Biomedical Engineering

, Volume 46, Issue 4, pp 131–133

Automatic Monitoring of Chest Compression Parameters during Human Cardiopulmonary Resuscitation

  • I. V. Nesterenko
  • S. V. Selishchev
  • D. V. Telyshev
Theory and Design

DOI: 10.1007/s10527-012-9286-5

Cite this article as:
Nesterenko, I.V., Selishchev, S.V. & Telyshev, D.V. Biomed Eng (2012) 46: 131. doi:10.1007/s10527-012-9286-5
  • 100 Downloads

Compression frequency and amplitude are the main parameters that should be monitored during human cardiopulmonary resuscitation (CPR). These parameters can be checked by monitoring the movements of the resuscitator’s hands relative to their initial position on the patient’s chest. Integral sensors of acceleration (accelerometers) can provide such monitoring. The goal of this work was to describe a technique for automatic monitoring of chest compression parameters during human cardiopulmonary resuscitation. The technique is based on data obtained using an accelerometer.

Copyright information

© Springer Science+Business Media New York 2012

Authors and Affiliations

  • I. V. Nesterenko
    • 1
  • S. V. Selishchev
    • 2
  • D. V. Telyshev
    • 2
  1. 1.ZITTS-MT Ltd.MoscowRussia
  2. 2.National Research University of Electronic Technology, ZelenogradMoscowRussia

Personalised recommendations