Analog Integrated Circuits and Signal Processing

, Volume 74, Issue 2, pp 377–385 | Cite as

Transient analysis of bang–bang phase locked loops for phase step inputs

Article
  • 164 Downloads

Abstract

Regarding to the nonlinear nature of the bang–bang phase-locked loops (BBPLLs), its transient analysis is very complicated. In this paper, new equations are proposed, expressing transient behavior of the BBPLLs with first order filter in response to phase step input. This approach gives new insights into the transient behavior of the BBPLLs. Approximating transient response by a reasonable specific waveform; the loop transient time characteristics such as locking time, peak time, rise time and over shoot are derived with acceptable accuracy. The validity of the resulted equations is verified through simulations using MATLAB SIMULINK. Simulation results show the high accuracy of the proposed equations for BBPLLs transient behavior.

Keywords

Bang–bang PLL Nonlinear operation Transient analysis CDR system 

References

  1. 1.
    Alexander, J. D. H. (1975). Clock recovery from random binary data. Electron Lett, 11, 541–542.CrossRefGoogle Scholar
  2. 2.
    Walker, R. C. (2003). Designing bang–bang PLLs clock and data recovery in serial data transmission systems. In B. Razavi (Ed.), Phase locking in high-performance systems. Piscataway: IEEE Press.Google Scholar
  3. 3.
    Savoj, J., & Razavi, B. (2003). A 10-Gb/s CMOS clock-and-data recovery circuit with a half-rate binary phase/frequency detector. IEEE J Solid-State Circuits, 38(1), 13–21.CrossRefGoogle Scholar
  4. 4.
    Lee, J., Kundert, K., & Razavi, B. (2004). Analysis and modeling of bang–bang clock and data recovery circuits. IEEE J Solid-State Circuits, 39(9), 1571–1580.CrossRefGoogle Scholar
  5. 5.
    Razavi, S.-B. (2001). High speed CMOS circuits for optical receivers. Boston: Kluwer Publishers.Google Scholar
  6. 6.
    Cheng, S., Tong, H., Silva-Martinez, J., & IlkerKarsılayan, A. (2007). Steady-state analysis of phase-locked loops using binary phase detector. Trans Circuits Syst Express Br., 54(6), 1–8.CrossRefGoogle Scholar
  7. 7.
    Da Dalt, N., Thaller, E., Gregorius, P., & Gazsi, L. (2005). A compact triple-band low-jitter digital LC PLL with programmable coil in 130-nm CMOS. IEEE J Solid-State Circuits, 40(7), 1482–1490.CrossRefGoogle Scholar
  8. 8.
    Da Dalt, N. (2006). Markov chains-based derivation of the phase detector gain in bang–bang PLLs. IEEE Trans Circuits Syst II Express Br, 53(11), 1195–1199.CrossRefGoogle Scholar
  9. 9.
    Hanumolu, P., Casper, B., Mooney, R., Wei, G., & Moon, U. (2003). Analysis of PLL clock jitter in high-speed serial links. IEEE Trans Circuits Syst II Express Br, 50(11), 879–886.CrossRefGoogle Scholar
  10. 10.
    Cessna, J. R., & Levy, D. M. (1972). Phase noise and transient times for a binary quantized digital phase-locked loop in white Gaussian noise. IEEE Trans Commun, 20(2), 94–104.CrossRefGoogle Scholar
  11. 11.
    Choi, Y., Jeong, D.-K., & Kim, W. (2003). Jitter transfer analysis of tracked oversampling techniques for multigigabit clock and data recovery. IEEE Trans Circuits Syst II Analog Digit Signal Process., 50(11), 775.CrossRefGoogle Scholar
  12. 12.
    Chan, M., & Postula, A. (2009). Transient analysis of bang–bang phase locked loops. IET Circuits Devices Systems, 3(2), 76. doi:10.1049/iet-cds.2008.0119.CrossRefGoogle Scholar
  13. 13.
    Chan, M., Postula, A., & Ding, Y. (2006). A bang–bang PLL employing dynamic gain control for low jitter and fast lock times. Analog Integr Circuits Signal Process., 49, 131–140.MATHCrossRefGoogle Scholar
  14. 14.
    Ogata, K. (1995). Modern control engineering (3rd ed.). Prentice Hall: Englewood Cliffs.Google Scholar
  15. 15.
    Musa, F. A., & Carusone, A. C. (2007). Modeling and design of multilevel bang–bang CDRs in the presence of ISI and noise. IEEE Trans I, 54(10), 2137–2147.Google Scholar

Copyright information

© Springer Science+Business Media New York 2012

Authors and Affiliations

  1. 1.Babol University of TechnologyBabolIran

Personalised recommendations