Abstract
In the present work residual stresses in a boron fibre/aluminium matrix composite are determined through an etching method. The inhomogeneous removal of surface layers, due to the different sensitivity of boron and aluminium to alkaline environment, requires the application of a modified technique for the estimation of deformations and the calculation of stresses. The results obtained indicate considerable deviations in both distribution and magnitude of residual stresses in the same MMC, due to different fabrication methods.
Similar content being viewed by others
References
Shulga, N. A. and Tomashevskiy, V. T., Technological Stresses and Deformations in Materials, Nauka, Moscow, 1964.
Morfin, L., ‘Measurements of Residual Stresses: Problems and Opportunities’, in Residual Stress for Designers and Metallurgists, American Society for Metal Park, OH, 1981, pp. 189–210.
Williams, J. E. and Stouffer, D. C., ‘An Estimate of the Residual Stress Distribution in the Vicinity of a Propagating Fatigue Crack’, Engineering Fracture Mechanics 11, 1979, 547–553.
Leverant, G. R. and Langer, B. S., ‘Surface Residual Stresses, Surface Topography and the Fatigue Behavior of Ti-GAL-4V’, Metallurgical Transactions 10, 1979, 251–263.
Birger, I. A., in Residual Stresses, Nauka, Moscow, 1963, p. 324.
McClintock, F. A. and Argon, A. S., Mechanical Behavior of Materials, Addison-Wesley, MA, USA, 1966.
Gasparyan, S. H., ‘Measuring of Residual Stresses in Boron Fibre Aluminum Matrix Composites’, Reports of the National Academy of Sciences and the State Engineering University of Armenia. Series of Technical Sciences XXXV, 1982, 16–21.
Gasparyan, S. H. and Gevorkyan, S. Kh., ‘Definition of Residual Stresses’, in Internat. Conf. on Theoretical and Applied Mechanics, Yerevan, 1994.
Kreider, K. G. and Prewo, K. M., ‘Boron-Fibre Aluminum-Matrix Composites’, in Composite Materials 4, Metallic Matrix Composites, Academic Press, New York, 1974, pp. 419–494.
Gasparyan, S. H., ‘Determination of Effective Moduli of Fibrous Composite Materials’, Reports of the National Academy of Armenia. Series of Technical Sciences XLIX, 1996, 59–62.
Gasparyan, S. H., ‘Determination of Boron-Aluminum Composites’ Residual Stresses’, Proceedings of National Academy of Sciences of Armenia. Mechanics 53, 2000, 73–77.
Hahn, G. J. and Shapiro, S. S., Statistical Models in Engineering, McGraw-Hill, New York, 1967.
Author information
Authors and Affiliations
Corresponding author
Additional information
N. P. Andrianopoulos: Corresponding author.
Rights and permissions
About this article
Cite this article
Gasparyan, S.H., Andrianopoulos, N.P. Determination of Residual Stresses in a Boron Fibre/Aluminium Matrix Composite. Appl Compos Mater 12, 65–72 (2005). https://doi.org/10.1007/s10443-004-4013-3
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10443-004-4013-3