Abstract
A level set method of non-uniform grids is used to simulate the whole evolution of a cavitation bubble, including its growth, collapse and rebound near a rigid wall. Single-phase Navier–Stokes equation in the liquid region is solved by MAC projection algorithm combined with second-order ENO scheme for the advection terms. The moving interface is captured by the level set function, and the interface velocity is resolved by “one-side” velocity extension from the liquid region to the bubble region, complementing the second-order weighted least squares method across the interface and projection inside bubble. The use of non-uniform grid overcomes the difficulty caused by the large computational domain and very small bubble size. The computation is very stable without suffering from large flow-field gradients, and the results are in good agreements with other studies. The bubble interface kinematics, dynamics and its effect on the wall are highlighted, which shows that the code can effectively capture the “shock wave”-like pressure and velocity at jet impact, toroidal bubble, and complicated pressure structure with peak, plateau and valley in the later stage of bubble oscillating.
Similar content being viewed by others
References
Best J.P. (1993). The formation of toroidal bubbles upon the collapse of transient cavities. J. Fluid Mech. 251: 79–107
Best J.P., Kucera A. (1992). A numerical investigation of non—spherical rebounding bubbles. J. Fluid Mech. 245: 137–154
Deshpande, N.V.: Fluid mechanics of bubble growth and collapse in a thermal inkjet printer. In: SPSE/SPIES Electronic Imaging Devices and Systems Symposium, January (1989)
Plesset M.S., Chapman R.B. (1971). Collapse of an initial spherical vapor cavity in the neighbourhood of a solid boundary. J. Fluid Mech. 47: 283–290
Robinson P.B., Blake J.R., Kodama T. (2001). Interaction of cavitation bubbles with a free surface. J. Appl. Phys. 89(1): 8225–8237
Zhang S., Duncan J.H., Chahine G.L. (1993). The final stage of the collapse of a cavity bubble near a rigid wall. J. Fluid Mech. 257: 147–181
Szymczak W.G., Rogers J., Solomon J.M., Berger A.E. (1993). A numerical algorithm for hydrodynamics free boundary problems. J. Comput. Phys. 106: 319–336
Enright, D.E., Marschner, S., Fedkiw, R.: Animation and rendering of complex water surfaces. SIGGRAPH, ACM TOG 21, pp. 736–744 (2002)
Sussman M. (2003). A second order coupled level set and volume–of–fluid method for computing growth and collapse of vapor bubbles. J. Comput. Phys. 187(1): 110–136
Huang J.T., Zhang H.S. (2005). Level set method for numerical simulation of a cavitation bubble collapsing near a rigid wall. J. Hydrodyn. Ser. B 17(6): 647–653
Huang J.T., Zhang H.S. (2004). A level set method for simulation of rising bubble. J. Hydrodyn. Ser. B 16(4): 379–385
Tong R.P., Schiffers W.P., Shaw S.J., Blake J.R., Emmony D.C. (1999). The role of ‘splashing’ in the collapse of a laser—generated cavity near a rigid boundary. J. Fluid Mech. 380: 339–361
Gibou F., Fedkiw R., Cheng L.T., Kang M. (2002). A second order accurate symmetric discretization of the poisson equation on irregular domains. J. Comput. Phys. 176(1): 205–227
Author information
Authors and Affiliations
Corresponding author
Additional information
The project supported by the National Natural Science Foundation of China (10272032 and 10672043).
The English text was polished by Keren Wang.
Rights and permissions
About this article
Cite this article
Huang, J., Zhang, H. Level set method for numerical simulation of a cavitation bubble, its growth, collapse and rebound near a rigid wall. Acta Mech. Sin. 23, 645–653 (2007). https://doi.org/10.1007/s10409-007-0104-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10409-007-0104-3