Abstract
In code-based seismic design and assessment it is often allowed the use of real records as an input for nonlinear dynamic analysis. On the other hand, international seismic guidelines, concerning this issue, have been found hardly applicable by practitioners. This is related to both the difficulty in rationally relating the ground motions to the hazard at the site and the required selection criteria, which do not favor the use of real records, but rather various types of spectrum matching signals. To overcome some of these obstacles a software tool for code-based real records selection was developed. REXEL, freely available at the website of the Italian network of earthquake engineering university labs (http://www.reluis.it/index_eng.html), allows to search for suites of waveforms, currently from the European Strong-motion Database, compatible to reference spectra being either user-defined or automatically generated according to Eurocode 8 and the recently released new Italian seismic code. The selection reflects the provisions of the considered codes and others found to be important by recent research on the topic. In the paper, record selection criteria are briefly reviewed first, and then the algorithms implemented in the software are discussed. Finally, via some examples, it is shown how REXEL can effectively be a contribution to code-based real records selection for seismic structural analysis.
Similar content being viewed by others
References
Akkar S, Bommer JJ (2006) Influence of long-period filter cut-off on elastic spectral displacements. Earthq Eng Struct Dyn 35: 1145–1165
Ambraseys N, Smit P, Berardi R, Rinaldis D, Cotton F, Berge C (2000) Dissemination of European strong-motion data (Cd-Rom collection). European Commission, Dgxii, Science, Research and Development, Bruxelles
Ambraseys NN, Douglas J, Rinaldis D, Berge-Thierry C, Suhadolc P, Costa G, Sigbjornsson R, Smit P (2004) Dissemination of European strong-motion data, vol 2, Cd-Rom Collection. Engineering and Physical Sciences Research Council, United Kingdom
Beyer K, Bommer JJ (2007) Selection and scaling of real accelerograms for bi-directional loading: a review of current practice and code provisions. J Earthq Eng 11(S1): 13–45
CEN, European Committee for Standardisation (2003) Eurocode 8: design provisions for earthquake resistance of structures, Part 1.1: general rules, seismic actions and rules for buildings, prEN 1998-1
CEN, European Committee for Standardisation (2005) Eurocode 8: design of structures for earthquake resistance. Part 2: bridges, prEN 1998-2
Convertito V, Iervolino I, Herrero A (2009) The importance of mapping the design earthquake: insights for southern Italy. Bull Seismol Soc Am 99(5) (in press)
Cornell CA (2004) Hazard, ground-motions and probabilistic assessment for PBSD. In: Fajfar P, Krawinkler H (eds) Performance based seismic design concepts and implementation, PEER report 2004/05. Pacific Earthquake Engineering Research Center University of California, Berkeley, CA, USA
CS.LL.PP. (2008) DM 14 Gennaio, Norme tecniche per le costruzioni. Gazzetta Ufficiale della Repubblica Italiana 29 (in Italian)
CS.LL.PP. (2009) Istruzioni per l’applicazione delle norme tecniche delle costruzioni. Gazzetta Ufficiale della Repubblica Italiana 47 (in Italian)
Iervolino I, Cornell CA (2005) Record selection for nonlinear seismic analysis of structures. Earthq Spectra 21(3): 685–713
Iervolino I, Manfredi G (2008) Review of ground motion record selection strategies for dynamic structural analysis. In: Bursi OS, Wagg DJ (eds) Modern testing techniques of mechanical and structural systems. CISM Courses and Lectures Number 502. Springer, Wien, New York
Iervolino I, Galasso C (2009) REXEL 2.31 beta—tutorial, available at: http://www.reluis.it/doc/software/REXEL_Tutorial_ENG.pdf
Iervolino I, Maddaloni G, Cosenza E (2008) Eurocode 8 compliant real record sets for seismic analysis of structures. J Earthq Eng 12(1): 54–90
Iervolino I, Maddaloni G, Cosenza E (2009) A note on selection of time-histories for seismic analysis of bridges in Eurocode 8. J Earthq Eng 13 (in press)
Montaldo V, Meletti C, Martinelli F, Stucchi M, Locati M (2007) On-line seismic hazard data for the new italian building code. J Earthq Eng 11(S1): 119–132
Naeim F, Alimoradi A, Pezeshk S (2004) Selection and scaling of ground-motion time histories for structural design using genetic algorithms. Earthq Spectra 20(2): 413–426
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Iervolino, I., Galasso, C. & Cosenza, E. REXEL: computer aided record selection for code-based seismic structural analysis. Bull Earthquake Eng 8, 339–362 (2010). https://doi.org/10.1007/s10518-009-9146-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10518-009-9146-1