Abstract
A pre-normative assessment is presented for the q-factor of the FUSEIS pin-link steel lateral load resisting system for use in low/mid-rise buildings, within Eurocode 8. It is achieved by using the INNOSEIS methodology, a performance based methodological procedure to define behaviour factors for innovative systems. Applying this methodology, consistent behaviour factors can be obtained based on the definition of a set of structures to represent each class of buildings, with the use of nonlinear static and dynamic analysis methods and the incorporation of the effect of aleatory and epistemic uncertainty on the actual systems’ performance, to reach a uniform level of safety across the entire building population.
Similar content being viewed by others
References
ASCE (2014) Seismic evaluation and retrofit of existing buildings. Standard ASCE/SEI 41-13. ISBN 978-0-7844-1285-5
Bakalis K, Vamvatsikos D (2018) Seismic fragility functions via nonlinear response history analysis. J Struct Eng 144(10):04018181. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002141
Baker JW, Cornell CA (2006) Which Sa are you using? Earthq Spectra 22(2):293–312
CEN (2005a) Eurocode 1: actions on structures. Standard EN1991. European Committee for Standardization, Brussels
CEN (2005b) Eurocode 3: design of steel structures. Standard EN1993. European Committee for Standardization, Brussels
CEN (2005c) Eurocode 8: design of structures for earthquake resistance. Standard EN1998. European Committee for Standardization, Brussels
CEN (2005d) Eurocode 8: design of structures for earthquake resistance, part 1–4 design of buildings. Standard EN1998-1-4. European Committee for Standardization, Brussels
Cordova P, Deierlein G, Mehanny SF, Cornell CA (2001) Development of a two-parameter seismic intensity measure and probabilistic design procedure. The second U.S.–Japan workshop on performance-based earthquake engineering methodology for reinforced concrete building structures, Sapporo, Hokkaido
Dimakogianni D (2016) Innovative seismic resistant systems FUSEIS with ductile pins. PhD Thesis, NTUA, Institute of Steel Structure
Dimakogianni D, Georgia D, Vayas I (2015) Seismic behavior of frames with innovative energy dissipation systems (FUSEIS 1-2). Eng Struct 90(2015):83–95. https://doi.org/10.1016/j.engstruct.2015.01.054
Dougka G (2016) Development of seismic resistant systems for multi-story buildings. PhD Thesis, NTUA, Institute of Steel Structure
Giannopoulos D, Vamvatsikos D (2018) Ground motion records for seismic performance assessment: to rotate or not to rotate? Earthq Eng Struct Dyn 47(12):2410–2425. https://doi.org/10.1002/eqe.3090
Giardini D, Woessner J, Danciu L, Crowley H, Cotton F, Grünthal G et al (2013) Seismic hazard harmonization in Europe (SHARE). https://doi.org/10.12686/sed-00000001-share
INNOSEIS consortium (2017) Project website. www.innoseis.ntua.gr. Accessed 5 Apr 2019
Kazantzi AK, Vamvatsikos D (2015) Intensity measure selection for vulnerability studies of building classes. Earthq Eng Struct Dyn 44(15):2677–2694. https://doi.org/10.1002/eqe.2603
Kohrangi M, Vamvatsikos D (2016) INNOSEIS ground motion set for high seismicity European sites. http://innoseis.ntua.gr/high_record_set.rar
Kohrangi M, Vamvatsikos D, Bazzurro P (2017a) Site dependence and record selection schemes for building fragility and regional loss assessment. Earthq Eng Struct Dyn. https://doi.org/10.1002/eqe.2873
Kohrangi M, Bazzurro P, Vamvatsikos D, Spillatura A (2017b) Conditional spectrum-based ground motion record selection using average spectral acceleration. Earthq Eng Struct Dyn 44:657–675. https://doi.org/10.1002/eqe.2876
Lin T, Haselton CB, Baker JW (2013a) Conditional spectrum-based ground motion selection. Part I: hazard consistency for risk-based assessments. Earthq Eng Struct Dyn 42(12):1847–1865. https://doi.org/10.1002/eqe.2301
Lin T, Haselton CB, Baker JW (2013b) Conditional spectrum-based ground motion selection. Part II: intensity-based assessments and evaluation of alternative target spectra. Earthq Eng Struct Dyn 42(12):1867–1884. https://doi.org/10.1002/eqe.2303
Macedo L, Silva A, Castro JM (2019) A more rational selection of the behaviour factor for seismic design according to Eurocode 8. Eng Struct 188:69–86
OpenSees (2016) Open system for earthquake engineering simulation, Edition 2.5.0. University of California Berkeley
Plumier A, Doneux C, Castiglioni C, Brescianini J, Crespi A, Dell’ Anna S, Lazzarotto L, Calado L, Ferreira J, Feligioni S, Bursi OS, Ferrario F, Sommavilla M, Vayas I, Thanopoulos P Demarco T (2006) Two Innovations for earthquake resistant design—the INERD project—final report. Research Programme of the Research Fund for Coal and Steel. Steel RTD, Report EUR22044EN
SAP2000, CSI, Computers and Structures Inc. www.csiberkeley.com
SymDeck Designer, The ELASTRON Group. http://www.elastron.gr/gr/en/home/
Thanopoulos P (2006) Behaviour of seismic resistant steel frames with energy absorbing devices. PhD Thesis, NTUA, Institute of Steel Structure
Tsarpalis P (2017) Design of buildings with innovative anti-seismic systems FUSEIS. Master Thesis, NTUA, Institute of Steel Structure, ISS MT 2017/17
Vamvatsikos D, Cornell CA (2002) Incremental dynamic analysis. Earthq Eng Struct Dyn 31(3):491–514
Vamvatsikos D, Cornell CA (2005) Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information. Earthq Eng Struct Dyn 34(13):1573–1600. https://doi.org/10.1002/eqe.496
Vamvatsikos D, Bakalis K, Kohrangi M, Thanopoulos P, Vayas I, Castiglioni C, Kanyilmaz A et al (2017) Innovative anti-seismic devices and systems—the INNOSEIS project, D2.1 Recommended procedure for EN1998-compatible behaviour factor evaluation of new structural systems. Research Programme of the Research Fund for Coal and Steel. http://innoseis.ntua.gr/deliverables/INNOSEIS_D2.1_QFactorMethodologyReport_revFinal.pdf. Accessed 5 Apr 2019
Vamvatsikos D, Bakalis K, Kohrangi M et al (2019) A risk-consistent approach to determine EN1998 behaviour factors for lateral load resisting systems. Soil Dyn Earthq Eng. https://doi.org/10.1016/j.soildyn.2019.106008
Vayas I, Karydakis P, Dimakogianni D, Dougka G et al (2012a) Dissipative devices for seismic resistant steel frames—the FUSEIS project, final report. Research Programme of the Research Fund for Coal and Steel
Vayas I, Karydakis P, Dimakogianni D, Dougka G, Castiglioni CA, Kanyilmaz A et al (2012b) Dissipative devices for seismic resistant steel frames—the FUSEIS project, design guide. Research Programme of the Research Fund for Coal and Steel
Vayas I, Thanopoulos P, Tsarpalis P, Dimakogianni D (2017a) Innovative anti-seismic devices and systems, chapter 4, 1st ed. ECCS – European Convention for Constructional. ISBN 978-92-9147-136-2
Vayas I, Thanopoulos P, Tsarpalis P, Dimakogianni D (2017b) Innovative anti-seismic devices and systems—the INNOSEIS project, design guides. Research Programme of the Research Fund for Coal and Steel. http://innoseis.ntua.gr/deliverables/INNOSEIS_D3.2_PrenormativeDesignGuidelinesENG.pdf
Vayas I, Thanopoulos P, Tsarpalis P (2017c) Innovative anti-seismic devices and systems—the INNOSEIS project, D4.2. Volume on case studies for mid/high-rise buildings, chapter 5. Research Programme of the Research Fund for Coal and Steel. http://innoseis.ntua.gr/deliverables/INNOSEIS_D4.2_MidHighRiseCaseStudies.pdf
Veletsos AS, Newmark NM (1960) Effect of inelastic behaviour on the response of simple systems to earthquake motions. In: Proceedings of the 2nd world conference on earthquake engineering, vol 2, pp 895–912
Acknowledgements
The authors acknowledge the support of the European Commission through the Research Fund for Coal and Steel (RFCS) Grant Agreement Number 709434.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Tsarpalis, P., Bakalis, K., Thanopoulos, P. et al. Pre-normative assessment of behaviour factor for lateral load resisting system FUSEIS pin-link. Bull Earthquake Eng 18, 2681–2698 (2020). https://doi.org/10.1007/s10518-020-00799-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10518-020-00799-y