Advertisement

Acta Mechanica Sinica

, Volume 34, Issue 5, pp 910–924 | Cite as

A simplified approximate model of compressible hypervelocity penetration

  • Wenjie Song
  • Xiaowei Chen
  • Pu Chen
Research Paper
  • 86 Downloads

Abstract

A simplified approximate model considering rod/target material’s compressibility is proposed for hypervelocity penetration. We study the effect of shockwaves on hypervelocity penetration whenever the compressibility of the rod is much larger, analogously, and much less than that of the target, respectively. The results show that the effect of shockwaves is insignificant up to 12 km/s, so the shockwave is neglected in the present approximate model. The Murnaghan equation of state is adopted to simulate the material behaviors in penetration and its validity is proved. The approximate model is finally reduced to an equation depending only on the penetration velocity and a simple approximate solution is achieved. The solution of the approximate model is in agreement with the result of the complete compressible model. In addition, the effect of shockwaves on hypervelocity penetration is shown to weaken material’s compressibility and reduce the interface pressure of the rod/target, and thus the striking/protective performance of the rod/target is weakened, respectively. We also conduct an error analysis of the interface pressure and penetration efficiency. With a velocity change of 1.6 times the initial sound speed for the rod or target, the error of the approximate model is very small. For metallic rod–target combinations, the approximate model is applicable even at an impact velocity of 12 km/s.

Keywords

Compressibility Approximate model Shockwave Hypervelocity penetration Equation of state (EOS) 

Notes

Acknowledgements

The work was supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (11521202), the National Outstanding Young Scientist Foundation of China (11225213), and the Key Subject “Computational Solid Mechanics” of China Academy of Engineering Physics.

References

  1. 1.
    Birkhoff, G., MacDougall, D.P., Pugh, E.M., et al.: Explosives with lined cavities. J. Appl. Phys. 19, 563–82 (1948)CrossRefGoogle Scholar
  2. 2.
    Hill, R., Mott, N.F., Pack, D.C., et al.: Theoretical Research Report No. 2/44, Jan. 1944 and 13/44 Mar. 1944Google Scholar
  3. 3.
    Eichelberger, R.J.: Experimental test of the theory of penetration by metallic jets. J. Appl. Phys. 27, 63–68 (1956)CrossRefGoogle Scholar
  4. 4.
    Alekseevskii, V.P.: Penetration of a rod into target at high velocity. Combust. Explos. Shock 2, 63–66 (1966)CrossRefGoogle Scholar
  5. 5.
    Tate, A.: A theory for the deceleration of long rods after impact. J. Mech. Phys. Solids. 15, 387–399 (1967)CrossRefGoogle Scholar
  6. 6.
    Tate, A.: Further results in the theory of long rod penetration. J. Mech. Phys. Solids. 17, 141–50 (1969)MathSciNetCrossRefGoogle Scholar
  7. 7.
    Jiao, W.J., Chen, X.W.: Approximate solutions of the Alekseevskii-Tate model of long-rod penetration. Acta Mech. Sin. 34, 334–348 (2018)MathSciNetCrossRefGoogle Scholar
  8. 8.
    Wu, H., Chen, X.W., He, L.L., et al.: Stability analyses of the mass abrasive projectile high-speed penetrating into concrete target. Part I: engineering model for the mass loss and nose-blunting of the ogive-nosed projectile. Acta Mech. Sin. 30, 1–10 (2014)CrossRefGoogle Scholar
  9. 9.
    Wu, H., Chen, X.W., Fang, Q., et al.: Stability analyses of the mass abrasive projectile high-speed penetrating into concrete target. Part II: structural stability analyses. Acta Mech. Sin. 30, 943–955 (2014)CrossRefGoogle Scholar
  10. 10.
    Wu, H., Chen, X.W., Fang, Q., et al.: Stability analyses of the mass abrasive projectile high-speed penetrating into a concrete target. Part III: terminal ballistic trajectory analyses. Acta Mech. Sin. 31, 558–569 (2015)CrossRefGoogle Scholar
  11. 11.
    Haugstad, B.S.: Compressibility effects in shaped charge jet penetration. J. Appl. Phys. 52, 1243–1246 (1981)CrossRefGoogle Scholar
  12. 12.
    Haugstad, B.S., Dullum, O.S.: Finite compressibility in shaped charge jet and long rod penetration—the effect of shocks. J. Appl. Phys. 52, 5066–5071 (1981)CrossRefGoogle Scholar
  13. 13.
    Flis, W.J., Chou, P.C.: Penetration of compressible materials by shaped-charge jets. In: Proceedings of the 7th International Symposium on Ballistics, Netherlands (1983)Google Scholar
  14. 14.
    Anderson, C.E., Orphal, D.L.: An examination of deviations from hydrodynamic penetration theory. Int. J. Impact Eng. 35, 1386–1392 (2008)CrossRefGoogle Scholar
  15. 15.
    Grove, B.: Theoretical considerations on the penetration of powdered metal jets. Int. J. Impact Eng. 33, 316–325 (2006)CrossRefGoogle Scholar
  16. 16.
    Shi, C., Wang, M., Zhang, K., et al.: Semi-analytical model for rigid and erosive long rods penetration into sand with consideration of compressibility. Int. J. Impact Eng. 83, 1–10 (2015)CrossRefGoogle Scholar
  17. 17.
    Osipenko, K.Y., Simonov, I.V.: On the jet collision: general model and reduction to the Mie–Grüneisen state equation. Mech. Solids 44, 639–648 (2009)CrossRefGoogle Scholar
  18. 18.
    Flis, W.J.: A model of compressible jet penetration. In: Proceedings of the 26th International Symposium on Ballistics, USA (2011)Google Scholar
  19. 19.
    Flis, W.J.: A jet penetration model incorporating effects of compressibility and target strength. Proc. Eng. 58, 204–213 (2013)CrossRefGoogle Scholar
  20. 20.
    Song, W.J., Chen, X.W., Chen, P.: Effect of compressibility on the hypervelocity penetration. Acta Mech. Sin. 34(1), 82–98 (2018)MathSciNetCrossRefGoogle Scholar
  21. 21.
    Fedorov, S.V., Bayanova, Y.M.: Hydrodynamic model for penetration of extended projectiles with consideration of material compressibility. In: Proceedings of the 25th International Symposium on Ballistics, China (2010)Google Scholar
  22. 22.
    Flis, W.J.: A simplified approximate model of compressible jet penetration. In: Proceedings of the 27th International Symposium on Ballistics, Germany (2013)Google Scholar
  23. 23.
    Corbett, B.M.: Numerical simulations of target hole diameters for hypervelocity impacts into elevated and room temperature bumpers. Int. J. Impact Eng. 33, 431–440 (2006)CrossRefGoogle Scholar
  24. 24.
    Steinberg, D.J.: Equation of state and strength properties of selected materials, Technical Report UCRL-MA-106439. Lawrence Livermore National Laboratory, Livermore, CA, USA (1991)Google Scholar

Copyright information

© The Chinese Society of Theoretical and Applied Mechanics; Institute of Mechanics, Chinese Academy of Sciences and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Mechanics and Engineering Science, College of EngineeringPeking UniversityBeijingChina
  2. 2.Centre for Applied Physics and Technology (CAPT)Peking UniversityBeijingChina
  3. 3.Advanced Research Institute for Multidisciplinary ScienceBeijing Institute of TechnologyBeijingChina
  4. 4.State Key Lab of Explosion Science and TechnologyBeijing Institute of TechnologyBeijingChina

Personalised recommendations