Abstract
Previously impregnated and stored carbon fibres i.e. prepregs are a breakthrough in the composites industries. Prepregs are extremely convenient for industrial growth. Until now epoxy-based CFRP has been the focus of the industries. This report discusses a new conductive yet inexpensive resin which can be utilized in the form of prepregs owing to its long-term stability. The major prepreg enabling properties like thermal stability, rheological properties and storage effect are studied in detail. Finally, the preliminary results of the mechanical and electrical properties of the CFRP are also encompassed in this report.
Similar content being viewed by others
References
Yokozeki, T., Goto, T., Takahashi, T., Qian, D., Itou, S., Hirano, Y., Ishida, Y., Ishibashi, M., Ogasawara, T.: Development and characterization of CFRP using a polyaniline-based conductive thermoset matrix. Compos. Sci. Technol. 117, 277–281 (2015). https://doi.org/10.1016/J.COMPSCITECH.2015.06.016
Hirano, Y., Yokozeki, T., Ishida, Y., Goto, T., Takahashi, T., Qian, D., Ito, S., Ogasawara, T., Ishibashi, M.: Lightning damage suppression in a carbon fiber-reinforced polymer with a polyaniline-based conductive thermoset matrix. Compos. Sci. Technol. 127, 1–7 (2016). https://doi.org/10.1016/J.COMPSCITECH.2016.02.022
Kumar, V., Yokozeki, T., Okada, T., Hirano, Y., Goto, T., Takahashi, T., Ogasawara, T.: Effect of through-thickness electrical conductivity of CFRPs on lightning strike damages. Compos. Part A Appl. Sci. Manuf. (2018). https://doi.org/10.1016/j.compositesa.2018.09.007
Pati, S., Kumar, V., Goto, T., Takahashi, T., Yokozeki, T.: Introducing a curable dopant with methacrylate functionality for polyaniline based composites. Polym. Test. 73, 171–177 (2019). https://doi.org/10.1016/j.polymertesting.2018.11.019
Kumar, V., Yokozeki, T., Goto, T., Takahashi, T., Dhakate, S.R., Singh, B.P.: Irreversible tunability of through-thickness electrical conductivity of polyaniline-based CFRP by de-doping. Compos. Sci. Technol. 152, 20–26 (2017). https://doi.org/10.1016/J.COMPSCITECH.2017.09.005
Stewart, R.: New prepreg materials offer versatility, top performance. Reinf. Plast. (2009). https://doi.org/10.1016/s0034-3617(09)70222-x
Molyneux, M., Murray, P., P. Murray, B.: Prepreg, tape and fabric technology for advanced composites. Composites. (1983). https://doi.org/10.1016/S0010-4361(83)80003-2
Grunenfelder, L.K., Dills, A., Centea, T., Nutt, S.: Effect of prepreg format on defect control in out-of-autoclave processing. Compos. Part A Appl. Sci. Manuf. (2017). https://doi.org/10.1016/j.compositesa.2016.10.027
Katunin, A., Krukiewicz, K., Turczyn, R., Sul, P., Łasica, A., Bilewicz, M.: Synthesis and characterization of the electrically conductive polymeric composite for lightning strike protection of aircraft structures. Compos. Struct. (2017). https://doi.org/10.1016/j.compstruct.2016.10.028
Pati, S., Kumar, V., Goto, T., Takahashi, T., Yokozeki, T.: Synthesis and characterization of PANI/P-2M conductive composites: Thermal, rheological, mechanical, and electrical properties. Polym. Compos. 1–8 (2019). https://doi.org/10.1002/pc.25293
Yu, Y., Su, H., Gan, W.: Effects of Storage Aging on the Properties of Epoxy Prepregs. Ind. Eng. Chem. Res. 48, 4340–4345 (2009). https://doi.org/10.1021/ie8018005
Ji, K.J., Wei, C.Y., Deng, W.H., Zhang, Y.S., Liu, Y.J., Mao, R.Z., Wang, X.: Evaluation of Glass Fibre/Epoxy Prepreg Quality during Storage. Polym. Polym. Compos. 10, 599–606 (2002). https://doi.org/10.1177/096739110201000803
Pappalardo, L.T.: DSC evaluation of epoxy and polyimide-impregnated laminates (prepregs). J. Appl. Polym. Sci. 21, 809–820 (1977). https://doi.org/10.1002/app.1977.070210321
Costa, M.L., Rezende, M.C., de Paiva, J.M.F., Botelho, E.C.: Structural Carbon/Epoxy Prepregs Properties Comparison by Thermal and Rheological Analyses. Polym. Plast. Technol. Eng. 45, 1143–1153 (2006). https://doi.org/10.1080/03602550600887251
Guo, Z.-S.: Effects of storage aging on the cure kinetics of T700/BMI prepregs for advanced composites. Polym. Compos. 29, 1269–1275 (2008). https://doi.org/10.1002/pc.20457
Frigione, M., Kenny, J.M.: Effects of storage aging on the cure kinetics of bismaleimide prepregs. Adv. Polym. Technol. 24, 253–265 (2005). https://doi.org/10.1002/adv.20048
Antonucci, V., Giordano, M., Nicolais, L., Calabrò, A., Cusano, A., Cutolo, A., Inserra, S.: Resin flow monitoring in resin film infusion process. In: Journal of Materials Processing Technology (2003)
Garschke, C., Parlevliet, P.P., Weimer, C., Fox, B.L.: Cure kinetics and viscosity modelling of a high-performance epoxy resin film. Polym. Test. (2013). https://doi.org/10.1016/j.polymertesting.2012.09.011
Woo, I.L., Loos, A.C., Springer, G.S.: Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501–6 Resin. J. Compos. Mater. (1982). https://doi.org/10.1177/002199838201600605
Siddiqui, N.A., Khan, S.U., Ma, P.C., Li, C.Y., Kim, J.-K.: Manufacturing and characterization of carbon fibre/epoxy composite prepregs containing carbon nanotubes. Compos. Part A Appl. Sci. Manuf. 42, 1412–1420 (2011). https://doi.org/10.1016/J.COMPOSITESA.2011.06.005
Xu, Y., Hoa, S.V.: Mechanical properties of carbon fiber reinforced epoxy/clay nanocomposites. Compos. Sci. Technol. (2008). https://doi.org/10.1016/j.compscitech.2007.08.013
Gu, H., Tadakamalla, S., Zhang, X., Huang, Y., Jiang, Y., Colorado, H.A., Luo, Z., Wei, S., Guo, Z.: Epoxy resin nanosuspensions and reinforced nanocomposites from polyaniline stabilized multi-walled carbon nanotubes. J. Mater. Chem. C. (2013). https://doi.org/10.1039/c2tc00379a
Zhu, J., Wei, S., Yadav, A., Guo, Z.: Rheological behaviors and electrical conductivity of epoxy resin nanocomposites suspended with in-situ stabilized carbon nanofibers. Polymer (Guildf). 51, 2643–2651 (2010). https://doi.org/10.1016/j.polymer.2010.04.019
Yue, L., Pircheraghi, G., Monemian, S.A., Manas-Zloczower, I.: Epoxy composites with carbon nanotubes and graphene nanoplatelets – Dispersion and synergy effects. Carbon N. Y. 78, 268–278 (2014). https://doi.org/10.1016/j.carbon.2014.07.003
Corcione, C. e., Friogione, M.: A novel procedure able to predict the rheological behavior of trifunctional epoxy resin/hyperbranched aliphatic polyester mixture. Polym. Test. 28, 830–835 (2009). https://doi.org/10.1016/j.polymertesting.2009.07.005
Kamal, M.R., Mutel, A.: Rheological Properties of Suspensions in Newtonian and Non-Newtonian Fluids. J. Polym. Eng. (1985). https://doi.org/10.1515/POLYENG.1985.5.4.293
Ghijsels, A., Groesbeek, N., Raadsen, J.: Temperature dependence of the zero-shear melt viscosity of oligomeric epoxy resins. Polymer (Guildf). (1984). https://doi.org/10.1016/0032-3861(84)90203-9
Song, Y.S., Youn, J.R.: Properties of epoxy nanocomposites filled with carbon nanomaterials. e-Polymers. 4, (2013). https://doi.org/10.1515/epoly.2004.4.1.925
Roller, M.B.: Characterization of the time-temperature-viscosity behavior of curing B-staged epoxy resin. Polym. Eng. Sci. (1975). https://doi.org/10.1002/pen.760150603
Park, J.O., Jang, S.H.: Synthesis and characterization of bismaleimides from epoxy resins. J. Polym. Sci. Part A Polym. Chem. (1992). https://doi.org/10.1002/pola.1992.080300504
Sbirrazzuoli, N., Vyazovkin, S.: Learning about epoxy cure mechanisms from isoconversional analysis of DSC data. Thermochim. Acta. 388, 289–298 (2002). https://doi.org/10.1016/S0040-6031(02)00053-9
Prime, R.B.: Differential scanning calorimetry of the epoxy cure reaction. Polym. Eng. Sci. (1973). https://doi.org/10.1002/pen.760130508
Sickfeld, J., Mielke, W.: Application of thermal analysis for the investigation of epoxy resins. Prog. Org. Coatings. (1984). https://doi.org/10.1016/0033-0655(84)80003-5
Serafini, T.T., Delvigs, P., Lightsey, G.R.: Thermally stable polyimides from solutions of monomeric reactants. J. Appl. Polym. Sci. (1972). https://doi.org/10.1002/app.1972.070160409
Acknowledgements
The authors acknowledge the Japanese Society for the Promotion of Science for the grant with grant number JSPS 16H02424.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Pati, S., Manomaisantiphap, S., Goto, T. et al. Development of CFRP with Polyaniline-based Resin using Curable Dopants Employing Storage Stable Prepregs. Appl Compos Mater 28, 381–394 (2021). https://doi.org/10.1007/s10443-020-09856-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10443-020-09856-w