Abstract
As thermal protection substrates for wearable electronics, functional soft composites made of polymer materials embedded with phase change materials and metal layers demonstrate unique capabilities for the thermal protection of human skin. Here, we develop an analytical transient phase change heat transfer model to investigate the thermal performance of a wearable electronic device with a thermal protection substrate. The model is validated by experiments and the finite element analysis (FEA). The effects of the substrate structure size and heat source power input on the temperature management efficiency are investigated systematically and comprehensively. The results show that the objective of thermal management for wearable electronics is achieved by the following thermal protection mechanism. The metal thin film helps to dissipate heat along the in-plane direction by reconfiguring the direction of heat flow, while the phase change material assimilates excessive heat. These results will not only promote the fundamental understanding of the thermal properties of wearable electronics incorporating thermal protection substrates, but also facilitate the rational design of thermal protection substrates for wearable electronics.
Article PDF
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Avoid common mistakes on your manuscript.
References
SONG, J. Mechanics of stretchable electronics. Current Opinion in Solid State & Materials Science, 19(3), 160–170 (2015)
CHENG, X. and ZHANG, Y. H. Micro/nanoscale 3D assembly by rolling, folding, curving, and buckling approaches. Advanced Materials, 31(36), 1901895.1–1901895.27 (2019)
CAI, M., NIE, S., DU, Y., WANG, C., and SONG, J. Soft elastomers with programmable stiffness as strain-isolating substrates for stretchable electronics. ACS Applied Materials & Interfaces, 11, 14340–14346 (2019)
SONG, J., FENG, X., and HUANG, Y. Mechanics and thermal management of stretchable inorganic electronics. National Science Review, 3, 128–143 (2015)
LINGHU, C., ZHANG, S., WANG, C., YU, K., LI, C., ZENG, Y., ZHU, H., JIN, X., YOU, Z., and SONG, J. Universal SMP gripper with massive and selective capabilities for multi-scaled, arbitrarily shaped objects. Science Advances, 6(7), eaay5120 (2020)
HUANG, Y. A., WU, H., XIAO, L., DUAN, Y., ZHU, H., BIAN, J., YE, D., and YIN, Z. Assembly and applications of 3D conformal electronics on curvilinear surfaces. Materials Horizons, 6, 642–683 (2019)
LINGHU, C., WANG, C., CEN, N., WU, J., LAI, Z., and SONG, J. Rapidly tunable and highly reversible bio-inspired dry adhesion for transfer printing in air and a vacuum. Soft Matter, 15(1), 30–37 (2019)
ZHANG, X., LINGHU, C., and SONG, J. Three-dimensional mechanical modeling of magnet-controlled transfer printing. International Journal of Applied Mechanics, 11(2), 1950042 (2019)
MA, Y., ZHANG, Y., CAI, S., HAN, Z., LIU, X., WANG, F., CAO, Y., WANG, Z., LI, H., CHEN, Y., and FENG, X. Flexible hybrid electronics for digital healthcare. Advanced Materials, 32(15), 1902062 (2019)
ZOU, Z. N., ZHU, C. P., LI, Y., LEI, F. X., ZHANG, W., and XIAO, J. L. Rehealable, fully recyclable, and malleable electronic skin enabled by dynamic covalent thermoset nanocomposite. Science Advances, 4(2), eaaq0508 (2018)
YAMAMOTO, Y., HARADA, S., YAMAMOTO, D., HONDA, W., ARIE, T., AKITA, S., and TAKEI, K. Printed multifunctional flexible device with an integrated motion sensor for health care monitoring. Science Advances, 2(11), e1601473 (2016)
HAN, S., KIM, M. K., WANG, B., WIE, D. S., WANG, S. D., and LEE, C. H. Mechanically reinforced skin-electronics with networked nanocomposite elastomer. Advanced Materials, 28(46), 10257–10265 (2016)
WEBB, R. C., MA, Y., KRISHNAN, S., LI, Y., YOON, S., GUO, X., FENG, X., SHI, Y., SEIDEL, M., CHO, N. H., KURNIAWAN, J., AHAD, J., SHETH, N., KIM, J., TAYLOR, VI J. G., DARLINGTONN, T., CHANG, K., HUANG, W., AYERS, J., GRUEBELE, A., PIELAK, R. M., SLEPIAN, M. J., HUANG, Y., GORBACH, A. M., and ROGERS, J. A. Epidermal devices for noninvasive, precise, and continuous mapping of macrovascular and microvascular blood flow. Science Advances, 1(9), e1500701 (2015)
CHIANG, P. Y., CHAO, C. P., TARNG, D. C., and YANG, C. Y. A novel wireless photoplethysmography blood-flow volume sensor for assessing arteriovenous fistula of hemodialysis patients. IEEE Transactions on Industrial Electronics, 64(12), 9626–9635 (2017)
LI, H., XU, Y., LI, X., CHEN, Y., JIANG, Y., ZHANG, C., LU, B., WANG, J., MA, Y., CHEN, Y., HUANG, Y., DING, M., SU, H., SONG, G., LUO, Y., and FENG, X., Epidermal inorganic optoelectronics for blood oxygen measurement. Advanced Healthcare Materials, 6, 1601013 (2017)
LIU, Y., WANG, H., ZHAN, W., ZHANG, M., QIN, H., and XIE, Y. Flexible, stretchable sensors for wearable health monitoring: sensing mechanisms, materials, fabrication strategies and features. Sensors, 18(2), 645 (2018)
PARK, S., FUKUDA, K., WANG, M., LEE, C., YOKOTA, T., JIN, H., JINNO, H., KIMURA, H., ZALAR, P., MATSUHISA, N., UMEZU, S., BAZAN, G. C., and SOMEYA, T. Ultraflexible near-infrared organic photodetectors for conformal photoplethysmogram sensors. Advanced Materials, 30(34), 1802359.1–1802359.8 (2018)
YUAN, J. H., SHI, Y., PHARR, M., FENG, X., ROGERS, J. A., and HUANG, Y. A mechanics model for sensors imperfectly bonded to the skin for determination of the Young’s moduli of epidermis and dermis. Journal of Applied Mechanics, 83(8), 0845011–845013 (2016)
PARK, B., KIM, J., KANG, D., JEONG, C., KIM, K. S., KIM, J. U., YOO, P. J., and KIM, T. I. Dramatically enhanced mechanosensitivity and signal-to-noise ratio of nanoscale crack-based sensors: effect of crack depth. Advanced Materials, 28, 8130–8137 (2016)
CHEN, Y., LU, S., ZHANG, S., LI, Y., QU, Z., CHEN, Y., LU, B., WANG, X., and FENG, X. Skin-like biosensor system via electrochemical channels for noninvasive blood glucose monitoring. Science Advances, 3(12), e1701629 (2017)
LEE, H., SONG, C., HONG, Y. S., KIM, M. S., CHO, H. R., KANG, T., SHIN, K., CHOI, S. H., HYEON, T., and KIM, D. H. Wearable/disposable sweat-based glucose monitoring device with multistage transdermal drug delivery module. Science Advances, 3(3), e1601314 (2017)
YAN, Z. C., PAN, T. S., XUE, M. M., CHEN, C. Y., CUI, Y., YAO, T., HUANG, L., LIAO, F. Y., JING, W., ZHANG, H. L., GAO, M., GUO, D. Q., XIA, T., and LIN, Y. Thermal release transfer printing for stretchable conformal bioelectronics. Advanced Science, 4(11), 1700251 (2017)
ZHANG, S., WANG, C., GAO, H., YU, C., YAN, Q., LU, Y., TAO, Z., LINGHU, C., CHEN, Z., XU, K., and SONG, J. A removable insertion shuttle for ultraflexible neural probe implantation with stable chronic brain electrophysiological recording. Advanced Materials Interfaces, 7(6), 1901775 (2020)
KIM, D. H., LU, N. S., MA, R., KIM, Y. S., KIM, R. H., WANG, S. D., WU, J., WON, S. M., TAO, H., ISLAM, A., YU, K. J., KIM, T. I., CHOWDHURY, R., YING, M., XU, L. Z., LI, M., CHUNG, H. J., KEUM, H., MCCORMICK, M., LIU, P., ZHANG, Y. W., OMENETTO, F. G., HUANG, Y., COLEMAN, T., and ROGERS, J. A. Epidermal electronics. Science, 333, 838–843 (2011)
JEONG, S. H., CHEN, S., HUO, J., GAMSTEDT, E. K., LIU, J., ZHANG, S. L., ZHANG, Z. B., HJORT, K., and WU, Z. Mechanically stretchable and electrically insulating thermal elastomer composite by liquid alloy droplet embedment. Scientific Reports, 5, 18257 (2015)
ZENG, X. L., SUN, J. J., YAO, Y. M., SUN, R., XU, J. B., and WONG, C. P. A combination of boron nitride nanotubes and cellulose nanofibers for the preparation of a nanocomposite with high thermal conductivity. ACS Nano, 11, 5167–5178 (2017)
LI, Y., CHEN, J., XING, Y., and SONG, J. Thermal management of micro-scale inorganic light-emittng diodes on an orthotropic substrate for biointegrated applications. Scientific Reports, 7(1), 6638 (2017)
JUNG, H. H., SONG, J., NIE, S., JUNG, H. N., KIM, M. S., JEONG, J. W., SONG, Y. M., SONG, J., and JANG, K. I. Thin metallic heat sink for interfacial thermal management in biointegrated optoelectronic devices. Advanced Materials Technologies, 23, 1800159 (2018)
SHI, Y. L., HU, M., XING, Y. F., and LI, Y. H. Temperature-dependent thermal and mechanical properties of flexible functional PDMS/paraffin composites. Materials & Design, 185, 108219 (2020)
SHI, Y. L., WANG, C. J., YIN, Y. F., LI, Y. H., XING, Y. F., and SONG, J. Z. Functional soft composites as thermal protecting substrates for wearable electronics. Advanced Functional Materials, 129(45), 1905470 (2019)
VOLLER, V. R. Fast implicit finite-difference method for the analysis of phase change problems. Numerical Heat Transfer Part B, 17, 155–169 (1990)
CARSLAW, H. and JAEGER, J. Heat in Solids, Clarendon Press, Oxford (1959)
SHEN, X. Y., JIANG, C. R., LI, Y., and HUANG, J. P. Thermal metamaterial for convergent transfer of conductive heat with high efficiency. Applied Physics Letters, 109(20), 201906.1–201906.5 (2016)
MARK, J. E. Polymer Data Handbook, Oxford University Press, New York (1999)
ISMAIL, K. A. R., ALVES, C. L. F., and MODESTO, M. S., Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder. Applied Thermal Engineering, 21, 53–77 (2001)
FARID, M. M., KHUDHAIR, A. M., RAZACK, S. A. K., and AL-HALLAJ, S. A review on phase change energy storage: materials and applications. Energy Conversion & Management, 45(9–10), 1597–1615 (2004)
AGYENIM, F., HEWITT, N., EAMES, P., and SMYTH, M. A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS). Renewable and Sustainable Energy Reviews, 14(14), 615–628 (2010)
CABEZA, L. F., CASTELL, A., BARRENECHE, C., GRACIA, A. D., and FERNANDEZ, A. I. Materials used as PCM in thermal energy storage in buildings: a review. Renewable and Sustainable Energy Reviews, 15(3), 1675–1695 (2011)
XU, F., LU, T. J., and SEFFEN, K. A. Biothermomechanics of skin tissues. Journal of the Mechanics & Physics of Solids, 56(5), 1852–1884 (2008)
Author information
Authors and Affiliations
Corresponding author
Additional information
Citation: SHI, Y. L., JI, J. Y., YIN, Y. F., LI, Y. H., and XING, Y. F. Analytical transient phase change heat transfer model of wearable electronics with a thermal protection substrate. Applied Mathematics and Mechanics (English Edition), 41(11), 1599–1610 (2020) https://doi.org/10.1007/s10483-020-2671-7
Project supported by the National Natural Science Foundation of China (No. 11772030), the Aeronautical Science Foundation of China (No. 2018ZC51030), and the Opening fund of State Key Laboratory of Structural Analysis for Industrial Equipment of Dalian University of Technology (No. GZ19117)
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Shi, Y., Ji, J., Yin, Y. et al. Analytical transient phase change heat transfer model of wearable electronics with a thermal protection substrate. Appl. Math. Mech.-Engl. Ed. 41, 1599–1610 (2020). https://doi.org/10.1007/s10483-020-2671-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10483-020-2671-7