Influence of layer orientation and interlayer bonding force on the mechanical behavior of shale under Brazilian test conditions
- 152 Downloads
The mechanical behavior of inherently anisotropic shale rocks under Brazilian test conditions are investigated in this study based on experimental studies and numerical simulations. The effects of the weak lamination planes and interlayer bonding force of these layers on the failure strength and fracture patterns are studied systematically. Numerical simulations using particle flow code in two dimensions based on the discrete element method showed a good agreement with the experimental results in the failure strength and fracture patterns. The shale revealed strong anisotropic behavior with the failure strength perpendicular to the lamination plane greater than failure strength parallel to lamination plane. The failure strength of the different interlayer bonding force against the layer orientations changed significantly. Four types of fracture patterns were observed: curved fracture, broken-linear fracture, layer-activated fracture, and central-linear fracture. The observed fracture patterns are either or a combination of tensile and/or shear fractures. Increase in interlayer bonding strength decreased the quantity of micro cracks and this directly led to reduction in the anisotropic behavior. Overall the layer orientation and interlayer bonding force of the shale thus play a very important role in the anisotropic behavior of the shale.
KeywordsAnisotropy Interlayer bonding force Layer orientation Mechanical behavior Shale
The project was supported by the National Natural Science Foundation of China (Grants 41572310, 41272351, and 41227901) and the Strategic Priority Research Program of the Chinese Academy of Sciences (Grants XDB10030301 and XDB10030304). Authors acknowledge their sincere thanks to Prof. Jijin Yang and Prof. Lihui Li for their helpful microscopic information on the shale.
- 1.Mitchell, J.K., Soga, K.: Fundamentals of Soil Behavior. Wiley, New York (2005)Google Scholar
- 2.Terzagi, K., Peck, R.B., Gholamreza, M.: Soil Mechanics in Engineering Practice. Wiley, New York (1996)Google Scholar
- 3.Boggs, S.J.: Principles of Sedimentology and Stratigraphy. Merrill Publishing Company, Westerville (1987)Google Scholar
- 8.ISRM: Suggested methods for determining tensile strength of rock materials. Int. J. Rock Mech. Min. Sci. 15, 99–103 (1978)Google Scholar
- 9.Amadei, B., Rogers, J.D., Goodman, R.E.: Elastic Constants and Tensile Strength of Anisotropic Rocks. In: 5th ISRM Congress, ISRM-5CONGRESS-1983-030. Melbourne, Australia (1983)Google Scholar
- 10.Lekhnitskii, S.G.: Anisotropic Plates. Gordon and Breach, New York (1968)Google Scholar
- 12.Tavallali, A., Vervoort, A.: Failure of transversely isotropic rock material: effect of layer orientation and material properties. In: The 6th International Symposium on Ground Support in Mining and Civil engineering Construction, 317–328. Cape Town, South Africa (2008)Google Scholar
- 13.Vervoort, A., Tavallali, A.: Effect of layer orientation on the failure of layered sandstone under Brazilian test conditions. Int. J. Rock Mech. Min. Sci. 47, 313–322 (2010)Google Scholar
- 17.Duan, K., Kwok, C.Y.: Discrete element modeling of anisotropic rock under Brazilian test conditions. Int. J. Rock Mech. Min. Sci. 78, 46–56 (2015)Google Scholar
- 20.Tavallali, A., Vervoort, A.: Behaviour of layered sandstone under Brazilian test conditions: layer orientation and shape effects. J. Rock Mech. Geotech. Eng. 5, 366–377 (2013)Google Scholar
- 22.Weng, M.C., Li, H.H.: Relationship between the deformation characteristics and microscopic properties of sandstone explored by the bonded-particle model. Int. J. Rock Mech. Min. Sci. 56, 34–43 (2012)Google Scholar