Skip to main content
SpringerLink
Log in

Diaphragm effectiveness of precast concrete structures with cladding panels under seismic action

  • Original Research
  • Published:
Bulletin of Earthquake Engineering Aims and scope Submit manuscript

Abstract

The seismic performance of precast frame structures strongly depends on the mechanical devices connecting both structural and non-structural elements. Following recent post-earthquake field observations of unintended seismic interaction of the cladding panels with the frame structure, the seismic design of the cladded system is currently being critically examined by the scientific community. Design solutions involving a controlled cladding–structure interaction have been proposed to address this problem. However, the frame–panel interaction may draw high stresses into the roof diaphragm, as a consequence of the stiffening of the external frames only. This paper presents a parametric study based on linear and non-linear dynamic analyses investigating different levels of interaction among frames, panels, and diaphragm system. The results show how the deck and cladding connections influence the seismic behaviour of the structure. Innovative fastening systems aimed at enhancing the seismic performance of the structure are proposed based on the use of dissipative connection devices inserted into both cladding and deck components.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

  • Babič A, Dolšek M (2016) Seismic fragility functions of industrial precast building classes. Eng Struct 118:357–370

    Article  Google Scholar 

  • Belleri A (2017) Displacement based design for precast concrete frames with not-emulative connections. Eng Struct 141:228–240

    Article  Google Scholar 

  • Belleri A, Torquati M, Riva P (2014) Seismic performance of ductile connections between precast beams and roof elements. Mag Conc Res 66(11):553–562

    Article  Google Scholar 

  • Belleri A, Brunesi E, Nascimbene R, Pagani M, Riva P (2015a) Seismic performance of precast industrial facilities following major earthquakes in the Italian Territory. J Perform Constr Facil 29(5):04014135

    Article  Google Scholar 

  • Belleri A, Torquati M, Riva P, Nascimbene R (2015b) Vulnerability assessment and retrofit solutions of precast industrial structures. Earthq Struct 8(3):801–820

    Article  Google Scholar 

  • Belleri A, Torquati M, Marini A, Riva P (2016) Horizontal cladding panels: in-plane seismic performance in precast concrete buildings. Bull Earthq Eng 14(4):1103–1129

    Article  Google Scholar 

  • Belleri A, Marini A, Riva P, Nascimbene R (2017) Dissipating and re-centring devices for portal-frame precast structures. Eng Struct 150:736–745

    Article  Google Scholar 

  • Belleri A, Cornali F, Passoni C, Marini A, Riva P (2018) Evaluation of out-of-plane seismic performance of column-to-column precast concrete cladding panels in one-storey industrial buildings. Earthq Eng Struct Dyn 47(2):397–417

    Article  Google Scholar 

  • Belletti B, Gasperi A, Spagnoli A (2015) Capacity design-based seismic forces in floor-to-beam connections of precast concrete frames. ASCE J Perform Constr Facil 29(6):04014161

    Article  Google Scholar 

  • Biondini F, Toniolo G (2009) Probabilistic calibration and experimental validation of the seismic design criteria for one-storey concrete frames. J Earthq Eng 13:426–462

    Article  Google Scholar 

  • Biondini F, Toniolo G, Tsionis G (2010) Capacity design and seismic performance of multi-storey precast structures. Eur J Environ Civil Eng 14(1):11–28

    Article  Google Scholar 

  • Biondini F, Titi A, Toniolo G (2012) Pseudodynamic tests and numerical simulations on a full-scale prototype of a multi-storey precast structure. In: 15th world conference on earthquake engineering (15WCEE), Lisbon, Portugal, September 24–28, 2012, Paper No. 1468

  • Biondini F, Dal Lago B, Toniolo G (2013a) Role of wall panel connections on the seismic performance of precast structures. Bull Earthq Eng 11(4):1061–1081

    Article  Google Scholar 

  • Biondini F, Dal Lago B, Toniolo G (2013b) Diaphragm action in precast structures with cladding wall panels. In: 15th Italian congress on earthquake engineering (ANIDIS 2013), June 30–July 4, 2013, Padua

  • Bournas DA, Negro P, Molina FJ (2013a) Pseudodynamic tests on a full-scale 3-storey precast concrete building: behaviour of the mechanical connections and floor diaphragms. Eng Struct 57:609–627

    Article  Google Scholar 

  • Bournas D, Negro P, Taucer F (2013b) Performance of industrial buildings during the Emilia earthquakes in Northern Italy and recommendations for their strengthening. Bull Earthq Eng 12(5):2383–2404

    Article  Google Scholar 

  • Brunesi E, Nascimbene R, Bolognini D, Bellotti D (2015) Experimental investigation of the cyclic response of reinforced precast concrete frames structures. PCI J 2:57–79

    Article  Google Scholar 

  • Buratti N, Minghini F, Ongaretto E, Savoia M, Tullini N (2017) Empirical seismic fragility for the precast RC industrial buildings damaged by the 2012 Emilia (Italy) earthquakes. Earthq Eng Struct Dyn 46(4):2317–2335

    Article  Google Scholar 

  • Casotto C, Silva V, Crowley H, Nascimbene R, Pinho R (2015) Seismic fragility of Italian RC precast industrial structures. Eng Struct 94:122–136

    Article  Google Scholar 

  • Dal Lago B, Ferrara L (2016) Efficiency of mechanical floor connections on the diaphragm action of precast concrete floor/roof decks. In: 14th international symposium on structural engineering, vol 1, Beijing, pp 469–476

  • Dal Lago B, Lamperti Tornaghi M (2018) Sliding channel cladding connections for precast structures subjected to earthquake action. Bull Earthq Eng. https://doi.org/10.1007/s10518-018-0410-0

    Article  Google Scholar 

  • Dal Lago B, Molina FJ (2018) Assessment of a capacity spectrum design approach against cyclic and seismic experiments on full-scale precast RC structures. Earthq Eng Struct Dyn 47(7):1591–1609

    Article  Google Scholar 

  • Dal Lago B, Toniolo G, Lamperti Tornaghi M (2016) Influence of different mechanical column-foundation connection devices on the seismic behaviour of precast structures. Bull Earthq Eng 14(12):3485–3508

    Article  Google Scholar 

  • Dal Lago B, Biondini F, Toniolo G (2017a) Friction-based dissipative devices for precast concrete panels. Eng Struct 147:356–371

    Article  Google Scholar 

  • Dal Lago B, Biondini F, Toniolo G, Lamperti Tornaghi M (2017b) Experimental investigation on the influence of silicone sealant on the seismic behaviour of precast façades. Bull Earthq Eng 15(4):1771–1787

    Article  Google Scholar 

  • Dal Lago B, Muhaxheri M, Ferrara L (2017c) Numerical and experimental analysis of an innovative lightweight precast concrete wall. Eng Struct 137:204–222

    Article  Google Scholar 

  • Dal Lago B, Toniolo G, Felicetti R, Lamperti Tornaghi M (2017d) End support connection of precast roof elements by bolted steel angles. Struct Concr 18(5):755–767

    Article  Google Scholar 

  • Dal Lago B, Biondini F, Toniolo G (2018a) Experimental investigation on steel W-shaped folded plate dissipative connectors for precast cladding panels. J Earthq Eng 22(5):778–800

    Article  Google Scholar 

  • Dal Lago B, Biondini F, Toniolo G (2018b) Experimental tests on multiple-slit devices for precast concrete panels. Eng Struct 167:420–430

    Article  Google Scholar 

  • Dal Lago B, Biondini F, Toniolo G (2018c) Seismic performance of precast concrete structures with energy dissipating cladding panel connection systems. Struct Concr. https://doi.org/10.1002/suco.201700233 (invited paper)

    Article  Google Scholar 

  • Dal Lago B, Negro P, Dal Lago A (2018d) Seismic design and performance of dry-assembled precast structures with adaptable joints. Soil Dyn Earthq Eng 106:182–195

    Article  Google Scholar 

  • Dei Poli S, di Prisco M, Gambarova PG (1992) Shear response, deformations, and subgrade stiffness of a dowel bar embedded in concrete. ACI Struct J 89(6):665–675

    Google Scholar 

  • Demartino C, Vanzi I, Monti G, Sulpizio C (2017) Precast industrial buildings in Southern Europe: loss of support at frictional beam-to-column connections under seismic actions. Bull Earthq Eng 16(1):259–294

    Article  Google Scholar 

  • EN 1998-1:2004 (2004) Eurocode 8: design of structures for earthquake resistance. Part 1: General rules, seismic actions and rules for buildings. European Committee for Standardization, Brussels, Belgium

  • Ercolino M, Bellotti D, Magliulo G, Nascimbene R (2018) Vulnerability analysis of industrial RC precast buildings designed according to modern seismic codes. Eng Struct 158:67–78

    Article  Google Scholar 

  • Ferrara L, Toniolo G (2008) Design approach for diaphragm action of roof decks in precast concrete buildings under earthquake. In: Walraven J, Stoelhorst D (eds) fib Symposium “Taylor made concrete structures”, Amsterdam, pp 963–968

  • Fib (2010) Model code for concrete structures. Fédération Internationale du Béton/International Federation for Structural Concrete, Lausanne

    Google Scholar 

  • Fischinger M, Kramar M, Isakovic T (2008) Cyclic response of slender RC columns typical of precast industrial buildings. Bull Earthq Eng 6:519–534

    Article  Google Scholar 

  • Fleischman RB, Farrow KT (2001) Dynamic response of perimeter lateral-system structures with flexible diaphragms. Earthq Eng Struct Dyn 30(5):745–763

    Article  Google Scholar 

  • Fleischman RB, Farrow KT (2003) Seismic design recommendations for precast concrete diaphragms in long floor span constructions. PCI J 11–12:46–62

    Article  Google Scholar 

  • Fleischman RB, Naito C, Restrepo J, Sause R, Ghosh SK (2005a) Seismic design methodology for precast concrete diaphragms, part 1: design framework. PCI J 50(5):68–83

    Article  Google Scholar 

  • Fleischman RB, Naito C, Restrepo J, Sause R, Ghosh SK, Wan G, Schoettler M, Cao L (2005b) Seismic design methodology for precast concrete diaphragms, part 2: research program. PCI J 50(6):14–31

    Article  Google Scholar 

  • G + D Computing (2010) Using Strand7 (Straus7)—Introduction to the Strand7 finite element analysis system, Ed. 3, Strand7 Pty Limited

  • Kramar M, Isakovic T, Fischinger M (2010) Seismic collapse risk of precast industrial buildings with strong connections. Earthq Eng Struct Dyn 39:847–868

    Google Scholar 

  • Magliulo G, Ercolino M, Manfredi G (2014a) Influence of cladding panels on the first period of one-story precast buildings. Bull Earthq Eng 13(5):1531–1555

    Article  Google Scholar 

  • Magliulo G, Ercolino M, Petrone C, Coppola O, Manfredi G (2014b) Emilia earthquake: the seismic performance of precast RC buildings. Earthq Spectra 30(2):891–912

    Article  Google Scholar 

  • Magliulo G, Ercolino M, Cimmino M, Capozzi V, Manfredi G (2015) Cyclic shear test on a dowel beam-to-column connection of precast buildings. Earthq Struct 9(3):541–562

    Article  Google Scholar 

  • Magliulo G, Cimmino M, Ercolino M, Manfredi G (2017) Cyclic shear tests on RC precast beam-to-column connections retrofitted with a three-hinged steel device. Bull Earthq Eng 15(9):3797–3817

    Article  Google Scholar 

  • Metelli G, Beschi C, Riva P (2011a) Cyclic behaviour of a column-to-foundation joint for concrete precast structures. Eur J Env Civ Eng 15(9):1297–1318

    Article  Google Scholar 

  • Metelli G, Bettini N, Plizzari G (2011b) Experimental and numerical studies on the behaviour of concrete sandwich panels. Eur J Env Civ Eng 15(10):1465–1481

    Article  Google Scholar 

  • Muciaccia G, Di Nunzio G, Consiglio A (2017) Behaviour of mono-stud plates in cracked concrete under shear loading. In: 3rd international symposium on connections between steel and concrete (ConSC 2017), September 27–29, Stuttgart

  • Negro P, Lamperti Tornaghi M (2017) Seismic response of precast structures with vertical cladding panels: the SAFECLADDING experimental campaign. Eng Struct 132:205–228

    Article  Google Scholar 

  • Negro P, Bournas DA, Molina FJ (2013) Pseudodynamic tests on a full-scale 3-storey precast concrete building: global response. Eng Struct 57:594–608

    Article  Google Scholar 

  • Orlando M, Piscitelli LR (2018) Experimental investigation on static and cyclic behaviour of flanged unions for precast reinforced concrete columns. Eur J Env Civ Eng 22(8):927–945

    Article  Google Scholar 

  • Palanci M, Senel SM, Kalkan A (2017) Assessment of one story existing precast industrial buildings in Turkey based on fragility curves. Bull Earthq Eng 15(1):271–289

    Article  Google Scholar 

  • Pollini AV, Buratti N, Mazzotti C (2018) Experimental and numerical behaviour of dissipative devices based on carbon-wrapped steel tubes for the retrofitting of existing precast RC structures. Earthq Eng Struct Dyn 47(5):1270–1290

    Article  Google Scholar 

  • Priestley MJN, Sritharan S, Conley JR, Pampanin S (1999) Preliminary results and conclusions from the PRESSS five-story precast concrete test building. Spec Rep PCI J 44(6):42–67

    Article  Google Scholar 

  • Psycharis IN, Mouzakis HP (2012a) Assessment of the seismic design of precast frames with pinned connections from shaking table tests. Bull Earthq Eng 10(6):1795–1817

    Article  Google Scholar 

  • Psycharis IN, Mouzakis HP (2012b) Shear resistance of pinned connections of precast members to monotonic and cyclic loading. Eng Struct 41:413–427

    Article  Google Scholar 

  • Psycharis IN, Kalyviotis IM, Mouzakis HP (2018) Experimental investigation of the response of precast concrete cladding panels with integrated connections under monotonic and cyclic loading. Eng Struct 159:75–88

    Article  Google Scholar 

  • Saisi A, Toniolo G (1999) Precast RC columns under cyclic loading: an experimental programme oriented to EC8. Stud Res Polit Milano 19:373–414

    Google Scholar 

  • Sargin M, Handa VK (1969) A general formulation for the stress-strain properties of concrete. Solid Mech Div 3:1–27

    Google Scholar 

  • Savoia M, Buratti N, Vincenzi L (2017) Damages and collapses in industrial precast buildings after the 2012 Emilia earthquake. Eng Struct 137:162–180

    Article  Google Scholar 

  • Schoettler MJ, Belleri A, Zhang D, Restrepo JI, Fleischman RB (2009) Preliminary results of the shake-table testing for the development of a diaphragm seismic design methodology. PCI J 54(1):100–124

    Article  Google Scholar 

  • Schultz AE, Tadros MK, Huo XM, Magaña RA (1994) Seismic resistance of vertical joints in precast shear walls. In: 12th FIP Congress, Fédération Internationale de la Précontrainte (International Federation for Prestressing), May 29–June 2, 1994, Washington, DC

  • Scotta R, De Stefani L, Vitaliani R (2015) Passive control of precast building response using cladding panels as dissipative shear walls. Bull Earthq Eng 13:3527–3552

    Article  Google Scholar 

  • Sorace S, Terenzi G (2017) Existing prefab R/C buildings: seismic assessment and supplemental damping-based retrofit. Soil Dyn Earthq Eng 94:193–203

    Article  Google Scholar 

  • Takeda T, Sozen MA, Nielsen NN (1970) Reinforced concrete response to simulated earthquakes. ASCE J Struct Div 96(12):2557–2573

    Google Scholar 

  • Titi A, Biondini F (2014) Probabilistic seismic assessment of multistory precast concrete frames exposed to corrosion. Bull Earthq Eng 12(6):2665–2681

    Article  Google Scholar 

  • Titi A, Biondini F, Toniolo G (2018) Seismic assessment of existing precast structures with dry-friction beam-to-column joints. Bull Earthq Eng 16(5):2067–2086

    Article  Google Scholar 

  • Toniolo G, Colombo A (2012) Precast concrete structures: the lesson learnt from L’Aquila earthquake. Struct Conc 13(2):73–83

    Article  Google Scholar 

  • Toniolo G, Dal Lago B (2017) Conceptual design and full-scale experimentation of cladding panel connection systems of precast buildings. Earthq Eng Struct Dyn 46(14):2565–2586

    Article  Google Scholar 

  • Tsoukantas SG, Tassios TP (1989) Shear resistance of connections between reinforced concrete linear precast elements. ACI Struct J 86(3):242–249

    Google Scholar 

  • Tullini N, Minghini F (2016) Grouted sleeve connections used in precast reinforced concrete construction—experimental investigation of a column-to-column joint. Eng Struct 127:784–803

    Article  Google Scholar 

  • Valente M (2013) Improving the seismic performance of precast buildings using dissipative devices. In: 2nd ICRMCE, vol 54, pp 795–804

  • Vintzeleou EN, Tassios TP (1987) Behavior of dowels under cyclic deformations. ACI Struct J 84(1):18–30

    Google Scholar 

  • Yuksel E, Karadoğan F, Bal E, Ilki A, Bal A, Inci P (2015) Seismic behavior of two exterior beam-column connections made of normal-strength concrete developed for precast construction. Eng Struct 99:157–172

    Article  Google Scholar 

  • Yuksel E, Karadoğan F, Ozkaynak H, Khajehdei A, Güllü A, Smyrou E, Bal IE (2017) Behaviour of steel cushions subjected to combined actions. Bull Earthq Eng 16(2):707–729

    Article  Google Scholar 

  • Zoubek B, Fischinger M, Isakovic T (2015) Estimation of the cyclic capacity of beam-to-column dowel connections in precast industrial buildings. Bull Earthq Eng 13(7):2145–2168

    Article  Google Scholar 

  • Zoubek B, Fischinger M, Isaković T (2016) Cyclic response of hammer-head strap cladding-to-structure connections used in RC precast buildings. Eng Struct 119:135–148

    Article  Google Scholar 

  • Zoubek B, Fischinger M, Isaković T (2018) Seismic response of short restrainers used to protect cladding panels in RC precast buildings. J Vib Control 24(4):645–658

    Article  Google Scholar 

Download references

Acknowledgements

The work presented in this paper has been carried out with the financial support of the Italian Department of Civil Protection (DPC) and the Italian Laboratories University Network of Earthquake Engineering (ReLUIS) within the research program DPC-ReLUIS 2014–2016.

Author information

Authors and Affiliations

  1. Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133, Milan, Italy

    Bruno Dal Lago, Silvia Bianchi & Fabio Biondini

Authors
  1. Bruno Dal Lago
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Silvia Bianchi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Fabio Biondini
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Bruno Dal Lago.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Dal Lago, B., Bianchi, S. & Biondini, F. Diaphragm effectiveness of precast concrete structures with cladding panels under seismic action. Bull Earthquake Eng 17, 473–495 (2019). https://doi.org/10.1007/s10518-018-0452-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10518-018-0452-3

Keywords

Search

Navigation