Abstract
Surgeons performing robotic-assisted surgical tasks need to establish the density and constituency of hidden tissue structures using only surgical tools. This is possible by integrating a miniaturized sensor into the end-effectors of robotic surgical systems. In this present work, optical microsystems technology is utilized to develop a miniature force-distribution sensor that can be integrated into surgical end-effectors. The sensing principle of the sensor is based on the mechanism of splice coupling. Since the device is fully optical, the sensor is magnetic-resonance compatible and is also electrically passive. The experimental results performed on the developed sensor confirm its ability to measure the distributed force information. Such information is used to detect different tissue structures such as lumps, arteries, or ureters during robotic-assisted surgical tasks.
Similar content being viewed by others
References
R. Ahmadi, J. Dargahi, M. Packirisamy, R. Cecere, A new MRI-compatible optical fiber tactile sensor for use in minimally invasive robotic surgery systems. In Proc. Fourth Eur. Work. Opt. Fiber Sensors 7653, 2Z-1–2Z-4 (2010)
R. Ahmadi, M. Packirisamy, J. Dargahi, Innovative optical microsystem for static and dynamic tissue diagnosis in minimally invasive surgical operations. J. Biomed. Opt. 17(8), 081416 (2012a). 1–8
R. Ahmadi, M. Packirisamy, J. Dargahi, R. Cecere, Discretely-loaded beam-type optical fiber tactile sensor for tissue manipulation and palpation in minimally invasive robotic surgery. IEEE Sensors J. 12(1), 22–32 (2012b)
R. Ahmadi, M. Packirisamy, J. Dargahi, High sensitive force sensing based on the optical fiber coupling loss. J. Med. Devices 7(1), 1–8 (2013)
F.P. Beer, E.R. Johnston, Mechanics of materials (McGraw-Hill, New York, 1981), pp. 396–429
K. Chinzei, R. Kikinis, and F. A. Jolesz, MR compatibility of mechatronic devices: Design criteria, in Proc. 2nd Int. Conf. Med. Image Computing and Computer-Assisted Intervention, (1999) pp. 1020–1030
K. Chinzei, and K. Miller, MRI guided surgical robot, in Proc. 2001 Australian Conference on Robotics and Automation, Sydney, (2001) pp. 50–55
I. Gannot, Optical fibers and sensors for medical applications, SPIE-International Society for Optical Engine, (2001)
P. Gomes, Surgical robotics: reviewing the past, analysing the present, imagining the future. Robot. Comput. Integr. Manuf. 27(2), 261–266 (2011)
A. C. Heijmans, L. K. Cheng, and F. P. Wieringa, Optical fiber sensors for medical applications-practical engineering considerations, in Proc. 4th European Conference of the International Federation for Medical and Biological Engineering (IFMBE), vol. 22, (2008) pp. 2330–2334
T. A. Kern, Engineering Haptic Devices, Springer, 1st Edition, (2009) pp. 321–347
C.-H. King, M.O. Culjat, M.L. Franco, C.E. Lewis, E.P. Dutson, W.S. Grundfest, J.W. Bisley, Tactile feedback induces reduced grasping force in robot-assisted surgery. IEEE Trans. Haptic 2(2), 103–110 (2009a)
C.-H. King, M.O. Culjat, M.L. Franco, J.W. Bisley, G.P. Carman, E.P. Dutson, W.S. Grundfest, A multi-element tactile feedback system for robot-assisted minimally invasive surgery. IEEE Trans. Haptic 2(1), 52–56 (2009b)
J. Li, Q. Zhang, A. Liu, Advanced fiber optical switches using deep RIE (DRIE) fabrication. Sensors Actuators A Phys. 102(3), 286–295 (2003)
S. Nemoto, T. Makimoto, Analysis of splice loss in single-mode fibres using a Gaussian field approximation. Opt. Quant. Electron. 11(5), 447–457 (1979)
P. Polygerinos, D. Zbyszewski, T. Schaeffter, R. Razavi, L.D. Seneviratne, K. Althoefer, MRI-compatible fiber-optic force sensors for catheterization procedures. IEEE Sensors J. 10(10), 1598–1608 (2010a)
P. Polygerinos, P. Puangmali, T. Schaeffter, R. Razavi, L. D. Seneviratne, and K. Althoefer, Novel miniature MRI-compatible fiber-optic force sensor for cardiac catheterization procedures, in Proc. 2010 I.E. International Conference on Robotics and Automation, Alaska, USA, May, (2010) pp. 2598–2603
P. Puangmali, K. Althoefer, L.D. Seneviratne, D. Murphy, P. Dasgupta, State-of-the-art in force and tactile sensing for minimally invasive surgery. IEEE Sensors J. 8(4), 371–381 (2008)
P. Puangmali, K. Althoefer, L.D. Seneviratne, Mathematical modeling of intensity-modulated bent-tip optical fiber displacement sensors. IEEE Trans. Instrum. Meas. 59(2), 283–291 (2010)
E.P. Scilingo, M. Bianchi, G. Grioli, A. Bicchi, Rendering softness: integration of kinesthetic and cutaneous information in a haptic device. IEEE Trans. Haptic 3(2), 109–118 (2010)
S. Sokhanvar, M. Ramezanifard, J. Dargahi, M. Packirisamy, Graphical rendering of localized lumps for MIS applications. J. Med. Devices 1(3), 217–226 (2007)
S. Sokhanvar, M. Packirisamy, J. Dargahi, MEMS endoscopic tactile sensor: toward in-situ and in-vivo tissue softness characterization. IEEE Sensors J. 9(12), 1679–1687 (2009)
H. Su, M. Zervas, C. Furlong, G.S. Fischer, A miniature MRI-compatible fiber-optic force sensor utilizing fabry-perot interferometer. MEMS. Nanotechnol. 4, 131–136 (2011a)
H. Su, M. Zervas, G. Cole, C. Furlong and G. Fischer, Real-time MRI-guided needle placement robot with integrated fiber optic force sensing, in Proc. IEEE International Conference on Robotics and Automation (ICRA), Shanghai, China, (2011b) pp. 1583–1588
K. Taniguchi, E. Kobayashi, S. Joung, M. Ono, N. Motomura, S. Kyo, S. Takamoto, I. Sakuma, A force measurement device using optical fiber for surgical tools-basic concept and implementation. J. Robot. Mechatron. 23(1), 94–104 (2011)
M.C. Yip, S.G. Yuen, R.D. Howe, A robust uniaxial force sensor for minimally invasive surgery. IEEE Trans. Biomed. Eng. 57(5), 1008–1011 (2010)
H. Yousef, M. Boukallel, K. Althoefer, Tactile sensing for dexterous in-hand manipulation in robotics-a review. Sensors Actuators A Phys. 167(2), 171–187 (2011)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ahmadi, R., Arbatani, S., Packirisamy, M. et al. Micro-optical force distribution sensing suitable for lump/artery detection. Biomed Microdevices 17, 10 (2015). https://doi.org/10.1007/s10544-015-9931-3
Published:
DOI: https://doi.org/10.1007/s10544-015-9931-3