Skip to main content
Log in

Kinetics based study on sorption properties of titanium dioxide concerning 99Mo production using sulfate-based aqueous targets

  • Published:
Adsorption Aims and scope Submit manuscript

Abstract

Solutions of uranium salts can be used as targets for the production of medical radionuclides to exclude the most troublesome stages of solid target processing and make the targets reusable. An industrial introduction of this technology for the production of 99Mo requires further development of the technological process of molybdenum extraction using a stable selective sorbent, such as titanium dioxide. Solutions of uranium sulfate in sulfuric acid have proven themselves well at the stage of irradiation, but the adsorption behavior of molybdenum in this media has not been studied sufficiently. A negative effect of the background concentration of the sulfate ion on the efficiency of extraction is shown in this paper, and a kinetic analysis is carried out using Morris-Weber model of intraparticle diffusion. Experiments show that the sorption kinetics can be both positively and negatively affected by an increase in pH from 1.3 to 2.0 when using sorbents of similar composition. The proposed explanation considers the nature of functional groups existing on the surface of the sorbent to be a determining parameter. The negative Y-intercept of the kinetic plot is considered to be a result of relatively slow activation of adsorption centers by protonation. Based on these assumptions, the possibility of existence of active centers with high activation rate, strongly affected by pH, and active centers with low activation rate, less affected by pH, on titanium dioxide surface was postulated.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

Data availability

Not applicable.

References 

  1. An, B.: Cu(II) and As(V) Adsorption kinetic characteristic of the multifunctional amino groups in chitosan. Processes 8, 194–1209 (2020). https://doi.org/10.3390/pr8091194

    Article  CAS  Google Scholar 

  2. Annadurai, G., Juang, R.S., Yen, P.S., Lee, D.J.: Use of thermally treated waste biological sludge as dye absorbent. Adv. Environ. Res. 7, 739–744 (2003). https://doi.org/10.1016/S1093-0191(02)00044-8

    Article  CAS  Google Scholar 

  3. Betenekov, N.D., Denisov, E.I., Sharygin, L.M.: Influence of molybdenum speciation on its recovery with hydroxide sorbents. Radiochemistry 58(1), 63–71 (2016). https://doi.org/10.1134/S1066362216010100

    Article  CAS  Google Scholar 

  4. Boldyrev, P.P., Golubev, V.S., Myasnikov, S.V., Pavlov, A.K., Petrunin, N.V., Pavshook, V.A., Garner, P.L., Lell, R.M., Tentner, A.M., Hanan, N.A.: The Russian ARGUS Solution Reactor HEU-LEU Conversion: LEU Fuel Preparation, Loading and First Criticality. RERTR 2014 ― 35th International Meeting On Reduced Enrichment for Research And Test Reactors. IAEA Vienna International Center 8 (2014).

  5. Brandani, S.: Kinetics of liquid phase batch adsorption experiments. Adsorption 27, 353–368 (2021). https://doi.org/10.1007/s10450-020-00258-9

    Article  CAS  Google Scholar 

  6. Campos, N.F., Barbosa, C., Rodrıguez-Dıaz, J.M., Duarte, M.: Removal of naphthenic acids using activated charcoal: Kinetic and equilibrium studies. Adsorpt. Sci. Technol. 36(7–8), 1405–1421 (2018). https://doi.org/10.1177/0263617418773844

    Article  CAS  Google Scholar 

  7. Denisov, E.I., Betenekov, N.D.: Choice of the optimum composition of the solution fuel for a homogeneous reactor and of Termoxid sorbent for recovering 99Mo. Radiochemistry 60(5), 541–547 (2018). https://doi.org/10.1134/S1066362218050119

    Article  CAS  Google Scholar 

  8. Denisov, E.I., Betenekov, N.D.: Kinetics of 99Mo sorption onto a sorbent based on hydrated titanium dioxide. Radiochemistry 58(6), 631–639 (2016). https://doi.org/10.1134/S1066362216060102

    Article  CAS  Google Scholar 

  9. Denisov, E.I., Betenekov, N.D.: Sorption of molybdenum onto titanium hydroxide. Radiochemistry 60(4), 386–394 (2018). https://doi.org/10.1134/S1066362218040070

    Article  CAS  Google Scholar 

  10. Dittrich S. History and actual state of non-HEU fission-based Mo-99 production with low-performance research reactors. Sci. Technol. Nucl. Install. 1–9 (2013). https://doi.org/10.1155/2013/514894

  11. Glenn, D.E., Heger, A.S., Ball, R.M.: Production of molybdenum-99 using solution reactors. Trans. Am. Nucl. Soc. 74, 138–139 (1996)

    Google Scholar 

  12. Janos, P., Michalek, P., Turek, L.: Sorption of ionic dyes onto untreated low-rank coal - oxihumolite: A kinetic study. Dyes. Pigm. 74, 363–370 (2007). https://doi.org/10.1016/j.dyepig.2006.02.017

    Article  CAS  Google Scholar 

  13. Kotabewatta, P.A., Lim, L.B.L., Priyantha, N.: Biosorption of Cr(III) and Pb(II) from synthetic wastewater under dynamic conditions – diffusion characteristics. Ceylon. J. Sci. 52(1), 71–81 (2023). https://doi.org/10.4038/cjs.v52i1.8106

    Article  Google Scholar 

  14. McKay, G., Otterburn, M.S., Sweeney, A., G,: The removal of colour from effluent using various adsorbents – III Silica: rate processes. Water Res. 14, 15–20 (1980). https://doi.org/10.1016/0043-1354(80)90037-8

    Article  CAS  Google Scholar 

  15. McKay, G., Poots, V.J.P.: Kinetics and Diffusion Processes in Colour Removal from Effluent Using Wood as an Adsorbent. J. Chem. Tech. Biotechnol. 30, 279–292 (1980). https://doi.org/10.1002/jctb.503300134

    Article  CAS  Google Scholar 

  16. Memon, S.Q., Bhanger, M.I., Hasany, S.M., Khuhawar, M.Y.: Sorption behavior of impregnated Styrofoam for the removal of Cd(II) ions. Colloids Surf A Physicochem Eng Asp 279, 142–148 (2006). https://doi.org/10.1016/j.colsurfa.2005.12.052

    Article  CAS  Google Scholar 

  17. National Academies of Sciences, Engineering, and Medicine: Opportunities and approaches for supplying molybdenum-99 and associated medical isotopes to Global Markets: proceedings of a symposium. The National Academies Press, Washington DC (2018). https://doi.org/10.17226/24909

  18. Obradovic, B.: Guidelines for general adsorption kinetics modeling. Hem. Ind. 74(1), 65–70 (2020). https://doi.org/10.2298/HEMIND200201006O

    Article  Google Scholar 

  19. Palant, A.A., Iatsenko, N.A., Petrova, V.A.: Solvent extraction of molybdenum VI by diisododecylamine from sulphuric acid solution. Hydrometallurgy 48, 83–90 (1998). https://doi.org/10.1016/S0304-386X(97)00068-6

    Article  CAS  Google Scholar 

  20. Rudzinski, W., Plazinski, W.: Kinetics of Solute Adsorption at Solid/Solution Interfaces: On the Special Features of the Initial Adsorption Kinetics. Langmuir 24, 6738–6744 (2008). https://doi.org/10.1021/la800743a

    Article  CAS  PubMed  Google Scholar 

  21. Spanos, N., Matralis, H.K., Kordulis, Ch., Lycourghiotis, A.: Molybdenum-oxo Species Deposited on Titania by Adsorption: Mechanism of the Adsorption and Characterization of the Calcined Samples. J. Catal. 136, 432–445 (1992). https://doi.org/10.1016/0021-9517(92)90074-R

    Article  CAS  Google Scholar 

  22. Terashkevich S.S., Myasnikov S. V., Chivarzin M. E.: Technology development for 99Mo extraction from irradiated fuel solution. Nauchno-tekhnicheskaya konferentsiya po yadernym tekhnologiyam dlya molodykh uchenykh, spetsialistov, studentov i aspirantov [book of abstracts for the conference “ Scientific and technical conference on nuclear technologies for young scientists, specialists, students and graduate students”]. JSC Institute of Reactor Materials 100–101 (2022), in Russian.

  23. Thilagan, J., Gopalakrishnan, S., Kannadasan, T.: Adsorption of Copper (II) ions in aqueous solution by Chitosan immobilised on Red Soil: Isotherms, Kinetics and Mechanism. Int. j. pharm. chem. sci. 2(2), 1055–1066 (2013)

    Google Scholar 

  24. Tsibranska, I., Hristova, E.: Comparison of different kinetic models for adsorption of heavy metals onto activated carbon from apricot stones. Bulg. Chem. Commun. 43(3), 370–377 (2011)

    CAS  Google Scholar 

  25. Van der Marck, S.C., Koning, A.J., Charlton, K.E.: The options for the future production of the medical isotope 99Mo. Eur. J. Nucl. Med. Mol. Imaging 37, 1817–1820 (2010). https://doi.org/10.1007/s00259-010-1500-7

    Article  PubMed  PubMed Central  Google Scholar 

  26. Viegas, R.M.C., Campinas, M., Costa, H., Rosa, M.J.: How do the HSDM and Boyd’s model compare for estimating intraparticle diffusion coefficients in adsorption processes. Adsorption 20, 737–746 (2014). https://doi.org/10.1007/s10450-014-9617-9

    Article  CAS  Google Scholar 

  27. Voroshilov, Yu.A., et al.: Process development for Mo-99 extraction on base of the inorganic sorbent “Thermoxid-5.” Radiation safety problems 50(2), 16–26 (2008)

    Google Scholar 

  28. Wang, M.-Y., et al.: Existing form of Mo(VI) in acidic sulfate solution. Rare Met. 36(7), 612–616 (2017). https://doi.org/10.1007/s12598-015-0548-8

    Article  CAS  Google Scholar 

  29. Weber W. J., Morris J. C.: Kinetics of adsorption on carbon from solutions. J. Sanit. Eng. Div., Proc. Am. Soc. Civ. Eng. 89, 31–60 (1963). https://doi.org/10.1061/JSEDAI.0000430

  30. Xia, Y., Xiao, L., Xiao, C., Zeng, L.: Direct solvent extraction of molybdenum(VI) from sulfuric acid leach solutions using PC-88A. Hydrometallurgy 158, 114–118 (2015). https://doi.org/10.1016/j.hydromet.2015.10.016

    Article  CAS  Google Scholar 

  31. Youker A. J. et al.: A Solution-based approach for Mo-99 production: considerations for nitrate versus sulfate media. Sci. Technol. Nucl. Install. 1–10 (2013). https://doi.org/10.1155/2013/402570

  32. Kinetics and diffusion analysis: Zhu Q., Moggridge G. D., D’Agostino C., Adsorption of pyridine from aqueous solutions by polymeric adsorbents MN 200 and MN 500. Part 2. Chem. Eng. J. 306, 1223–1233 (2016). https://doi.org/10.1016/j.cej.2016.07.087

    Article  CAS  Google Scholar 

Download references

Funding

The work was supported by the Russian National Research Center "Kurchatov Institute" in accordance with Decree No. 92, January 20, 2023.

Author information

Authors and Affiliations

Authors

Contributions

Experimental work on column studies was performed solely by S.M. Kinetic batch experiments were carried out by S.T. and M.C. The results obtained were proceeded, analyzed and presented by S.T. Data collection, writing and editing by S.T. All authors read and approved the final manuscript.

Corresponding author

Correspondence to Terashkevich Sergey Sergeevich.

Ethics declarations

Competing interests

The authors declare no competing interests.

Ethical approval

Not applicable.

Conflict of interest

The authors declare no competing interests.

Disclosure

The authors have no relevant financial or non-financial interests to disclose.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sergeevich, T.S., Vyacheslavovich, M.S. & Evgenevich, C.M. Kinetics based study on sorption properties of titanium dioxide concerning 99Mo production using sulfate-based aqueous targets. Adsorption (2024). https://doi.org/10.1007/s10450-024-00489-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10450-024-00489-0

Keywords

Navigation