Abstract
This article deals with the application of an analytical methodology for the large-scale vulnerability assessment of reinforced concrete frame buildings in Italy. This methodology is known in the technical literature with the acronym SP-BELA (Simplified Pushover-Based Earthquake Loss Assessment) and has been adopted by the Eucentre research group to contribute to the production of the seismic risk maps in Italy, published in the National Risk Assessment document. The Italian maps were elaborated using the IRMA platform (Italian Risk MAps), which is a web platform developed by Eucentre. The IRMA platform is only addressed to the scientific community who can use it to share data, methods, and models for the evaluation of the seismic risk in Italy (Borzi et al. in Piattaforma IRMA Italian Risk MAps, 2018; Dolce et al. in Mappe di rischio per il territorio Italiano, 2019a; Faravelli et al. in Italian platform for seismic risk and damage scenario evaluation, 2019a, Borzi et al. in Bull Earthq Eng, 2020, Dolce et al. Bull Earthq Eng, 2020). SP-BELA defines the non-linear behaviour of a random population of buildings through a simplified pushover and a displacement-based procedure. Specifically, displacement capacity limits are identified on the pushover curve and then they are compared with the displacement demand from a response spectrum of each building in the random population. In this way, it is possible to define the probability of exceedance of the damage limits and hence generate the fragility curves. Then, the resulting curves have been calibrated by comparing the damage data observed on the reinforced concrete buildings with the damage analytically calculated with SP-BELA for the earthquakes of Molise 2002 and L’Aquila 2009. The final curves have been uploaded into the IRMA platform and used to produce damage maps for the entire national territory.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
ATC-40 (1997) Seismic Evaluation and Retrofit of Concrete Buildings. Report No. ATC-40. Applied Technology Council 1997, Redwood City, CA
Bolognini D, Borzi B, Pinho R (2008) Simplified pushover-based vulnerability analysis of traditional Italian RC precast structures. In: Proceedings of 14th world conference on earthquake engineering, Beijing, China. Paper N. 09-01-0133
Borzi B, Crowley H, Pinho R (2008a) Simplified pushover-based earthquake loss assessment (SP-BELA) method for masonry buildings. Int J Archit Herit 2:353–376. https://doi.org/10.1080/15583050701828178
Borzi B, Pinho R, Crowley H (2008b) Simplified pushover-based vulnerability analysis for large-scale assessment of RC buildings. Eng Struct 30:804–820. https://doi.org/10.1016/j.engstruct.2007.05.021
Borzi B, Ceresa P, Faravelli M, Fiorini E, Onida M (2011) Nuove mappe di rischio e scenari di danno del territorio nazionale: risultati e confronti con gli studi precedenti. Atti del XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy, Paper N. 803
Borzi B, Faravelli M, Onida M, Polli D, Quaroni D, Pagano M, Di Meo A (2018) Piattaforma IRMA (Italian Risk MAps). 37esimo Convegno Nazionale GNGTS, 19–21 novembre 2018, Bologna, Italy
Borzi B, Onida M, Faravelli M, Polli D, Pagano M, Quaroni D, Cantoni A, Speranza E, Moroni C (2020) IRMA platform for the calculation of damages and risks of Italian residential buildings. Bull Earthq Eng, under review
Borzi B, Di Meo A, Faravelli M, Ceresa P, Monteiro R, Dabeek J (2016) Definition of Fragility Curve for Frame Buildings in Nablus – Palestine. In: 1st International conference on natural hazards and infrastructure ICONHIC, 28–30 June 2016, Chania, Crete Island, Greece
Bramerini F, Di Pasquale G (2008) Updated seismic risk maps for Italy. Ing Sismica 25(2):5–23
Colombi M, Crowley H, Di Capua G, Peppoloni S, Borzi B, Pinho R, Calvi GM (2010) Mappe di rischio sismico a scala nazionale con dati aggiornati sulla pericolosità sismica di base e locale. Progett Sism, vol 1
Cosenza E, Manfredi G, Polese M, Verderame GM (2005) A multi-level approach to the capacity assessment of existing RC buildings. J Earthq Eng 9(1):1–22
Crowley H (2003) Periods of Vibration for Displacement-Based Assessment of RC Buildings. MSc Dissertation, ROSE School, University of Pavia, Italy
Crowley H, Pinho R, Bommer JJ (2004) A probabilistic displacement-based vulnerability assessment procedure for earthquake loss estimation. Bull Earthq Eng 2(2):173–219
Crowley H, Bommer JJ, Stafford PJ (2008) Recent developments in the treatment of ground-motion variability in earthquake loss models. J Earthq Eng 12(S2):71–80. https://doi.org/10.1080/13632460802013529
Crowley H, Colombi M, Borzi B, Faravelli M, Onida M, Lopez M, Polli D, Meroni F, Pinho R (2009) A comparison of seismic risk maps for Italy. Bull Earthq Eng 7:149–180
Del Gaudio C, Ricci P, Verderame GM, Manfredi G (2015) Development and urban-scale application of a simplified method for seismic fragility assessment of RC buildings. Eng Struct 91:40–57. https://doi.org/10.1016/j.engstruct.2015.01.031
Di Meo A, Faravelli M, Borzi B, Pagano M, Cantoni A (2017) Vulnerability data collection and definition of seismic risk for cities in Palestine. In: 6th International conference on computational methods in structural dynamics and earthquake engineering COMPDYN, 15–17 June 2017, Rhodes Island, Greece
Di Pasquale G, Orsini G, Romeo R (2000) Sensitivity analysis in seismic risk assessment. In: Proceedings of the 6th international conference on seismic zonation, Palm Springs, CA
Decreto Ministeriale 10 Gennaio 1907 (1907) Prescrizioni normali per l’esecuzione di opere in cemento armato (in Italian). G. U. del 02/02/1907 n.28, Italy
Decreto Ministeriale 3 Marzo 1975 (1975) Approvazione delle Norme tecniche per le costruzioni in zone sismiche (In Italian). G.U. del 08/04/1975 n. 93, Italy
Decreto Ministeriale 14 Gennaio 2008 (2008) Approvazione delle nuove norme tecniche per le costruzioni (NTC08) (In Italian). G. U. 04/02/2008 n.42, Italy
Decreto Ministeriale 17 Gennaio 2018 (2018) Aggiornamento delle Norme Tecniche per le Costruzioni (NTC) (in Italian). G. U. 20/02/2018 n.42, Italy
Dolce M, Masi A, Marino M, Vona M (2003) Earthquake damage scenarios of the building stock of potenza (Southern Italy) including site effects. Bull Earthq Eng 1(1):115–140
Dolce M, Speranza E, Giordano F, Borzi B, Bocchi F, Conte C, Di Meo A, Faravelli M, Pascale V (2017) Da.D.O. – A web-based tool for analyzing and comparing post-earthquake damage database relevant to national seismic events since 1976. In: Proceedings of the 17th Italian conference on earthquake engineering ANIDIS. Pistoia, Italy, Paper N. 2692
Dolce M, Borzi B, Da Porto F, Faravelli M, Lagomarsino S, Magenes G, Moroni C, Penna A, Prota A, Speranza E, Zuccaro G, Verderame GM (2019a) Mappe di rischio per il territorio Italiano. In: Proceedings of the 18th Italian conference on earthquake engineering ANIDIS. Ascoli Piceno, Italy, Paper N. 3549
Dolce M, Speranza E, Giordano F, Borzi B, Bocchi F, Conte C, Di Meo A, Faravelli M, Pascale V (2019) Observed damage database of past Italian earthquakes: the Da.D.O. Webgis. Boll Geofis Teor Appl 60(2):141–164
Dolce M, Prota A, Borzi B, da Porto F, Lagomarsino S, Magenes G, Moroni C, Penna A, Polese M, Speranza E, Verderame GM, Zuccaro G (2020) Seismic risk assessment of residential buildings in italy: methodology overview and main results. Bull Earthq Eng, (Under review)
FEMA HAZUS (1999) Earthquake Loss Estimation Methodology. Technical Manual. Federal Emergency Management Agency 1999; Washington, D.C
Faravelli M, Borzi B, Di Meo A, Polli D (2017) A mechanic-based model for definition of seismic risk and real time damage scenario of buildings. In: Proceedings of 6th international conference on computational methods in structural dynamics and earthquake engineering, Rhodes Island, Greece, pp 637–651
Faravelli M, Polli D, Quaroni D, Onida M, Pagano M, Di Meo A, Borzi B (2019a) Italian platform for seismic risk and damage scenario evaluation. In: 7th International conference on computational methods in structural dynamics and earthquake engineering COMPDYN, 24–26 June 2019, Crete, Greece
Faravelli M, Borzi B, Polli D, Pagano M (2019) Calibration of a mechanics-based method for large-scale vulnerability assessment. Bull Earthq Eng 17(5):2485–2508. https://doi.org/10.1007/s10518-019-00560-0
Giovinazzi S (2005) The Vulnerability Assessment and the Damage Scenario in Seismic Risk Analysis. PhD Thesis of the Doctoral Course “Risk Management of the built environment”, Technical University Carolo – Wilhelmina at Braunschweig and University of Florence, Italy
GNDT – ING – SSN (1996) Risultati dell’analisi di rischio sismico per tutta la nazione riferita al patrimonio abitativo. Elaborazioni basate sui dati ISTAT 1991. Roma, Italy
Grigoratos I, Dabeek J, Faravelli M, Di Meo A, Cerchiello V, Borzi B, Monteiro R, Ceresa P (2016) Development of a fragility and exposure model for Palestine—application to the city of Nablus. Proc Eng 16:2023–2029
Grünthal G (1998) European Macroseismic Scale 1998 (EMS98). Council of Europe, Cahiers du Centre Européen de Géodynamique et de Sismologie, p 15
Hancilar U, Çaktr E (2015) Fragility functions for code complying RC frames via best correlated IM–EDP pairs. Bull Earthq Eng 13(11):3381–3400. https://doi.org/10.1007/s10518-015-9775-5
INGV-DPC S5 (2007) Definition of seismic input in terms of expected displacements, Technical Report, Italy
ISTAT (1991) (1991) 13° censimento generale della popolazione e delle abitazioni. Istituto Nazionale di Statistica, Roma
ISTAT (2001) (2001) 14° censimento generale della popolazione e delle abitazioni. Istituto Nazionale di Statistica, Roma
Kappos AJ, Pitilakis K, Stylianidis KC (1996) Cost-benefit analysis for the seismic rehabilitation of buildings in thessaloniki, based on a hybrid method of vulnerability assessment. In: 5th International conference on seismic zonation, Nice, France, vol 1, pp 406–413
Legge 25 Novembre 1962 n. 1684 (1962) Provvedimenti per l’edilizia, con particolari prescrizioni per le zone sismiche (In Italian). G.U. del 22/12/1962 n. 326, Italy
Legge 2 Febbraio 1974 n. 64 (1974) Provvedimenti per le costruzioni con particolari prescrizioni per le zone sismiche (In Italian). G.U. del 21/03/1974 n. 76, Italy
Lucantoni A, Bosi V, Bramerini F, De Marco R, Lo Presti T, Naso G, Sabetta F (2001) Seismic risk in Italy. Ing Sism 17(1):5–36
Lagomarsino S, Giovinazzi S (2006) Macroseismic and mechanical models for the vulnerability and damage assessment of the current buildings. Bull Earthq Eng 4(4):415–443. https://doi.org/10.1007/s10518-006-9024-z
National Risk Assessment (2018) Overview of the potential major disasters in Italy. Updated December 2018, Italian Civil Protection Department
Ordinanza del Consiglio dei Ministri (OPCM) 20 Marzo 2003 n. 3274 (2003) Primi elementi in materia di criteri generali per la classificazione sismica del territorio nazionale e normative tecniche per le costruzioni in zona sismica (In Italian). G.U. del 08/05/2003 n. 105, Italy
Oliveto G, Liberatore L, Decanini LD (2011) Evoluzione storica della normativa sismica italiana alla luce degli effetti causati dal terremoto dell’Aquila del 2009. Atti del XIV Convegno L’Ingegneria Sismica in Italia ANIDIS 2011, Bari, Italy, Paper N. 1188
Pinho R, Bommer JJ, Glaister S (2002) A Simplified Approach to Displacement Based Earthquake Loss Estimation Analysis. 12th European Conference on Earthquake Engineering, London, England, Paper N. 738
Pinto PE, Giannini R, Franchin P (2004) Methods for seismic reliability analysis of structures. IUSS Press, Pavia
Pitilakis KD, Karapetrou ST, Fotopoulou SD (2014) Consideration of aging and SSI effects on seismic vulnerability assessment of RC buildings. Bull Earthq Eng 12(4):1755–1776. https://doi.org/10.1007/s10518-013-9575-8
Priestley MJN, Calvi GM (1991) Towards a capacity design assessment procedure for reinforced concrete frames. Earthq Spectra 7(3):413–437
Regio Decreto Legge 13 Marzo 1927 n. 431 (1927) Norme tecniche ed igieniche di edilizia per le località colpite dai terremoti (In Italian). G. U. del 08/04/1927 n. 82, Italy
Regio Decreto Legge 16 Novembre 1939 n. 2228 e n. 2229 (1939) (In Italian). G.U. del 18/04/1940 n. 92, Italy
Regio Decreto Legge 22 Novembre 1937 n. 2105 (1937) Norme tecniche ed igieniche per le riparazioni, ricostruzioni e nuove costruzioni degli edifici pubblici e privati nei comuni o frazioni di comune dichiarati zone sismiche (In Italian). G.U. del 27/12/1937 n.298, Italy
Regio Decreto Legge 29 Aprile 1915 n. 573 (1915) Norme tecniche ed igieniche da osservarsi per i lavori edilizi nelle località colpite dal terremoto del 13/01/1915 (In Italian). G. U. del 11/05/1915 n.117, Italy
Rossetto T, Elnashai A (2005) A new analytical procedure for the derivation of displacement-based vulnerability curves for populations of RC structures. Eng Struct 7(3):397–409
Sabetta F, Goretti A, Lucantoni A (1998) Empirical fragility curves from damage surveys and estimated strong ground motion. In: Proceedings of the 11th European conference on earthquake engineering, Paris, France
Silva V, Crowley H, Pinho R, Varum H (2014) Investigation of the characteristics of Portuguese regular moment-frame RC buildings and development of a vulnerability model. Bull Earthq Eng 13(5):1455–1490
Silva V, Crowley H, Pagani M, Monelli D, Pinho R (2014) Development of the openquake engine, the global earthquake model’s open-source software for seismic risk assessment. Nat Hazards 72(3):1409–1427. https://doi.org/10.1007/s11069-013-0618-x
Singhal A, Kiremidjian AS (1996) Method for probabilistic evaluation of seismic structural damage. ASCE J Struct Eng 122(12):1459–1467
Stucchi M, Akinci A, Faccioli E, Gasperini P, Malagnini L, Meletti C, Montaldo V, Valensise G (2004) Mappa di Pericolosità sismica del territorio Nazionale https://zonesismiche.mi.ingv.it/documenti/rapporto_conclusivo.pdf
Sendai Framework for Disaster Risk Reduction 2015–2030 (2015) United Nations Office for Disaster Risk Reduction (UNISDR)
Stucchi M, Meletti C, Montaldo V et al (2011) Seismic hazard assessment (2003–2009) for the Italian building code. Bull Seismol Soc Am. https://doi.org/10.1785/0120100130
Tsionis G, Fardis MN (2014) Seismic fragility curves for reinforced concrete buildings and bridges in Thessaloniki. The 2nd European conference on earthquake engineering and seismology, Istanbul, Turkey
Vona M (2002) Caratterizzazione tipologica degli edifici in c.a. esistenti progettati a soli carichi verticali finalizzata alla valutazione della resistenza sismica in presenza di degrado ciclico. Tesi di Dottorato, Università degli Studi “G. D’Annunzio” di Chieti, Italy
Vona M (2014) Fragility curves of existing RC buildings based on specific structural performance levels. Open J Civil Eng 4:120–134. https://doi.org/10.4236/ojce.2014.42011
Zuccaro G (2004) Inventario e vulnerabilità del patrimonio edilizio residenziale del territorio nazionale, mappe di rischio e perdite socio – economiche. Napoli, Italy
Acknowledgments
The current study has been beneficiary of Italian Department of Civil Protection funds. However, this does not necessarily reflect the ideas and official policy of the department. The authors would like to express their gratefulness to the developers working group of Eucentre without which it would not have been possible to develop the calibration of the methodology and the production of the damage scenarios. They are Marco Pagano, Mauro Onida, Diego Polli, Davide Quaroni and Alessio Cantoni. Pictures of damages occurred during past earthquakes have been obtained by the photographic database that Eucentre has been building participating to post-earthquake surveys in support to DPC.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Borzi, B., Faravelli, M. & Di Meo, A. Application of the SP-BELA methodology to RC residential buildings in Italy to produce seismic risk maps for the national risk assessment. Bull Earthquake Eng 19, 3185–3208 (2021). https://doi.org/10.1007/s10518-020-00953-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10518-020-00953-6