Skip to main content
SpringerLink
Log in

Experimental and numerical investigation of the seismic response of precast wall connections

Bulletin of Earthquake Engineering volume 15, pages 5511–5550 (2017)Cite this article

Abstract

This paper investigates the seismic response of lightly reinforced precast concrete shear walls typically used for low- to mid-rise residential systems in past and current Dutch building practice. The results of a wide set of pseudostatic cyclic tests performed on full-scale single precast panels with or without openings were examined and discussed, quantifying the sensitivity of structural response and failure mode to changes in axial load and wall geometry. Behavioral aspects of those panels were treated at a global/structural and local/sectional level, posing particular emphasis on their wall-to-foundation and wall-to-wall joints. Asymmetric push–pull tests of precast wall connections were also carried out and presented to characterize the cyclic behavior of this type of joint system under simulated seismic loading. The outcome of this large campaign of experimental tests was then used to develop and validate a simple numerical model to be integrated in a framework for large scale seismic fragility analysis of precast terraced structures built with this particular technology.

This is a preview of subscription content, access via your institution.

Access options

Buy single article

Instant access to the full article PDF.

USD 39.95

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28

References

  • Antoniou S, Pinho R (2004) Development and verification of a displacement-based adaptive pushover procedure. J Earthq Eng 8(5):643–661

    Google Scholar 

  • Belleri A, Riva P (2012) Seismic performance and retrofit of precast grouted sleeve connections. PCI J 57(1):97–109

    Article  Google Scholar 

  • Belleri A, Schoettler MJ, Restrepo JI, Fleischman RB (2014) Dynamic behavior of rocking and hybrid cantilever walls in a precast concrete building. ACI Struct J 111(3):661–671

    Article  Google Scholar 

  • Belleri A, Brunesi E, Nascimbene R, Pagani M, Riva P (2015) Seismic performance of precast industrial facilities following major earthquakes in the Italian territory. J Peform Constr Facil ASCE 29(5):04014135

    Article  Google Scholar 

  • Belleri A, Torquati M, Marini A, Riva P (2016) Horizontal cladding panels: in-plane seismic performance in precast concrete buildings. Bull Earthq Eng 14(4):1103–1129

    Article  Google Scholar 

  • Beyer K, Dazio A, Priestley MJN (2008) Inelastic wide-column models for U-shaped reinforced concrete walls. J Earthq Eng 12(S1):1–33

    Article  Google Scholar 

  • Biondini F, Dal Lago B, Toniolo G (2013) Role of wall panel connections on the seismic performance of precast structures. Bull Earthq Eng 11(4):1061–1081

    Article  Google Scholar 

  • Bommer JJ, Crowley H, Pinho R (2015) A risk-mitigation approach to the management of induced seismicity. J Seismol 19(2):623–646

    Article  Google Scholar 

  • Bournas DA, Negro P, Molina FJ (2013) Pseudodynamic tests on a full-scale 3-storey precast concrete building: behavior of the mechanical connections and floor diaphragms. Eng Struct 2013(57):609–627

    Article  Google Scholar 

  • Brunesi E, Nascimbene R (2014) Extreme response of reinforced concrete buildings through fiber force-based finite element analysis. Eng Struct 69:206–215

    Article  Google Scholar 

  • Brunesi E, Nascimbene R, Bolognini D, Bellotti D (2015a) Experimental investigation of the cyclic response of reinforced precast concrete framed structures. PCI J 60(2):57–79

    Article  Google Scholar 

  • Brunesi E, Nascimbene R, Deyanova M, Pagani C, Zambelli S (2015b) Numerical simulation of hollow steel profiles for lightweight concrete sandwich panels. Comput Concr 15(6):951–972

    Article  Google Scholar 

  • Brunesi E, Nascimbene R, Parisi F, Augenti N (2015c) Progressive collapse fragility of reinforced concrete framed structures through incremental dynamic analysis. Eng Struct 104:65–79

    Article  Google Scholar 

  • Brunesi E, Nascimbene R, Pavese A (2016) Mechanical model for seismic response assessment of lightly reinforced concrete walls. Earthq Struct 11(3):461–481

    Article  Google Scholar 

  • CEN, European Committee for Standardization (2004a) EN 1992-1-1. Eurocode 2 (EC2): design of concrete structures—part 1.1: general rules and rules for buildings. Brussels, Belgium

  • CEN, European Committee for Standardization (2004b) EN 1998-1-5. Eurocode 8 (EC8): design of structures for earthquake resistance—part 1.5: specific rules for concrete buildings. Brussels, Belgium

  • Crisafulli FJ, Restrepo JI, Park R (2002) Seismic design of lightly reinforced precast rectangular wall panels. PCI J 47(4):104–121

    Article  Google Scholar 

  • Crowley H, Pinho R, Bommer JJ (2004) A probabilistic displacement-based vulnerability assessment procedure for earthquake loss estimation. Bull Earthq Eng 2(2):173–219

    Article  Google Scholar 

  • Dal Lago B, Toniolo G, Lamperti Tornaghi M (2016) Influence of different mechanical column-foundation connection devices on the seismic behaviour of precast structures. Bull Earthq Eng 14(12):3485–3508

    Article  Google Scholar 

  • Dal Lago B, Biondini F, Toniolo G (2017a) Experimental investigation on steel W-shaped folded plate dissipative connectors for horizontal precast concrete cladding panels. J Earthq Eng. doi:10.1080/13632469.2016.1264333

    Google Scholar 

  • Dal Lago B, Biondini F, Toniolo G, Lamperti Tornaghi M (2017b) Experimental investigation on the influence of silicone sealant on the seismic behaviour of precast façades. Bull Earthq Eng 15(4):1771–1787

    Article  Google Scholar 

  • Dazio A, Beyer K, Bachmann H (2009) Quasi-static cyclic tests and plastic hinge analysis of RC structural walls. Eng Struct 31:1556–1571

    Article  Google Scholar 

  • De Borst R (1987) Smeared cracking, plasticity, creep and thermal loading—a unified approach. Comp Meth Appl Mech Eng 62(1):89–110

    Article  Google Scholar 

  • Englekirk RE (2003) Seismic design of reinforced and precast concrete buildings. Wiley, New York

    Google Scholar 

  • EOTA, European Organization for Technical Approvals (2010) ETAG 001: guideline for european technical approval of metal anchors for use in concrete—annex C: design methods for anchorages. Brussels, Belgium

  • Fédération Internationale du Béton (fib), Bulletin 43 (2008) Structural connections for precast concrete buildings. Lausanne, Switzerland: fib, federation internationale du béton

  • Fintel M (1995) Performance of buildings with shear walls in earthquakes in the last thirty years. PCI J 4(3):62–80

    Article  Google Scholar 

  • Fischinger M, Kramar M, Isakovic T (2008) Cyclic response of slender RC columns typical of precast industrial buildings. Bull Earthq Eng 6(3):519–534

    Article  Google Scholar 

  • Ghobarah A, Youssef M (1999) Modelling of reinforced concrete structural walls. Eng Struct 21(10):912–923

    Article  Google Scholar 

  • Hidalgo PA, Ledezma CA, Jordan RM (2002) Seismic behavior of squat reinforced concrete shear walls. Earthq Spectra 18(2):287–308

    Article  Google Scholar 

  • Holden T, Restrepo J, Mander JB (2003) Seismic performance of precast reinforced and prestressed concrete walls. J Struct Eng ASCE 129(3):286–296

    Article  Google Scholar 

  • Hung C-C, El-Tawil S (2010) Hybrid rotating/fixed-crack model for high performance fiber reinforced cementitious composites. ACI Mater J 107(6):568–576

    Google Scholar 

  • Kaldjian MJ (1967) Moment-curvature of beams as Ramberg-Osgood functions. J Struct Div ASCE 93(ST5):53–65

    Google Scholar 

  • Kang S-M, Kim O-J, Park H-G (2013) Cyclic loading test for emulative precast concrete walls with partially reduced rebar section. Eng Struct 56:1645–1657

    Article  Google Scholar 

  • Kurama Y, Sause R, Pessiki S, Lu LW (1999) Lateral load behavior and seismic design of unbonded post-tensioned precast concrete walls. ACI Struct J 96(4):622–632

    Google Scholar 

  • Li B, Qian K, Wu H (2016) Flange effects on seismic performance of reinforced concrete squat walls with irregular or regular openings. Eng Struct 110:127–144

    Article  Google Scholar 

  • Magliulo G, Ercolino M, Petrone C, Coppola O, Manfredi G (2014) The Emilia earthquake: seismic performance of precast reinforced concrete buildings. Earthq Spectra 30(2):891–912

    Article  Google Scholar 

  • Magliulo G, Ercolino M, Manfredi G (2015) Influence of the cladding panels on the first period of one-storey precast building. Bull Earthq Eng 13(5):1531–1555

    Article  Google Scholar 

  • Mander JB, Priestley MJN, Park R (1988) Theoretical stress-strain model for confined concrete. J Struct Eng ASCE 114(8):1804–1826

    Article  Google Scholar 

  • Mousavi SA, Zahrai SM, Bahrami-Rad A (2014) Quasi-static cyclic tests on super-lightweight EPS concrete shear walls. Eng Struct 65:62–75

    Article  Google Scholar 

  • Nederlands Normalisatie-instituut (2011) National annex to NEN-EN 1990 + A1 + A1/C2: eurocode: basis of structural design. Delft, the Netherlands

  • Otani S (1981) Hysteresis models of reinforced concrete for earthquake response analysis. J Fac Eng 36(2):407–441

    Google Scholar 

  • Palermo M, Trombetti T (2016) Experimentally-validated modelling of thin RC sandwich walls subjected to seismic loads. Eng Struct 119:95–109

    Article  Google Scholar 

  • Palermo M, Gil-Martín LM, Trombetti T, Hernandez-Montes E (2013) In-plane shear behaviour of thin low reinforced concrete panels for earthquake reconstruction. Mater Struct 46(5):841–856

    Article  Google Scholar 

  • Palermo M, Ricci I, Silvestri S, Gasparini G, Trombetti T, Foti D, Ivorra S (2014) Preliminary interpretation of shaking-table response of a full-scale 3-storey building composed of thin reinforced concrete sandwich walls. Eng Struct 76:75–89

    Article  Google Scholar 

  • Pavese A, Bournas DA (2011) Experimental assessment of the seismic performance of a prefabricated concrete structural wall system. Eng Struct 33:2049–2062

    Article  Google Scholar 

  • Peng Y-Y, Qian J-R, Wang Y-H (2016) Cyclic performance of precast concrete shear walls with a mortar-sleeve connection for longitudinal steel bars. Mater Struct 49(6):2455–2469

    Article  Google Scholar 

  • Priestley MJN, Sritharan SS, Conley JR, Pampanin S (1999) Preliminary results and conclusions from the PRESSS five-story precast concrete test building. PCI J 44(6):42–67

    Article  Google Scholar 

  • Psycharis IN, Mouzakis HP (2012a) Shear resistance of pinned connections of precast members to monotonic and cyclic loading. Eng Struct 41:413–427

    Article  Google Scholar 

  • Psycharis IN, Mouzakis HP (2012b) Assessment of the seismic design of precast frames with pinned connections from shaking table tests. Bull Earthq Eng 10(6):1795–1817

    Article  Google Scholar 

  • Rezaifar O, Kabir MZ, Taribakhsh M, Tehranian A (2008) Dynamic behaviour of 3D panel single-storey system using shaking-table testing. Eng Struct 30:318–337

    Article  Google Scholar 

  • Ricci I, Palermo M, Gasparini G, Silvestri S, Trombetti T (2013) Results of pseudo-static tests with cyclic horizontal load on cast in situ sandwich squat concrete walls. Eng Struct 54:131–149

    Article  Google Scholar 

  • Rodríguez M, Blandón J (2005) Tests on a half-scale two-story seismic-resisting precast concrete building. PCI J 50(1):94–114

    Article  Google Scholar 

  • Rodriguez ME, Restrepo JI, Carr AJ (2002) Earthquake-induced floor horizontal accelerations in buildings. Earthq Eng Struct Dyn 31(3):693–718

    Article  Google Scholar 

  • Salonikios TN, Kappos AJ, Tegos IA, Penelis GG (1999) Cyclic load behavior of low-slenderness R/C walls: design basis and test results. ACI Struct J 96(4):649–660

    Google Scholar 

  • Salonikios TN, Kappos AJ, Tegos IA, Penelis GG (2000) Cyclic load behavior of low-slenderness R/C walls: failure modes, strength and deformation analysis, and design implications. ACI Struct J 97(1):132–141

    Google Scholar 

  • Seismosoft (2016) SeismoStruct—a computer program for static and dynamic nonlinear analysis of framed structures. URL: www.seismosoft.com

  • Silva V, Crowley H, Pinho R, Varum H (2013) Extending displacement-based earthquake loss assessment (DBELA) for the computation of fragility curves. Eng Struct 56:343–356

    Article  Google Scholar 

  • Spacone E, Filippou FC, Taucer FF (1996) Fibre beam-column model for non-linear analysis of RC frames: part I. Formulation. Earthq Eng Struct Dyn 25:711–725

    Article  Google Scholar 

  • Todut C, Dan D, Stoian V (2014) Theoretical and experimental study on precast reinforced concrete wall panels subjected to shear force. Eng Struct 80:323–338

    Article  Google Scholar 

  • Toranzo LA, Restrepo JI, Mander JB, Carr AJ (2009) Shake-table tests of confined-masonry rocking walls with supplementary hysteretic damping. J Earthq Eng 13(6):882–898

    Article  Google Scholar 

  • Tsoukantas SG, Tassios TP (1989) Shear resistance of connections between reinforced concrete linear precast elements. ACI Struct J 86(3):242–249

    Google Scholar 

  • Vintzeleou EN, Tassios TP (1987) Behavior of dowels under cyclic deformations. ACI Struct J 84(1):18–30

    Google Scholar 

  • Wiebe L, Christopoulos C (2010) Characterizing acceleration spikes due to stiffness changes in nonlinear systems. Earthq Eng Struct Dyn 39(14):1653–1670

    Article  Google Scholar 

  • Zoubek B, Fischinger M, Isaković T (2016) Cyclic response of hammer-head strap cladding-to-structure connections used in RC precast building. Eng Struct 119:135–148

    Article  Google Scholar 

Download references

Acknowledgements

This paper describes an activity that is part of the “Numerical and experimental evaluation of the seismic response of precast wall connections” project at Eucentre, undertaken within the framework of the research program for hazard and risk of induced seismicity in Groningen sponsored by the Nederlandse Aardolie Maatschappij BV. The authors would like to thank all the parties involved in this project: DICAr Lab of University of Pavia and Eucentre Lab that performed the test, together with NAM, Arup and TU Delft. Moreover, the authors are deeply indebted to Prof. Alberto Pavese, Dr. Filippo Dacarro and Dr. Simone Peloso for the extensive comments given on this research. Lastly, the authors are sincerely thankful to Dr. Giulia Fagà for the insightful support with figure editing.

Author information

Authors and Affiliations

  1. EUCENTRE, European Centre for Training and Research in Earthquake Engineering, Via Ferrata 1, 27100, Pavia, Italy

    E. Brunesi & R. Nascimbene

Authors
  1. E. Brunesi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. R. Nascimbene
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to R. Nascimbene.

Rights and permissions

Reprints and Permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Brunesi, E., Nascimbene, R. Experimental and numerical investigation of the seismic response of precast wall connections. Bull Earthquake Eng 15, 5511–5550 (2017). https://doi.org/10.1007/s10518-017-0166-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10518-017-0166-y

Keywords

search

Navigation