Skip to main content
SpringerLink
Log in

Analytical modeling of corroded RC columns considering flexure-shear interaction for seismic performance assessment

  • Original Research
  • Published:
Bulletin of Earthquake Engineering Aims and scope Submit manuscript

Abstract

Corrosion of transverse reinforcement can lead to significant shear capacity deterioration resulting in a ductile-designed reinforced concrete (RC) column to potentially fail in a shear manner. Increased risk of shear failure can be more significant for short shear-critical columns when corrosion occurs. Therefore, shear response can be a particularly important issue in seismic performance assessment of corroded RC columns. An efficient analytical model which can capture the shear capacity deterioration due to corrosion and the flexure-shear interaction behaviors of corroded columns is developed in this work. Corrosion effect on flexural behavior is accounted for through the appropriate modification of steel reinforcement, concrete and bond properties. Shear response is simulated by a new macro zero-length shear spring element, and its shear force-shear deformation relationship is modelled with the Ibarra-Medina-Krawinkler deterioration model that can capture strength and stiffness deterioration as well as pinching behavior. A calibration study is carried out based on a collection of experiments of corroded columns failed in shear. Subsequently empirical formulae for the determination of the modeling parameters of the shear spring are proposed. The proposed model is validated by simulating several corroded columns and compering the predictions obtained with the relevant test data. Results show that the proposed model is able to predict reasonably the overall hysteretic behavior. Corrosion effects on the seismic performance of RC columns are investigated with the proposed model. Results demonstrate that the flexure-shear interaction behaviors should be considered for seismic performance assessment of corroded columns.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3

adapted from Ibarra et al. (2005)

Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

  • Afsar Dizaj E, Madandoust R, Kashani MM (2017) Exploring the impact of chloride-induced corrosion on seismic damage limit states and residual capacity of reinforced concrete structures. Struct Infrastruct Eng 14(6):1–16

    Google Scholar 

  • ASCE (2014) Seismic evaluation and retrofit of existing buildings. ASCE 41-13, Reston, VA

  • Cassese P, De Risi MT, Verderame GM (2018) A modelling approach for existing shear-critical RC bridge piers with hollow rectangular cross section under lateral loads. Bull Earthq Eng 17(1):237–270

    Article  Google Scholar 

  • D’Ambrisi A, Filippou FC (1999) Modeling of cyclic shear behavior in RC members. J Struct Eng 125(10):1143–1150

    Article  Google Scholar 

  • Di Carlo F, Meda A, Rinaldi Z (2017a) Numerical evaluation of the corrosion influence on the cyclic behaviour of RC columns. Eng Struct 153:264–278

    Article  Google Scholar 

  • Di Carlo F, Meda A, Rinaldi Z (2017b) Numerical cyclic behaviour of un-corroded and corroded RC columns reinforced with HPFRC jacket. Compos Struct 163:432–443

    Article  Google Scholar 

  • Du Y, Clark L, Chan A (2005a) Effect of corrosion on ductility of reinforcing bars. Mag Concr Res 57(7):407–419

    Article  Google Scholar 

  • Du Y, Clark L, Chan A (2005b) Residual capacity of corroded reinforcing bars. Mag Concr Res 57(3):135–147

    Article  Google Scholar 

  • Elwood KJ (2004) Modelling failures in existing reinforced concrete columns. Can J Civ Eng 31(5):846–859

    Article  Google Scholar 

  • Elwood KJ, Eberhard MO (2009) Effective stiffness of reinforced concrete columns. ACI Struct J 106(4):476–484

    Google Scholar 

  • Feng DC, Xu J (2018) An efficient fiber beam-column element considering flexure-shear interaction and anchorage bond-slip effect for cyclic analysis of RC structures. Bull Earthq Eng 16(11):1–28

    Article  Google Scholar 

  • Feng DC, Wu G, Sun ZY, Xu JG (2017) A flexure-shear Timoshenko fiber beam element based on softened damage-plasticity model. Eng Struct 140:483–497

    Article  Google Scholar 

  • Feng DC, Xie SC, Deng WN, Ding ZD (2019a) Probabilistic failure analysis of reinforced concrete beam-column sub-assemblage under column removal scenario. Eng Fail Anal 100:381–392

    Article  Google Scholar 

  • Feng DC, Wang Z, Wu G (2019b) Progressive collapse performance analysis of precast reinforced concrete structures. Struct Design Tall Spec Build 28(5):e1588

    Article  Google Scholar 

  • Gokkaya BU, Baker JW, Deierlein GG (2017) Estimation and impacts of model parameter correlation for seismic performance assessment of reinforced concrete structures. Struct Saf 69:68–78

    Article  Google Scholar 

  • Goksu C, Ilki A (2016) Seismic behavior of reinforced concrete columns with corroded deformed reinforcing bars. ACI Struct J 113(5):1053–1064

    Article  Google Scholar 

  • Haselton CB, Liel AB, Deierlein GG, Dean BS, Chou JH (2011) Seismic collapse safety of reinforced concrete buildings. I: assessment of ductile moment frames. J Struct Eng 137(4):481–491

    Article  Google Scholar 

  • Hsu TT, Mo YL (2010) Unified theory of concrete structures. Wiley, New York

    Book  Google Scholar 

  • Ibarra LF, Medina RA, Krawinkler H (2005) Hysteretic models that incorporate strength and stiffness deterioration. Earthq Eng Struct Dyn 34(12):1489–1511

    Article  Google Scholar 

  • Jeon JS, Lowes LN, DesRoches R, Brilakis I (2015) Fragility curves for non-ductile reinforced concrete frames that exhibit different component response mechanisms. Eng Struct 85:127–143

    Article  Google Scholar 

  • Kashani MM (2014) Seismic performance of corroded RC bridge piers: development of a multi-mechanical nonlinear fibre beam-column model. Ph.D. thesis, University of Bristol, Bristol, UK

  • LeBorgne MR, Ghannoum WM (2014a) Calibrated analytical element for lateral-strength degradation of reinforced concrete columns. Eng Struct 81:35–48

    Article  Google Scholar 

  • LeBorgne MR, Ghannoum WM (2014b) Analytical element for simulating lateral-strength degradation in reinforced concrete columns and other frame members. J Struct Eng 140(7):04014038

    Article  Google Scholar 

  • Lee DH, Elnashai AS (2001) Seismic analysis of RC bridge columns with flexure-shear interaction. J Struct Eng 127(5):546–553

    Article  Google Scholar 

  • Lee CS, Han SW (2018) Computationally effective and accurate simulation of cyclic behaviour of old reinforced concrete columns. Eng Struct 173:892–907

    Article  Google Scholar 

  • Lee H, Noguchi T, Tomosawa F (1998) FEM analysis for structural performance of deteriorated RC structures due to rebar corrosion. In: Proceedings of the second international conference on concrete under severe conditions, pp 327–336

  • Lee H-S, Noguchi T, Tomosawa F (2002) Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion. Cement Concr Res 32(8):1313–1318

    Article  Google Scholar 

  • Lee HS, Kage T, Noguchi T, Tomosawa F (2003) An experimental study on the retrofitting effects of reinforced concrete columns damaged by rebar corrosion strengthened with carbon fiber sheets. Cement Concr Res 33(4):563–570

    Article  Google Scholar 

  • Li Q, Niu DT, Xiao QH, Guan X, Chen SJ (2018) Experimental study on seismic behaviors of concrete columns confined by corroded stirrups and lateral strength prediction. Constr Build Mater 162:704–713

    Article  Google Scholar 

  • Liel A, Haselton C, Deierlein G (2011) Seismic collapse safety of reinforced concrete buildings. II: comparative assessment of nonductile and ductile moment frames. J Struct Eng 137(4):492–502

    Article  Google Scholar 

  • Lignos D, Krawinkler H (2008) Sidesway collapse of deteriorating structural systems under earthquake excitations. Rep. No. TB 172, The John A. Blume Earthquake Engineering Center, Stanford University, Stanford, CA

  • Lignos DG, Krawinkler H (2011) Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading. J Struct Eng 137(11):1291–1302

    Article  Google Scholar 

  • Ma Y, Che Y, Gong J (2012) Behavior of corrosion damaged circular reinforced concrete columns under cyclic loading. Constr Build Mater 29:548–556

    Article  Google Scholar 

  • Ma G, Li H, Hwang HJ (2018) Seismic behavior of low-corroded reinforced concrete short columns in an over 20-year building structure. Soil Dyn Earthq Eng 106:90–100

    Article  Google Scholar 

  • Mazzoni S, McKenna F, Scott MH, Fenves GL (2006) OpenSees command language manual. Pacific Earthquake Engineering Research (PEER) Center

  • Meda A, Mostosi S, Rinaldi Z, Riva P (2014) Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns. Eng Struct 76:112–123

    Article  Google Scholar 

  • Park R, Priestley M, Gill WD (1982) Ductility of square-confined concrete columns. J Struct Div 108(4):929–950

    Google Scholar 

  • Rahnama M, Krawinkler H (1993) Effects of soft soil and hysteresis model on seismic demands. John A. Blume Earthquake Engineering Center, Standford

    Google Scholar 

  • Setzler EJ, Sezen H (2008) Model for the lateral behavior of reinforced concrete columns including shear deformations. Earthq Spectra 24(2):493–511

    Article  Google Scholar 

  • Sezen H, Moehle JP (2006) Seismic tests of concrete columns with light transverse reinforcement. ACI Struct J 103(6):842–849

    Google Scholar 

  • Shi QX, Niu DT, Yang GY (2000) Experimental research on hysteretic characteristics of corroded RC members with flexural and compressive axial loads under repeated horizontal loading. Earthq Eng Eng Vib 20(4):44–50 (in Chinese)

    Google Scholar 

  • Vu NS, Li B (2018a) Seismic performance of flexural reinforced concrete columns with corroded reinforcement. ACI Struct J 115(5):1253–1266

    Google Scholar 

  • Vu NS, Li B (2018b) Seismic performance assessment of corroded reinforced concrete short columns. J Struct Eng 144(4):04018018

    Article  Google Scholar 

  • Vu NS, Bo Y, Li B (2016) Prediction of strength and drift capacity of corroded reinforced concrete columns. Constr Build Mater 115:304–318

    Article  Google Scholar 

  • Yang SY, Song XB, Jia HX, Chen X, Liu XL (2016) Experimental research on hysteretic behaviors of corroded reinforced concrete columns with different maximum amounts of corrosion of rebar. Constr Build Mater 121:319–327

    Article  Google Scholar 

  • Zhang C, Zhang DW, Zhao YX, Duan A, Cheng J (2015) Experimental study on seismic behavior of corroded reinforced concrete column wrapped with PET sheet. J Build Struct 36(S2):209–215 (in Chinese)

    Google Scholar 

  • Zhang DW, Zhao Y, Jin W, Ueda T, Nakai H (2017) Shear strengthening of corroded reinforced concrete columns using pet fiber based composties. Eng Struct 153:757–765

    Article  Google Scholar 

Download references

Acknowledgements

The authors acknowledge financial support from the National Key Research and Development Program of China (No. 2016YFC0701100, No. 2016YFC0701400) and the National Natural Science Foundation of China (No. 51525801). The financial support from China Scholarship Council (No. 201706090085) is also gratefully acknowledged. The opinions and conclusions presented in this paper are those of the authors and do not necessarily reflect the views of the sponsoring organizations.

Author information

Authors and Affiliations

  1. Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University, Nanjing, 210096, China

    Ji-Gang Xu, De-Cheng Feng & Gang Wu

  2. Institute of Infrastructure and Environment, School of Energy, Geoscience, Infrastructure and Society, Heriot-Watt University, Edinburgh, EH14 4AS, UK

    Demitrios M. Cotsovos

  3. Institute for Infrastructure and Environment, School of Engineering, The University of Edinburgh, Edinburgh, EH9 3JL, UK

    Yong Lu

Authors
  1. Ji-Gang Xu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. De-Cheng Feng
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Gang Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Demitrios M. Cotsovos
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Yong Lu
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Gang Wu.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Xu, JG., Feng, DC., Wu, G. et al. Analytical modeling of corroded RC columns considering flexure-shear interaction for seismic performance assessment. Bull Earthquake Eng 18, 2165–2190 (2020). https://doi.org/10.1007/s10518-019-00770-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10518-019-00770-6

Keywords

Search

Navigation