 2020, 193, 107354.

    Article  CAS  Google Scholar 

  12. Zhou, F.J.; Su, H.; Liang, X.Y.; Meng, L.F.; Yuan, L.S.; Li, X.H.; Liang, T.B. Integrated hydraulic fracturing techniques to enhance oil recovery from tight rocks. Petrol. Explor. Dev+. 2019, 46(5), 1065-1072.

    Article  Google Scholar 

  13. Zhao, L.Q.; Chen, X.; Zou, H.L.; Liu, P.L.; Liang, C.; Zhang, N.L.; Li, N.Y.; Luo, Z.F.; Du, J. A review of diverting agents for reservoir stimulation. J. Petrol. Sci. Eng. 2020, 187, 106734.

    Article  CAS  Google Scholar 

  14. Yuan, L.S.; Zhou, F.J.; Li, M.H.; Wang, B.; Bai, J.W. Experimental and numerical investigation on particle diverters transport during hydraulic fracturing. J. Nat. Gas. Sci. Eng. 2021, 96, 104290.

    Article  Google Scholar 

  15. Wang, D.B.; Dong, Y.C.; Sun, D.L.; Yu, B. A three-dimensional numerical study of hydraulic fracturing with degradable diverting materials via CZM-based FEM. Eng. Fract. Mech. 2020, 237, 107251.

    Article  Google Scholar 

  16. He, J.Y.; Okere, C.J.; Su, G.D.; Hu, P.J.; Zhang, L.S.; Xiong, W.; Li, Z.H. Formation damage mitigation mechanism for coalbed methane wells via refracturing with fuzzy-ball fluid as temporary blocking agents. J. Nat. Gas. Sci. Eng. 2021, 90, 103956.

    Article  CAS  Google Scholar 

  17. Jia, H.; Niu, C.C.; Yang, X.Y. Improved understanding nanocomposite gel working mechanisms: From laboratory investigation to wellbore plugging application. J. Petrol. Sci. Eng. 2020, 191, 107214.

    Article  CAS  Google Scholar 

  18. Wang, D.B.; Zhou, F.J.; Ding, W.; Ge, H.K.; Jia, X.F.; Shi, Y.; Wang, X.Q.; Yan, X.M. A numerical simulation study of fracture reorientation with a degradable fiber-diverting agent. J. Nat. Gas. Sci. Eng. 2015, 25, 215-225.

    Article  Google Scholar 

  19. Li, M.H.; Zhou, F.; Sun, Z.H.; Dong, E.J.; Yuan, L.S.; Wang, B. Experimental study on plugging performance and diverted fracture geometry during different temporary plugging and diverting fracturing in Jimusar shale. J. Pet. Sci. Eng. 2022, 110580.

  20. Xu, C.Y.; Zhang, H.L.; Kang, Y.L.; Zhang, J.Y.; Bai, Y.R.; Zhang, J.; You, Z.J. Physical plugging of lost circulation fractures at microscopic level. Fuel. 2022, 317, 123477.

    Article  CAS  Google Scholar 

  21. Wang, M.X.; Wang, J.; Cheng, F.S.; Chen, X.L.; Yang, X.D.; Lv, W.J.; Wang, B. Diverter plugging pattern at the fracture mouth during temporary plugging and diverting fracturing: An experimental study. Energy. Rep. 2022, 8, 3549-3558.

    Article  Google Scholar 

  22. Zhou, H.T.; Wu, X.T.; Song, Z.X.; Zheng, B.X.; Zhang, K. A review on mechanism and adaptive materials of temporary plugging agent for chemical diverting fracturing. J. Pet. Sci. Eng. 2022, 212, 110256

    Article  CAS  Google Scholar 

  23. Kang, W.L.; Wang, J.Q.; Ye, Z.Q.; Gu, G.J.; Li, W.M.; Yang, H.B.; Li, H.; Xu, H.X.; Lv, Z.Q.; Sarsenbekuly, B. Study on preparation and plugging effect of sawdust gel particle in fractured reservoir. J. Pet. Sci. Eng. 2022, 212, 110358.

    Article  CAS  Google Scholar 

  24. Zhu, B.Y.; Tang, H.M.; Yin, S.L.; Chen, G.Y.; Zhao, F.; Li, L. Experimental and numerical investigations of particle plugging in fracture-vuggy reservoir: A case study. J. Pet. Sci. Eng. 2022, 208, 109610.

    Article  CAS  Google Scholar 

  25. Luo, M.L.; Si, X.D.; Li, M.Z.; Huang, Y.G.; Li, Q.P.; Li, C.X. Experimental study on the temporary plugging performance of magnetic responsive hydrogel in hydraulic fracturing of hydrocarbon reservoirs. Colloid. Surface. A. 2022, 646, 128981.

    Article  CAS  Google Scholar 

  26. Bai, Y.R.; Zhang, Q.T.; Sun, J.S.; Shang, X.S.; Lv, K.H.; Wang, F. Disproportionate filtration behaviors of polymer/chromium gel used for fracture plugging. J. Mol. Liq. 2021, 343, 117567.

    Article  CAS  Google Scholar 

  27. Wang, T.; Chen, M.; Wu, J.; Lu, J.K.; Luo, C.; Chang, Z. Making complex fractures by re-fracturing with different plugging types in large stress difference reservoirs. J. Pet. Sci. Eng. 2021, 201, 108413.

    Article  CAS  Google Scholar 

  28. Xu, C.Y.; Zhang, J.Y.; Kang, Y.L.; Xu, F.; Lin, C.; Yan, X.P.; Jing, H.R.; Shang, X.G. Structural formation and evolution mechanisms of fracture plugging zone. Petrol. Explor. Dev+. 2021, 48(1), 232-242.

    Article  Google Scholar 

  29. Zhang, Y.; Yu, R.G.; Yang, W.D.; Tian, Y.; Shi, Z.C.; Sheng, C.X.; Song, Y.S.; Du, H.Z. Effect of temporary plugging agent concentration and fracturing fluid infiltration on initiation and propagation of hydraulic fractures in analogue tight sandstones. J. Petrol. Sci. Eng. 2022, 210, 110060.

    Article  CAS  Google Scholar 

  30. Feng, W.; Yang, C.; Zhou, F.J. Experimental study on surface morphology and relevant plugging behavior within acidetched and unetched fractures. J. Nat. Gas. Sci. Eng. 2021, 88, 103847.

    Article  Google Scholar 

  31. Sun, J.S.; Bai, Y.R.; Cheng, R.C.; Lyu, K.H.; Liu, F.; Feng, J.; Lei, S.F.; Zhang, J.; Hao, H.J. Research progress and prospect of plugging technologies for fractured formation with severe lost circulation. Petrol. Explor. Dev+. 2021, 48(3), 732-743.

    Article  Google Scholar 

  32. Zhang, R.X.; Hou, B.; Tan, P.; Muhadasi, Y.; Fu, W.N.; Dong, X.M.; Chen, M. Hydraulic fracture propagation behavior and diversion characteristic in shale formation by temporary plugging fracturing. J. Petrol. Sci. Eng. 2022, 190, 107063

    Article  CAS  Google Scholar 

  33. Xu, C.Y.; Yan, X.P.; Kang, Y.L.; You, L.J.; Zhang, J.Y. Structural failure mechanism and strengthening method of fracture plugging zone for lost circulation control in deep naturally fractured reservoirs. Petrol. Explor. Dev+. 2020, 47(2), 430-440.

    Article  Google Scholar 

  34. Yuan, L.S.; Zhou, F.J.; Li, B.; Gao, J.J.; Yang, X.D.; Cheng, J.Q.; Wang, J. Experimental study on the effect of fracture surface morphology on plugging efficiency during temporary plugging and diverting fracturing. J. Nat. Gas. Sci. Eng. 2020, 81, 103459.

    Article  Google Scholar 

  35. Yang, C.; Feng, W.; Zhou, F.J. Formation of temporary plugging in acid-etched fracture with degradable diverters. J. Petrol. Sci. Eng. 2020, 194, 107535.

    Article  CAS  Google Scholar 

  36. Wang, B.; Zhou, F.J.; Yang, C.; Xu, C.; Liu, J.F.; Han, S.B.; Wang, D.B.; Ren, Z.X.; Liang, T.B. A novel experimental method to investigate the plugging characteristics of diversion agents within hydro-fracture. J. Petrol. Sci. Eng. 2019, 183, 106354.

    Article  CAS  Google Scholar 

  37. Jia, H.; Kang, Z.; Zhu, J.Z.; Ren, L.L.; Cai, M.J.; Wang, T.; Xu, Y.B.; Li, Z.J. High density bromide-based nanocomposite gel for temporary plugging in fractured reservoirs with multi-pressure systems. J. Petrol. Sci. Eng. 2021, 205, 108778.

    Article  CAS  Google Scholar 

  38. Zhang, L.F.; Zhou, F.J.; Feng, W.; Pournik, M.; Li, Z.; Li, X.H. Experimental study on plugging behavior of degradable fibers and particulates within acid-etched fracture. J. Petrol. Sci. Eng. 2020, 185, 106455.

    Article  CAS  Google Scholar 

  39. Shi, X.; Zhang, W.D.; Xu, H.X.; Xiao, C.Y.; Jiang, S. Experimental study of hydraulic fracture initiation and propagation in unconsolidated sand with the injection of temporary plugging agent. J. Petrol. Sci. Eng. 2020, 190, 106813.

    Article  CAS  Google Scholar 

  40. Yang, C.; Zhou, F.J.; Feng, W.; Tian, Z.D.; Yuan, L.S.; Gao, L.Y. Plugging mechanism of fibers and particulates in hydraulic fracture. J. Petrol. Sci. Eng. 2019, 176, 396-402.

    Article  CAS  Google Scholar 

  41. Jiang, J.W.; Li, J.; Liu, G.H.; Lian, W.; Xi, Y.; Yang, H.W.; Li, W. Numerical simulation investigation on fracture debonding failure of cement plug/casing interface in abandoned wells. J. Petrol. Sci. Eng. 2020, 192, 107226.

    Article  CAS  Google Scholar 

  42. Zhang, Y.Y.; Zhang, D.X.; Wen, Q.Z.; Zhang, W.; Zheng, S. Development and evaluation of a novel fracture diverting agent for high temperature reservoirs. J. Nat. Gas Sci. Eng. 2021, 93, 104074.

    Article  Google Scholar 

Download references

Acknowledgments

This work was supported by the 2020-2022 major research projects for improving the volume transformation technology of horizontal wells (Upgrading and field test of shale/tight oil and gas volume transformation technology in Xinjiang Oilfield).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jiangwen Xu.

Additional information

Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 3, pp. 109–114 May–June, 2022.

Rights and permissions

Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Xu, J., Wang, J., Wang, M. et al. Performance Research and Field Application of the Knot Temporary Plugging Agent. Chem Technol Fuels Oils 58, 544–553 (2022). https://doi.org/10.1007/s10553-022-01418-z

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10553-022-01418-z

Keywords

Navigation