Abstract
High-quality BND 40/60 and BND 60/90 asphalts were made from high-wax Kotur-Tepe crudes with additives — heavy catalytic gasoil, hard asphalt from propane deasphalting, and extracts from selective treatment of oil feedstock — were manufactured in pilot conditions. Production of such asphalts by direct oxidation of vacuum resid is not possible. Optimum feedstock compositions are proposed.
Similar content being viewed by others
REFERENCES
I. B. Grudnikov (1983) Production of Petroleum Asphalts Khimiya Moscow 39–43
I. B. Grudnikov, Khim. Tekhnol. Topl. Masel, No. 12, 16–18 (1976).
V. S. Andreev, V. I. Varavin, V. S. Evseev, et al., NefTepererab. Neftekhim., No. 12, 18–22 (2002).
V. V. Fryazinov, R. S. Akhmetova, I. A. Chernobrivenko, et al., Ibid., No. 7, 2–7 (1977)l.
S. A. Kotov, D. S. Starov, V. A. Morozov, et al., Avtomobil. Dorogi, No. 9, 60–61 (2003).
A. S. Kolbanovskaya A. V. Rudenskii (1973) Organic Binders for Road Construction Transport Moscow
Author information
Authors and Affiliations
Additional information
Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 6, pp. 23 – 26, November– December, 2004
Rights and permissions
About this article
Cite this article
Morozov, V.A., Starov, D.S., Shakhova, N.M. et al. Production of paving asphalts from high-wax crude oils. Chem Technol Fuels Oils 40, 382–388 (2004). https://doi.org/10.1007/s10553-005-0005-8
Issue Date:
DOI: https://doi.org/10.1007/s10553-005-0005-8