The results of mathematical modeling performed to make an assessment of the strength, the normal operation, and the resource of the critical element of the load-transfer machine. Good convergence obtains with measurements of the deflection of the central part of the chain on a real structure. The results of the modeling are used in designing a chain-type cable layer whose purpose is to bring electric cables to mobile equipment. It is shown that the considered design meets the requirements of strength under static and dynamic loading. The resource characteristics are substantiated for a specified number of loading cycles.
Similar content being viewed by others
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Atomnaya Énergiya, Vol. 133, No. 1, pp. 55–57, July, 2022.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Vilenskii, O.Y., Dushev, S.A., Ermakov, A.V. et al. Mathematical Modeling in Designing a Chain-Type Cable-Laying Machine for NPP Equipment. At Energy 133, 59–62 (2022). https://doi.org/10.1007/s10512-023-00973-w
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10512-023-00973-w