Skip to main content
Log in

Electron Microscopy of Barrier Coatings on Uranium-Molybdenum Fuel Irradiated to Burnup 60%

  • Published:
Atomic Energy Aims and scope

Two directions of modification for increasing the stability of dispersion fuel U–Mo/Al under reactor conditions are examined. The first direction is to introduce Zr, Ti, and Si into the fuel alloy and Si, Mg into the aluminum matrix. The second direction is to create barrier coatings on the surface of fuel particles. Reactor tests of mini-fuel-elements with barrier coatings comprised of Nb, the alloy Zr–1%Nb, and UO2 around the fuel particles were performed in the IVV-2M reactor. These tests showed a positive effect on the reduction of the swelling of mini-fuel-elements and growth rate of the (U, Mo)Alx layer. The results of electron-microscopy and the distributions of U, Mo, Zr, Nb, Si, Al, Xe, Kr, and Nd in the components of the fuel compositions U–Mo/Al and U–Mo/Al–12%Si with barrier coatings comprised of niobium and the alloy Zr–1%Nb and UO2 around fuel particles and without coatings irradiated to burnup 60% are presented.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. J. Park, H. Ryu, S. Oh, et al., “Interdiffusion behavior of U–Mo–Zr/Al–Si,” in: Proc. RERTR-2006, Republic of South Africa, Oct. 29 – Nov. 2, 2006, www.rertr.anl.gov/RERTR28/PDF/S11-5_Park.pdf.

  2. M. Meyer, R. Ambrosek, and G. Chang, Progress in the US RERTR Fuel Development Program, ibid.

  3. G. Hofman, Y. Kim, A. Robinson, et al., “Post-irradiation analysis of RERTR-7A, 7B and RERTR-9 test,” in: Proc. RERTR-2007, Czech Republic, Sept. 23–27, 2007, www.rertr.anl.gov/RERTR29/PDF/15-1_Hofman.pdf.

  4. J. Park, H. Ryu, J. Park, et al., “Phase stability of U–Mo–Ti alloys and interdiffusion behaviour of U–Mo–Ti/Al– Si,” ibid., www.rertr.anl.gov/RERTR29/PDF/15-3_Park.pdf.

  5. Y. Kim, G. Hofman G., H. Ryu, et al., Thermodynamic and metallurgical considerations to stabilizing the interaction layers of U–Mo/Al dispersion fuel,” in: Proc. RERTR-2005, US, Nov. 6–10, 2005, www.rertr.anl.gov/RERTR27/PDF/S14-3_Kim.pdf.

  6. C. Kim. K. Kim, J. Park, et al., “Progress of KOMO-3 irradiation test for various U–Mo dispersion and monolithic fuel to overcome interaction problem in U–Mo/Al dispersion fuel,” ibid., www.rertr.anl.gov/RERTR27/PDF/S6-3_Kim.pdf.

  7. G. Hofman, Y. Kim, H. Ryu, et al., “Results of low-enriched U–Mo dispersion fuel miniplates from irradiation test, RERTR-6,” in: Proc. RERTR-2006, Republic of South Africa, Oct. 29 – Nov. 2, 2006, www.rertr.anl.gov/RERTR28/PDF/S11-2_Hofman.pdf.

  8. Y. S. Kim, H. Ryu, G. Hofman, et al., “Interaction layer growth correlation for (U–Mo)/Al and Si-added (U– Mo)/Al dispersion fuels,” ibid., www.rertr.anl.gov/RERTR28/PDF/S15-1_Kim.pdf.

  9. Y. Kim, G. Hofman, P. Medvedev, et al., “Post irradiation analysis and performance modeling of dispersion and monolithic U–Mo fuels,” in: Proc. RERTR-2007, Czech Republic, Sept. 23–27, 2007, www.rertr.anl.gov/RERTR29/PDF/13-3_Kim.pdf.

  10. M. Mirandou, “Out of pile diffusion studies between U–7wt%Mo and Al–Si alloys,” in: Proc. RERTR-2005, US, Nov. 6–10, 2005, www.rertr.anl.gov/RERTR27/PDF/S13-2_Mirandou.pdf.

  11. G. A. Birzhevoi, A. D. Karpin, V. V. Popov, and V. N. Sugonyaev, “Some approaches to solving the problem of diminishing the interaction between U–Mo fuel particles and Al matrix,” in: Trans. Int. Conf. Research Reactor Fuel Management RRFM-2006, Bulgaria, April 30 – May 3, 2006, pp. 79–82.

  12. F. Mazaudier, C. Proye, J. Miragaya, et al., “Thermodynamic and kinetic features of the oxidation treatment of U7Mo particles,” in: Proc. RERTR-2006, Republic of South Africa, Oct. 29 – Nov. 2, 2006.

  13. S. Dubois, F. Mazaudier, H. Palancher, et al., “Development of dispersion UMo fuel: an oxide layer as a protective barrier of the UMo particles,” ibid., www.rertr.anl.gov/RERTR28/PDF/S6-3_Dubois.pdf.

  14. G. Hofman, Y. Kim, H. Ryu, et al., “Improved irradiation behaviour of uranium-molybdenum/aluminum dispersion fuel,” in: Trans. Int. Conf. Research Reactor Fuel Management RRFM-2007, France, March 11–13, 2007, pp. 39–45.

  15. A. M. Savchenko, I. I. Konovalov, E. K. Malamanova, et al., “Novel trends in fuel and matrix alloying to reduce interaction,” ibid., pp. 58–63.

  16. E. Pasqualini, “Dispersed (coating particles) and monolithic (zircalloy-4 cladding) UMo miniplates,” in: Proc. RERTR-2005, US, Nov. 6–10, 2005, www.rertr.anl.gov/RERTR27/PDF/S15-3_Pasqualini.pdf.

  17. G. A. Birzhevoi, V. V. Popov, O. A. Golosov, et al., “Results of post-irradiation examination of the (U–Mo)–Aluminum matrix interaction rate,” in: Trans. Int. Conf. Research Reactor Fuel Management RRFM-2007, France, March 11–13, 2007, pp. 468–472.

Download references

Author information

Authors and Affiliations

Authors

Additional information

V. V. Popov is deceased.

Translated from Atomnaya Energiya, Vol. 121, No. 4, pp. 213–219, October, 2016.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Golosov, O.A., Averin, S.A., Lyutikova, M.S. et al. Electron Microscopy of Barrier Coatings on Uranium-Molybdenum Fuel Irradiated to Burnup 60%. At Energy 121, 276–282 (2017). https://doi.org/10.1007/s10512-017-0197-0

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10512-017-0197-0

Navigation