Skip to main content
Log in

Dynamic model and performance analysis of landing buffer for bionic locust mechanism

  • Research Paper
  • Published:
Acta Mechanica Sinica Aims and scope Submit manuscript

Abstract

The landing buffer is an important problem in the research on bionic locust jumping robots, and the different modes of landing and buffering can affect the dynamic performance of the buffering process significantly. Based on an experimental observation, the different modes of landing and buffering are determined, which include the different numbers of landing legs and different motion modes of legs in the buffering process. Then a bionic locust mechanism is established, and the springs are used to replace the leg muscles to achieve a buffering effect. To reveal the dynamic performance in the buffering process of the bionic locust mechanism, a dynamic model is established with different modes of landing and buffering. In particular, to analyze the buffering process conveniently, an equivalent vibration dynamic model of the bionic locust mechanism is proposed. Given the support forces of the ground to the leg links, which can be obtained from the dynamic model, the spring forces of the legs and the impact resistance of each leg are the important parameters affecting buffering performance, and evaluation principles for buffering performance are proposed according to the aforementioned parameters. Based on the dynamic model and these evaluation principles, the buffering performances are analyzed and compared in different modes of landing and buffering on a horizontal plane and an inclined plane. The results show that the mechanism with the ends of the legs sliding can obtain a better dynamic performance. This study offers primary theories for buffering dynamics and an evaluation of landing buffer performance, and it establishes a theoretical basis for studies and engineering applications.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22

Similar content being viewed by others

References

  1. Nguyen, Q.V., Park, H.C.: Design and demonstration of a locust-like jumping mechanism for small-scale Robots. J. Bionic Eng. 9, 271–281 (2012)

    Article  Google Scholar 

  2. Zhang, J., Song, G.M., Li, Y.Y., et al.: A bio-inspired jumping robot: Modeling, simulation, design, and experimental results. Mechatronics 8, 1123–1140 (2013)

  3. Chen, D.S., Yin, J.M., Chen, K.W., et al.: Biomechanical and dynamic mechanism of locust take-off. Acta Mech. Sin. 5, 762–774 (2014)

  4. Chen, D.S., Yin, J.M., Huang, Y., et al.: A hopping-righting mechanism analysis and design of the mobile robot. J. Braz. Mech. Sci. 35, 469–478 (2013)

    Article  Google Scholar 

  5. Chen, D.S., Yin, J.M., Chen, K.W., et al.: Prototype design and experimental study on locust air-posture righting. J. Bionic Eng. 11, 459–468 (2014)

    Article  Google Scholar 

  6. Niiyama, R., Nagakubo, A., Kuniyoshi, Y.: Mowgli: A bipedal jumping and landing robot with an artificial musculoskeletal system. In: Proceeding of the 2007 IEEE International Conference on Robotics and Automation, pp. 2546–2551. Roma, Italy (2007)

  7. Hyon, S.H., Emura, T., Mita, T.: Dynamics-based control of a one-legged hopping robot. P. I. Mech. Eng. I-J Sys. 217, 83–98 (2003)

    Google Scholar 

  8. Hyon, S. H., Mita, T.: Development of a biologically inspired hopping robot–“Kenken”. In: Proceeding of the 2002 IEEE International Conference on Robotics and Automation, pp. 3984–3991. Washington, DC (2002)

  9. Brown, B., Zeglin, G.: The bow leg hopping robot. In: Proceeding of the 1998 IEEE International Conference on Robotics and Automation, pp. 781-786. Leuven, Belgium (1998)

  10. Zhao, J., Xi, N., Gao, B. et al: Development of a controllable and continuous jumping robot. In: Proceeding of the 2011 IEEE International Conference on Robotics and Automation (ICRA), pp. 4614–4619. Shanghai (2011)

  11. Palmer, L.R., Orin, D.E., Marhefka, D.W. et al: Intelligent control of an experimental articulated leg for a galloping machine. In: Proceeding of the IEEE International Conference on Robotics and Automation, pp. 3821–3827. Taipei, Taiwan (2003)

  12. Nichol, J.G., Singh, S.P.N., Waldron, K.J., et al.: System design of a quadrupedal galloping machine. Int. J. Robot. RES. 23, 1013–1027 (2004)

    Article  Google Scholar 

  13. Zhou, Xiaodong, Bi, Shusheng: A survey of bio-inspired compliant legged robot designs. BIOINSPIR. BIOMIM. 7, 1–20 (2012)

    Article  Google Scholar 

  14. Birkmeyer, P., Peterson, K., Fearing, R.S.: DASH: A dynamic 16g hexapedal robot. In: Proceeding of the 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2683–2689. St. Louis, USA (2009)

  15. Wood, R.J., Avadhanula, S., Sahai, R., et al.: Microrobot design using fiber reinforced composites. J. Mech. Des. 130, 052304 (2008)

  16. Galloway, K.C., Clark, J.E., Koditschek, D.E.: Design of a tunable stiffness composite leg for dynamic locomotion. In: Proceeding of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, pp. 1-8. San Diego, California (2009)

  17. Poulakakis, I., Papadopoulos, E., Buehler, M.: On the stability of the passive dynamics of quadrupedal running with a bounding gait. The Int. J. Robot. RES. 25, 669–687 (2006)

    Article  Google Scholar 

  18. Papadopoulos, D., Buehler, M.: Stable running in a quadruped robot with compliant legs. In: IEEE International Conference on Robotics and Automation, pp. 444–449. San Francisco, CA (2000)

  19. Dai, Z.D., Gorb, N.S.: Contact mechanics of pad of grasshopper (Insecta ORTHOPTERA) by finite element methods. Chin. Sci. Bull. 54, 549–555 (2009)

    Article  Google Scholar 

  20. Jiao, Y.K., Gorb, N.S., Scherge, M.: Adhesion measured on the attachment pads of Tettigonia viridissima (Orthopter, Insecta). J. Exp. Biol. 203, 1887–1895 (2000)

    Google Scholar 

  21. Burrows, M., Morris, G.: The kinematics and neural control of high-speed kicking movements in the locust. J. Exp. Biol. 204, 3471–3481 (2001)

    Google Scholar 

  22. Huang, Z., Zhao, Y.S., Zhao, T.S.: Advanced Spatial Mechanism. Higher Education Press, Beijing (2006). (in Chinese)

    Google Scholar 

  23. Zhou, J.Q., Zhu, Y.Y.: Nonlinear Vibration. Xi’an Jiao Tong University press, Xi’an (1998). (in Chinese)

    Google Scholar 

  24. Liu, H.W.: Mechanics of Materials. Higher Education Press, Beijing (2004). (in Chinese)

    Google Scholar 

  25. Zhao, Y., Huang, Z.: Force analysis of lower-mobility parallel mechanisms with over-constrained couples. J. Mech. Eng. 46, 15–21 (2010). (in Chinese)

    Article  Google Scholar 

Download references

Acknowledgments

This project was supported by the National Natural Science Foundation of China (Grant 51375035) and the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant 20121102110021).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Dian-Sheng Chen.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chen, DS., Zhang, ZQ. & Chen, KW. Dynamic model and performance analysis of landing buffer for bionic locust mechanism. Acta Mech. Sin. 32, 551–565 (2016). https://doi.org/10.1007/s10409-015-0523-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10409-015-0523-5

Keywords

Navigation