The development and use of a demulsifier for separation of the fluid obtained after flooding of an oil layer using ASP (alkaline surfactant polymer) are described. The mechanism of separation of the emulsion was investigated. As a result of laboratory studies and tests in the field, it was shown that the demulsifier produces excellent results in separation of such emulsions.
Similar content being viewed by others
References
Wang Demin, Cheng Jiecheng, Wu Junzheng, et al., Summary of ASP Pilots in Daqing Oil Field, SPE 57288 (1999).
Lin Meiqin and Wu Zhaoliang, Fuel, 84, No. 2-3, 183-187 (2005).
Wang Huiyun, Li Mingyuan, Wu Zhaoliang, et al., Chin. J. Chem. Eng., 13, No. 5, 691-695 (2005).
Li Mingyuan, Xu Mingjin, Lin Meiqin, et al., J. Disp. Sci. Technol., 28, No. 1, 189-192 (2007).
Zhang Fusheng, Zhang Yaqin, Cheng Jiecheng, et al., Acta Petrol. Sin. (Petroleum Processing Section), 16, No. 6, 117-120 (2008).
Zhang Fusheng, Zhang Yaqin, Xie Huizhuan, et al., Adv. Fine Petrochem., 6, No. 10, 16-19 (2005).
P. D. Berger, C. Hsu, and J. P. Arendell, Designing and Selecting Demulsifiers for Optimum Field Performance on the Basis of Production Fluid Characteristics, SPE1628 (1988).
Author information
Authors and Affiliations
Additional information
Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 2, pp. 34 – 38, March – April, 2010.
Rights and permissions
About this article
Cite this article
Zhang, F., Ouyang, J., Zhang, H. et al. Demulsifier for separation of liquid obtained in chemical flooding of oil layers. Chem Technol Fuels Oils 46, 112–119 (2010). https://doi.org/10.1007/s10553-010-0196-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10553-010-0196-5