Abstract
Drag is a major concern in microfluidic devices impacting flow stability, energy efficiency, and fluid flow control. Minimizing drag enhances performance and efficiency in various applications, such as flow stabilization microdevices, microvalves, and micropumps. Often, superhydrophobicity is utilized for drag-reduction applications. However, superhydrophobic surfaces tend to fail at higher Reynolds numbers. This paper investigates the pressure-flow characteristics of a microchannel having a superhydrophobic bottom wall with embedded air-cavities, and a deformable top membrane, both numerically and theoretically. The aim is to understand fluid flows in the deformable superhydrophobic microchannel and leverage its water-repellent property and deformability both together to reduce drag while maintaining the durability of the superhydrophobic wall. Two-way fluid–structure interaction (FSI) and unsteady volume of fluid (VOF) methods are employed for fluid–solid boundary and liquid–air interface at ridge-cavity, respectively. A novel theoretical model has been developed for the pressure-flow characteristics of a microchannel with a deformable top and superhydrophobic bottom wall. The theoretical and numerical results for pressure drop across the microchannel have shown a good agreement with a maximum deviation of 6.69%. Four distinct types of microchannels viz, smooth (S) (rigid non-textured), smooth with deformable top (SDT), smooth with superhydrophobic bottom (SSB), and smooth with superhydrophobic bottom and deformable top wall (SSBDT) have been investigated for the comparison of their pressure-flow characteristics. The Poiseuille Number (fRe) for SSBDT microchannel is found to be lowest with an average of 18.7% and a maximum of 23.5% lower than S microchannel at Re = 60. Up to 48.59% of reduction in pressure drop was observed for the SSBDT microchannel as compared to smooth (S) microchannel of the same dimensions. Furthermore, critical Reynolds Number (Recritical) (at which the air–water interface breaks and super-hydrophobicity vanishes) was found to be ~ 20% higher for the SSBDT microchannel compared to the SSB microchannel. Thus, the wall compliance in the SSBDT microchannel is found to increase the capability to sustain the super-hydrophobicity at higher Re numbers. The proposed approach for drag reduction in microchannel can be vital to enhance the efficiency and capability of numerous microdevices needing high Reynolds number flows, such as high throughput cell sorters, microvalves, and micropumps.
Similar content being viewed by others
Data availability
The data that support the findings of this study is available from the corresponding author upon request.
Abbreviations
- A c :
-
Cross-sectional area (m2)
- D h :
-
Hydraulic diameter (m)
- f :
-
Friction factor
- H :
-
Height of the undeformed main channel (m)
- h :
-
Height of the channel at a particular distance from inlet in the flow direction (m)
- L :
-
Length of the channel (m)
- L c :
-
Length of the cavity (m)
- Y :
-
Young’s modulus (Pa)
- t :
-
Thickness of top wall (m)
- W :
-
Width of the channel (m)
- P f :
-
Fluid perimeter of the cross section (m)
- p :
-
Pressure (Pa)
- Re:
-
Reynolds number
- Q :
-
Flow rate (m3s−1)
- u :
-
Velocity (ms−1)
- x,y,z :
-
Cartesian coordinates (m)
- in:
-
Inlet
- o:
-
Outlet
- w:
-
Water–liquid
- a:
-
Air
- c:
-
Cavity
- s:
-
Smooth channel
- \(\phi_{{\text{w}}}\) :
-
Volume fraction of water
- λ :
-
Dimensional slip length
- \(\delta_{{\text{c}}}\) :
-
Gas fraction (Lc/L)
- \(\Pi\) :
-
Fractional reduction in pressure drop
- \(\mu\) :
-
Dynamic viscosity (Pa.s)
- \(\rho\) :
-
Density (kgm−3)
- \(\nu\) :
-
Poisson’s ratio
- \({\Delta }p\) :
-
Pressure drop across channel (Pa)
- S:
-
Smooth
- SDT:
-
Smooth with deformable top
- SSB:
-
Smooth with superhydrophobic bottom
- SSBDT:
-
Smooth with superhydrophobic bottom and deformable top
- VOF:
-
Volume of fluid
- FSI:
-
Fluid–structure interaction
References
Albadawi A, Donoghue DB, Robinson AJ et al (2014) On the assessment of a VOF based compressive interface capturing scheme for the analysis of bubble impact on and bounce from a flat horizontal surface. Int J Multiph Flow 65:82–97. https://doi.org/10.1016/j.ijmultiphaseflow.2014.05.017
Amit K, Datta A, Biswas N et al (2021) Designing of microsink to maximize the thermal performance and minimize the Entropy generation with the role of flow structures. Int J Heat Mass Transf 176:121421. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121421
Anez DV, Hadji C, Santanach E et al (2021) Microfluidic channels of adjustable height using deformable elastomer. Microfluid Nanofluidics. https://doi.org/10.1007/s10404-020-02408-5
Ansys System Coupling User’s Guide; ANSYS® Academic Research, Release 19.1
Aota A, Mawatari K, Kitamori T (2009) Parallel multiphase microflows: Fundamental physics, stabilization methods and applications. Lab Chip 9:2470–2476. https://doi.org/10.1039/b904430m
Arjun M, Dilip D, Ranjith SK (2021) Effect of interface curvature on isothermal heat transfer in a hydrophobic microchannel with transverse ribs and cavities. Int J Therm Sci 167:107014. https://doi.org/10.1016/j.ijthermalsci.2020.106729
Arun MG, Dilip D, Ranjith SK (2021) Effect of interface curvature on isothermal heat transfer in a hydrophobic microchannel with transverse ribs and cavities. Int J Therm Sci 167:107014. https://doi.org/10.1016/j.ijthermalsci.2021.107014
Asmolov ES, Dubov AL, Nizkaya TV et al (2015) Principles of transverse flow fractionation of microparticles in superhydrophobic channels. Lab Chip 15:2835–2841. https://doi.org/10.1039/c5lc00310e
Beech JP, Tegenfeldt JO (2008) Tuneable separation in elastomeric microfluidics devices. Lab Chip 8:657–659. https://doi.org/10.1039/b719449h
Bhagat AAS, Hou HW, Li LD et al (2011) Pinched flow coupled shear-modulated inertial microfluidics for high-throughput rare blood cell separation. Lab Chip 11:1870–1878. https://doi.org/10.1039/c0lc00633e
Cheng H, Liu H, Li W, Li M (2021) Recent advances in magnetic digital microfluidic platforms. Electrophoresis 42:2329–2346. https://doi.org/10.1002/elps.202100088
Christov IC, Cognet V, Shidhore TC, Stone HA (2018) Flow rate-pressure drop relation for deformable shallow microfluidic channels. J Fluid Mech 841:267–286. https://doi.org/10.1017/jfm.2018.30
Chrit FE, Raj A, Young KM et al (2021) Microfluidic platform to transduce cell viability to distinct flow pathways for high-accuracy sensing. ACS Sensors 6:3789–3799. https://doi.org/10.1021/acssensors.1c01770
Das A, Bhaumik SK (2018) Fabrication of cylindrical superhydrophobic microchannels by replicating lotus leaf structures on internal walls. J Micromech Microeng. https://doi.org/10.1088/1361-6439/aaab36
Datta A, Debbarma D, Biswas N et al (2020) The role of flow structures on the thermal performance of microchannels with wall features. J Therm Sci Eng Appl 13:1–11. https://doi.org/10.1115/1.4047709
Datta A, Sharma V, Sanyal D, Das P (2019) A conjugate heat transfer analysis of performance for rectangular microchannel with trapezoidal cavities and ribs. Int J Therm Sci 138:425–446. https://doi.org/10.1016/j.ijthermalsci.2018.12.020
Davies J, Maynes D, Webb BW, Woolford B (2006) Laminar flow in a microchannel with superhydrophobic walls exhibiting transverse ribs. Phys Fluids 18:087110. https://doi.org/10.1063/1.2336453
Davies JW (2006) Analysis of viscous drag reduction and thermal transport effects for microengineered ultrahydrophobic surfaces. Brigham Young Univ Theses Diss 2006-03-16
Dey P, Saha SK, Chakraborty S (2018) Microgroove geometry dictates slippery hydrodynamics on superhydrophobic substrates. Phys Fluids. https://doi.org/10.1063/1.5063630
Dey P, Saha SK, Chakraborty S (2019) Air-water meniscus shape in superhydrophobic triangular microgroove is dictated by a critical pressure under dynamic conditions. Phys Fluids. https://doi.org/10.1063/1.5119412
Dey P, Saha SK, Chakraborty S (2020) Confluence of channel dimensions and groove width dictates slippery hydrodynamics in grooved hydrophobic confinements. Microfluid Nanofluidics 24:1–15. https://doi.org/10.1007/s10404-019-2297-8
Dincau BM, Aghilinejad A, Chen X et al (2018) Vortex-free high-Reynolds deterministic lateral displacement (DLD) via airfoil pillars. Microfluid Nanofluidics 22:1–9. https://doi.org/10.1007/s10404-018-2160-3
Gaddam A, Agrawal A, Joshi SS, Thompson MC (2015a) Utilization of cavity vortex to delay the wetting transition in one-dimensional structured microchannels. Langmuir 31:13373–13384. https://doi.org/10.1021/acs.langmuir.5b03666
Gaddam A, Garg M, Agrawal A, Joshi SS (2015b) Modeling of liquid–gas meniscus for textured surfaces: effects of curvature and local slip length. J Micromech Microeng 25:125002. https://doi.org/10.1088/0960-1317/25/12/125002
Gaddam A, Sharma H, Ahuja R et al (2021) Hydrodynamic drag reduction of shear-thinning liquids in superhydrophobic textured microchannels. Microfluid Nanofluidics 25:73
Ganapathy H, Al-Hajri E, Ohadi MM (2013) Phase field modeling of Taylor flow in mini/microchannels, Part I: bubble formation mechanisms and phase field parameters. Chem Eng Sci 94:138–149. https://doi.org/10.1016/j.ces.2013.01.049
García-Cartagena EJ, Arenas I, An J, Leonardi S (2019) Dependence of the drag over superhydrophobic and liquid infused surfaces on the asperities of the substrate. Phys Rev Fluids 114604:1–23. https://doi.org/10.1103/PhysRevFluids.4.114604
Gentili D, Bolognesi G, Giacomello A et al (2014) Pressure effects on water slippage over silane-coated rough surfaces: pillars and holes. Microfluid Nanofluidics 16:1009–1018. https://doi.org/10.1007/s10404-014-1376-0
Gervais T, El-Ali J, Günther A, Jensen KF (2006) Flow-induced deformation of shallow microfluidic channels. Lab Chip 6:500–507. https://doi.org/10.1039/b513524a
Gogte S, Vorobieff P, Truesdell R et al (2005) Effective slip on textured superhydrophobic surfaces. Phys Fluids 17:1–4. https://doi.org/10.1063/1.1896405
Gong W, Shen J, Dai W et al (2019) Thermal-hydraulic performance enhancement analysis of microtube with superhydrophobic surfaces. Int J Heat Mass Transf 144:118697. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118697
Haider SA, Raj A (2023) Liquid drops on compliant and non-compliant substrates: an ellipsoid-based fitting for approximating drop shape and volume. Microfluid Nanofluidics 27:1–17. https://doi.org/10.1007/s10404-023-02659-y
Hardy BS, Uechi K, Zhen J, Pirouz Kavehpour H (2009) The deformation of flexible PDMS microchannels under a pressure driven flow. Lab Chip 9:935–938. https://doi.org/10.1039/b813061b
Heo S, Choi W, Lee SJ (2021) Enhanced air stability of ridged superhydrophobic surface with nanostructure. AIP Adv 11:105209. https://doi.org/10.1063/5.0067279
Hirt CW, Nichols BD (1981) Hirt and Nichols—1981—Volume of fluid (VOF) method for the dynamics of f(1).pdf. J Comput Phys 39:201–225
Hosokawa K, Hanada K, Maeda R (2002) A polydimethylsiloxane (PDMS) deformable diffraction grating for monitoring of local pressure in microfluidic devices. J Micromech Microeng 12:1–6. https://doi.org/10.1088/0960-1317/12/1/301
Hsiung SK, Chen CT, Bin LG (2006) Micro-droplet formation utilizing microfluidic flow focusing and controllable moving-wall chopping techniques. J Micromech Microeng 16:2403–2410. https://doi.org/10.1088/0960-1317/16/11/022
Huang CJ, Fang WF, Ke MS et al (2014) A biocompatible open-surface droplet manipulation platform for detection of multi-nucleotide polymorphism. Lab Chip 14:2057–2062. https://doi.org/10.1039/c4lc00089g
Idrees AK, Al-Ameri R (2023) Investigation of flow characteristics and energy dissipation over new shape of the trapezoidal labyrinth weirs. Flow Meas Instrum 89:102276. https://doi.org/10.1016/j.flowmeasinst.2022.102276
Islam M, Raj A, McFarland B et al (2020) Stiffness based enrichment of leukemia cells using microfluidics. APL Bioeng. https://doi.org/10.1063/1.5143436
Iyer V, Raj A, Annabattula RK, Sen AK (2015) Experimental and numerical studies of a microfluidic device with compliant chambers for flow stabilization. J Micromech Microeng. https://doi.org/10.1088/0960-1317/25/7/075003
Jeong OC, Park SW, Yang SS, Pak JJ (2005) Fabrication of a peristaltic PDMS micropump. Sens Actuators A Phys 123–124:453–458. https://doi.org/10.1016/j.sna.2005.01.035
Johnston ID, McCluskey DK, Tan CKL, Tracey MC (2014) Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering. J Micromech Microeng. https://doi.org/10.1088/0960-1317/24/3/035017
Kant K, Pitchumani R (2021) Laminar drag reduction in microchannels with liquid infused textured surfaces. Chem Eng Sci 230:116196. https://doi.org/10.1016/j.ces.2020.116196
Karatay E, Haase AS, Visser CW et al (2013) Control of slippage with tunable bubble mattresses. Proc Natl Acad Sci U S A 110:8422–8426. https://doi.org/10.1073/pnas.1304403110
Keinan E, Abraham AC, Cohen A et al (2018) High-Reynolds microfluidic sorting of large yeast populations. Sci Rep 8:1–12. https://doi.org/10.1038/s41598-018-31726-6
Kim JH, Rothstein JP (2017) Role of interface shape on the laminar flow through an array of superhydrophobic pillars. Microfluid Nanofluidics 21:1–12. https://doi.org/10.1007/s10404-017-1914-7
Kim DH, Song J, Won MC et al (2008) Materials and noncoplanar mesh designs for integrated circuits with linear elastic responses to extreme mechanical deformations. Proc Natl Acad Sci USA 105:18675–18680. https://doi.org/10.1073/pnas.0807476105
Lee C, Choi CH, Kim CJ (2016) Superhydrophobic drag reduction in laminar flows: a critical review. Exp Fluids 57:1–20. https://doi.org/10.1007/s00348-016-2264-z
Li Y, Alame K, Mahesh K (2017) Feature-resolved computational and analytical study of laminar drag reduction by superhydrophobic surfaces. Phys Rev Fluids 2:1–19. https://doi.org/10.1103/PhysRevFluids.2.054002
Li P, Xie Y, Zhang D (2016b) Laminar flow and forced convective heat transfer of shear-thinning power-law fluids in dimpled and protruded microchannels. Int J Heat Mass Transf 99:372–382. https://doi.org/10.1016/j.ijheatmasstransfer.2016.04.004
Li C, Zhang S, Xue Q, Ye X (2016a) Simulation of drag reduction in superhydrophobic microchannels based on parabolic gas–liquid interfaces. Phys Fluids. https://doi.org/10.1063/1.4964757
Lin YH, Lee CH, Bin LG (2008) Droplet formation utilizing controllable moving-wall structures for double-emulsion applications. J Microelectromech Syst 17:573–581. https://doi.org/10.1109/JMEMS.2008.924273
Lobaton EJ, Salamon TR (2007) Computation of constant mean curvature surfaces: application to the gas-liquid interface of a pressurized fluid on a superhydrophobic surface. J Colloid Interface Sci 314:184–198. https://doi.org/10.1016/j.jcis.2007.05.059
Londe G, Chunder A, Wesser A et al (2008) Microfluidic valves based on superhydrophobic nanostructures and switchable thermosensitive surface for lab-on-a-chip (LOC) systems. Sens Actuators B Chem 132:431–438. https://doi.org/10.1016/j.snb.2007.10.052
Lu S, Yao Z, Hao P, Fu C (2010) Drag reduction in ultrahydrophobic channels with micro-nano structured surfaces.Sci China Physics. Mech Astron 53:1298–1305. https://doi.org/10.1007/s11433-010-4035-9
Lötters JC, Olthuis W, Veltink PH, Bergveld P (1997) The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications. J Micromech Microeng 7:145–147. https://doi.org/10.1088/0960-1317/7/3/017
Mall A (2011) Numerical characterization of laminar bulk flow over textured surfaces. J Micro/nanolithogr MEMS MOEMS 10:023008. https://doi.org/10.1117/1.3589305
Mata A, Fleischman AJ, Roy S (2005) Characterization of polydimethylsiloxane (PDMS) properties for biomedical micro/nanosystems. Biomed Microdevices 7:281–293. https://doi.org/10.1007/s10544-005-6070-2
Maynes D, Jeffs K, Woolford B, Webb BW (2007) Laminar flow in a microchannel with hydrophobic surface patterned microribs oriented parallel to the flow direction. Phys Fluids. https://doi.org/10.1063/1.2772880
Motamedi M, Chung CY, Rafeie M et al (2019) Experimental testing of hydrophobic microchannels, with andwithout nanofluids, for solar PV/T collectors. Energies. https://doi.org/10.3390/en12153036
Nizkaya TV, Asmolov ES, Harting J, Vinogradova OI (2020) Inertial migration of neutrally buoyant particles in superhydrophobic channels. Phys Rev Fluids 5:14201. https://doi.org/10.1103/PhysRevFluids.5.014201
Ou J, Perot B, Rothstein JP (2004) Laminar drag reduction in microchannels using ultrahydrophobic surfaces. Phys Fluids 16:4635–4643. https://doi.org/10.1063/1.1812011
Ou J, Rothstein JP (2005) Direct velocity measurements of the flow past drag-reducing ultrahydrophobic surfaces. Phys Fluids 17:1–10. https://doi.org/10.1063/1.2109867
Park S, Nam G, Choi Y et al (2018) Mechanoelectrical properties of a GnF/PDMS composite controlled by the aspect ratio and concentration of GnF. Compos Sci Technol 159:77–86. https://doi.org/10.1016/j.compscitech.2018.02.032
Pettas D, Karapetsas G, Dimakopoulos Y, Tsamopoulos J (2022) Stability analysis of a Newtonian film flow over hydrophobic microtextured substrates. Phys Rev Fluids 034004:1–28. https://doi.org/10.1103/PhysRevFluids.7.034004
Quan Y, Zhang LZ (2014) Numerical and analytical study of the impinging and bouncing phenomena of droplets on superhydrophobic surfaces with microtextured structures. Langmuir 30:11640–11649. https://doi.org/10.1021/la502836p
Rabizadeh DS, Abbasalizadeh M (2022) Contradictory behavior of superhydrophobic surfaces: investigation of hydrodynamic behavior. Surf Interfaces 33:102142. https://doi.org/10.1016/j.surfin.2022.102142
Raj MK, DasGupta S, Chakraborty S (2017) Hydrodynamics in deformable microchannels. Microfluid Nanofluidics 21:1–12. https://doi.org/10.1007/s10404-017-1908-5
Raj A, Sen AK (2016) Flow-induced deformation of compliant microchannels and its effect on pressure–flow characteristics. Microfluid Nanofluidics 20:1–13. https://doi.org/10.1007/s10404-016-1702-9
Raj A, Sen AK (2018) Entry and passage behavior of biological cells in a constricted compliant microchannel. RSC Adv 8:20884–20893. https://doi.org/10.1039/c8ra02763c
Ren W, Chen Y, Mu X et al (2018) Heat transfer enhancement and drag reduction in transverse groove-bounded microchannels with offset. Int J Therm Sci 130:240–255. https://doi.org/10.1016/j.ijthermalsci.2018.04.025
Sam Y (2018) Mixing in microchannel patterned with superhydrophobic surfaces. Universiti Sains Malaysia, Penang
Samaha MA, Vahedi Tafreshi H, Gad-el-Hak M (2011) Modeling drag reduction and meniscus stability of superhydrophobic surfaces comprised of random roughness. Phys Fluids. https://doi.org/10.1063/1.3537833
Seghir R, Arscott S (2015) Extended PDMS stiffness range for flexible systems. Sens Actuators A Phys 230:33–39. https://doi.org/10.1016/j.sna.2015.04.011
Shidhore TC, Christov IC (2018) Static response of deformable microchannels: a comparative modelling study. J Phys Condens Matter. https://doi.org/10.1088/1361-648X/aaa226
Singh S, Kumar N, George D, Sen AK (2015) Analytical modeling, simulations and experimental studies of a PZT actuated planar valveless PDMS micropump. Sens Actuators A Phys 225:81–94. https://doi.org/10.1016/j.sna.2015.02.012
Song D, Daniello RJ, Rothstein JP (2014) Drag reduction using superhydrophobic sanded Teflon surfaces. Exp Fluids. https://doi.org/10.1007/s00348-014-1783-8
Stone NE, Raj A, Young KM et al (2021) Label-free microfluidic enrichment of cancer cells from non-cancer cells in ascites. Sci Rep 11:1–9. https://doi.org/10.1038/s41598-021-96862-y
Suresh PV, Jayanti S (2010) Effect of air flow on liquid water transport through a hydrophobic gas diffusion layer of a polymer electrolyte membrane fuel cell. Int J Hydrogen Energy 35:6872–6886. https://doi.org/10.1016/j.ijhydene.2010.04.052
Teo CJ, Khoo BC (2009) Analysis of Stokes flow in microchannels with superhydrophobic surfaces containing a periodic array of micro-grooves. Microfluid Nanofluidics 7:353–382. https://doi.org/10.1007/s10404-008-0387-0
Tsai P, Peters AM, Pirat C et al (2009) Quantifying effective slip length over micropatterned hydrophobic surfaces. Phys Fluids 21:1–8. https://doi.org/10.1063/1.3266505
Wang Z, Wang B, Weng D et al (2021) Influence of entrapped gas morphology at liquid-solid interface on underwater drag reduction effect. Phys Fluids. https://doi.org/10.1063/5.0073041
Ward K, Fan ZH (2015) Mixing in microfluidic devices and enhancement methods. J Micromech Microeng. https://doi.org/10.1088/0960-1317/25/9/094001
Woolford B, Jeffs K, Maynes D, Webb BW (2005) Laminar fully-developed flow in a microchannel with patterned ultraphydrophobic walls. Proc ASME Summer Heat Transf Conf 1:481–488. https://doi.org/10.1115/HT2005-72726
Woolford B, Maynes D, Webb BW (2009) Liquid flow through microchannels with grooved walls under wetting and superhydrophobic conditions. Microfluid Nanofluidics 7:121–135. https://doi.org/10.1007/s10404-008-0365-6
Xiang Y, Huang S, Lv P et al (2017) Ultimate stable underwater superhydrophobic state. Phys Rev Lett 119:1–5. https://doi.org/10.1103/PhysRevLett.119.134501
Xie B, Jin P, Du Y, Liao SJ (2020) A consistent and balanced-force model for incompressible multiphase flows on polyhedral unstructured grids. Int J Multiph Flow 122:103125. https://doi.org/10.1016/j.ijmultiphaseflow.2019.103125
Yang B, Lin Q (2009) A compliance-based microflow stabilizer. J Microelectromech Syst 18:539–546. https://doi.org/10.1109/JMEMS.2009.2021826
Zhao X, Bi L, Khatir B et al (2022) Crosslinking inert liquidlike polydimethylsiloxane brushes using bis-diazirine chemical insertion for enhanced mechanical durability. Chem Eng J 442:136017. https://doi.org/10.1016/j.cej.2022.136017
Acknowledgements
The author A.R. would like to thank the Science and Engineering Research Board (SERB), Department of Science and Technology (DST), Government of India for the financial support under Grant No. SRG/2020/002268. The author A.A. would like to thank the Department of Science and Technology, Government of India, for the financial support under Grant No. DST/INSPIRE/04/2019/001001.
Author information
Authors and Affiliations
Contributions
KA: investigation, methodology, data curation, validation, writing—original draft. AA: supervision, writing—review and editing. AR: conceptualization, supervision, writing—review and editing.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Conflict of interest
The authors have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Amit, K., Assam, A. & Raj, A. Pressure-flow characteristics of a microchannel combining super-hydrophobicity and wall compliance. Microfluid Nanofluid 27, 64 (2023). https://doi.org/10.1007/s10404-023-02672-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10404-023-02672-1