Skip to main content
SpringerLink
Log in

Localized protein immobilization on microstructured polymeric surfaces for diagnostic applications

Microfluidics and Nanofluidics volume 20, Article number: 30 (2016) Cite this article

Abstract

We demonstrate a localized protein immobilization method based on controlled physical adsorption on the three-phase boundary of an aqueous phase, a gas phase, and a polymeric material. By imprinting micrometer and sub-micrometer pillars onto a polymeric foil, superhydrophobic surfaces are fabricated. Those structures force the fluid locally into the Cassie–Baxter state and generate an artificial three-phase boundary at the edges of the imprinted pillars. First, fluorescence-labeled bovine serum albumin (BSA) and streptavidin dissolved in various buffer solutions are utilized to investigate protein adsorption on the structured surfaces. A stable adsorption of the respective protein on the three-phase boundary is observed. The following experiments use streptavidin adsorbed on the pillars to immobilize biotinylated antibodies for analyte detection. The pillars are passivated with an excess concentration of BSA to reduce nonspecific protein adsorption. Implemented in a lab-on-a-chip device, the proposed immobilization method is utilized in a sandwich assay to detect the inflammation marker C-reactive protein in human serum, showing the potential of this immobilization method for diagnostic applications. The method overcomes laborious procedures to immobilize proteins on thermoplastic materials, which enables the fast transfer of point-of-care applications from research to commercial scale.

This is a preview of subscription content, access via your institution.

Access options

Buy single article

Instant access to the full article PDF.

USD 39.95

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

References

  • Ansar W, Ghosh S (2013) C-reactive protein and the biology of disease. Immunol Res 56:131–142. doi:10.1007/s12026-013-8384-0

    Article  Google Scholar 

  • Becker H, Gärtner C (2008) Polymer microfabrication technologies for microfluidic systems. Anal Bioanal Chem 390:89–111. doi:10.1007/s00216-007-1692-2

    Article  Google Scholar 

  • Bernard A, Renault JP, Michel B, Bosshard HR, Delamarche E (2000) Microcontact printing of proteins. Adv Mater 12:1067–1070. doi:10.1002/1521-4095(200007)12:14<1067:aid-adma1067>3.0.co;2-m

    Article  Google Scholar 

  • Bruckbauer A, Zhou DJ, Ying LM, Korchev YE, Abell C, Klenerman D (2003) Multicomponent submicron features of biomolecules created by voltage controlled deposition from a nanopipet. J Am Chem Soc 125:9834–9839. doi:10.1021/ja035755v

    Article  Google Scholar 

  • Cassie ABD, Baxter S (1944) Wettability of porous surfaces. Trans Faraday Soc 40:546–551. doi:10.1039/TF9444000546

    Article  Google Scholar 

  • Chen H, Yuan L, Song W, Wu Z, Li D (2008) Biocompatible polymer materials: role of protein–surface interactions. Prog Polym Sci 33:1059–1087. doi:10.1016/j.progpolymsci.2008.07.006

    Article  Google Scholar 

  • Chłopek J, Czajkowska B, Szaraniec B, Frackowiak E, Szostak K, Béguin F (2006) In vitro studies of carbon nanotubes biocompatibility. Carbon 44:1106–1111. doi:10.1016/j.carbon.2005.11.022

    Article  Google Scholar 

  • Deng Y, Zhu XY, Kienlen T, Guo A (2006) Transport at the air/water interface is the reason for rings in protein microarrays. J Am Chem Soc 128:2768–2769. doi:10.1021/ja057669w

    Article  Google Scholar 

  • Dörner K (2009) Klinische Chemie und Hämatologie, 7th edn. Thieme, Stuttgart

    Google Scholar 

  • Duffy DC, McDonald JC, Schueller OJA, Whitesides GM (1998) Rapid prototyping of microfluidic systems in poly(dimethylsiloxane). Anal Chem 70:4974–4984. doi:10.1021/ac980656z

    Article  Google Scholar 

  • Gao D, Lin D-Q, Yao S-J (2007) Mechanistic analysis on the effects of salt concentration and pH on protein adsorption onto a mixed-mode adsorbent with cation ligand. J Chromatogr B 859:16–23. doi:10.1016/j.jchromb.2007.08.044

    Article  Google Scholar 

  • Halldorsson S, Lucumi E, Gomez-Sjoeberg R, Fleming RMT (2015) Advantages and challenges of microfluidic cell culture in polydimethylsiloxane devices. Biosens Bioelectron 63:218–231. doi:10.1016/j.bios.2014.07.029

    Article  Google Scholar 

  • Heckele M, Bacher W, Muller KD (1998) Hot embossing—the molding technique for plastic microstructures. Microsyst Technol 4:122–124. doi:10.1007/s005420050112

    Article  Google Scholar 

  • Holden MA, Cremer PS (2003) Light activated patterning of dye-labeled molecules on surfaces. J Am Chem Soc 125:8074–8075. doi:10.1021/ja035390e

    Article  Google Scholar 

  • Jena RK, Chester SA, Srivastava V, Yue CY, Anand L, Lam YC (2011) Large-strain thermo-mechanical behavior of cyclic olefin copolymers: application to hot embossing and thermal bonding for the fabrication of microfluidic devices. Sens Actuators B Chem 155:93–105. doi:10.1016/j.snb.2010.11.031

    Article  Google Scholar 

  • Jeon JS, Chung S, Kamm RD, Charest JL (2011) Hot embossing for fabrication of a microfluidic 3D cell culture platform. Biomed Microdevices 13:325–333. doi:10.1007/s10544-010-9496-0

    Article  Google Scholar 

  • Kashaninejad N, Chan WK, Nam-Trung N (2012) Eccentricity effect of micropatterned surface on contact angle. Langmuir 28:4793–4799. doi:10.1021/la300416x

    Article  Google Scholar 

  • Khang G, Lee HB, Park JB (1995) Biocompatibility of polysulfone 1. Surface modifications and characterizations. Bio-Med Mater Eng 5:245–258

    Google Scholar 

  • Kim E, Xia Y, Whitesides GM (1995) Polymer microstructures formed by moulding in capillaries. Nature 376:581–584

    Article  Google Scholar 

  • McDonald JC, Whitesides GM (2002) Poly(dimethylsiloxane) as a material for fabricating microfluidic devices. Acc Chem Res 35:491–499. doi:10.1021/ar010110q

    Article  Google Scholar 

  • Meyers L, Frawley T, Goss S, Kang C (2015) Ebola virus outbreak 2014: clinical review for emergency physicians. Ann Emerg Med 65:101–108. doi:10.1016/j.annemergmed.2014.10.009

    Article  Google Scholar 

  • Norde W, Lyklema J (1991) Why proteins prefer interfaces. J Biomater Sci Polym Ed 2:183–202

    Article  Google Scholar 

  • Osborne L, Knight R, Santis G, Hodson M (1991) A mutation in the 2nd nucleotide binding fold of the cystic-fibrosis gene. Am J Hum Genet 48:608–612

    Google Scholar 

  • Ostuni E, Chen CS, Ingber DE, Whitesides GM (2001) Selective deposition of proteins and cells in arrays of microwells. Langmuir 17:2828–2834. doi:10.1021/la001372o

    Article  Google Scholar 

  • Patankar NA (2003) On the modeling of hydrophobic contact angles on rough surfaces. Langmuir 19:1249–1253. doi:10.1021/la026612+

    Article  Google Scholar 

  • Shirtcliffe NJ, Aqil S, Evans C, McHale G, Newton MI, Perry CC, Roach P (2004) The use of high aspect ratio photoresist (SU-8) for super-hydrophobic pattern prototyping. J Micromech Microeng 14:1384–1389. doi:10.1088/0960-1317/14/10/013

    Article  Google Scholar 

  • Shirtcliffe NJ, McHale G, Atherton S, Newton MI (2010) An introduction to superhydrophobicity. Adv Colloid Interface Sci 161:124–138. doi:10.1016/j.cis.2009.11.001

    Article  Google Scholar 

  • Song H-M, Lee C-S (2008) Simple fabrication of functionalized surface with polyethylene glycol microstructure and glycidyl methacrylate moiety for the selective immobilization of proteins and cells. Korean J Chem Eng 25:1467–1472

    Article  Google Scholar 

  • Steidle NE, Schneider M, Ahrens R, Worgull M, Guber AE (2013) Fabrication of polymeric microfluidic devices with tunable wetting behavior for biomedical applications. In: Conference proceedings: annual international conference of the IEEE Engineering in Medicine and Biology Society IEEE Engineering in Medicine and Biology Society Annual Conference 2013, pp 6659–6662. doi:10.1109/embc.2013.6611083

  • Suh KY, Seong J, Khademhosseini A, Laibinis PE, Langer R (2004) A simple soft lithographic route to fabrication of poly(ethylene glycol) microstructures for protein and cell patterning. Biomaterials 25:557–563. doi:10.1016/s0142-9612(03)00543-x

    Article  Google Scholar 

  • Waldbaur A, Rapp H, Länge K, Rapp BE (2011) Let there be chip-towards rapid prototyping of microfluidic devices: one-step manufacturing processes. Anal Methods 3:2681–2716. doi:10.1039/c1ay05253e

    Article  Google Scholar 

  • Waldbaur A, Waterkotte B, Schmitz K, Rapp BE (2012) Maskless projection lithography for the fast and flexible generation of grayscale protein patterns. Small 8:1570–1578. doi:10.1002/smll.201102163

    Article  Google Scholar 

  • Worgull M (2009) Hot embossing: theory and technology of microreplication. Micro and nano technologies. William Andrew Publishing, Boston

    Google Scholar 

Download references

Acknowledgments

The authors would like to thank T. Robinson for capturing the laser scanning microscopy images. Thanks go to P. Abaffy and G. Papagno for capturing the SEM micrographs and L. Zimmermann and M. Röhrig for supplying the hot embossing mold inserts. N. Steidle would like to thank E. Rubiu and P. Tritschler for their help preparing the samples. This work is supported by the Bürkert Technology Center (BTC), a cooperation between Bürkert Werke GmbH & Co. KG and the Institute of Microstructure Technology (IMT) at the Karlsruhe Institute of Technology (KIT). This work was carried out with the support of the Karlsruhe Nano Micro Facility (KNMF), a Helmholtz Research Infrastructure at KIT.

Author information

Authors and Affiliations

  1. Institute of Microstructure Technology (IMT), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344, Eggenstein-Leopoldshafen, Germany

    Nicole E. Steidle, Christian Bader, Ralf Ahrens, Bastian E. Rapp, Andreas E. Guber & Kerstin Länge

  2. Bürkert Werke GmbH & Co. KG, Christian-Bürkert-Str. 13-17, 74653, Ingelfingen, Germany

    Thomas Hahn

Authors
  1. Nicole E. Steidle
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Thomas Hahn
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Christian Bader
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Ralf Ahrens
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Bastian E. Rapp
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Andreas E. Guber
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Kerstin Länge
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Kerstin Länge.

Rights and permissions

Reprints and Permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Steidle, N.E., Hahn, T., Bader, C. et al. Localized protein immobilization on microstructured polymeric surfaces for diagnostic applications. Microfluid Nanofluid 20, 30 (2016). https://doi.org/10.1007/s10404-015-1696-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10404-015-1696-8

Keywords

search

Navigation