Abstract
Nanoparticles can be prepared through nanoprecipitation by mixing polymers dissolved in organic solvents with anti-solvents. However, due to the inability to precisely control the mixing processes during the synthesis of polymeric nanoparticles, its application is limited by a lack of homogeneous physicochemical properties. Here, we report that this obstacle can be overcome through rapid and controlled mixing by parallel flow focusing outside the microfluidic channels. Using the nanoprecipitation of methoxyl poly-(ethylene glycol)–poly-(lactic-co-glycolic acid) (MPEG–PLGA) block copolymers as an example, we prove that our parallel flow focusing method is a robust and predictable approach to synthesize highly monodisperse polymeric nanoparticles, and demonstrate that it improves the production speed of nanoparticles by an order of magnitude or more compared with previous microfluidic systems. Possible aggregation on the surface of PDMS wall and clogging of microchannels reported previously were avoided in the synthesis process of our method. This work is a typical application combining the advantages of microfluidics with nanoparticle technologies, suggesting that microfluidics may find applications in the development and mass production of polymeric nanoparticles with high monodispersity in large-scale industrial production field.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Chan EM, Alivisatos AP et al (2005) High-temperature microfluidic synthesis of CdSe nanocrystals in nanoliter droplets. J Am Chem Soc 127(40):13854–13861
Davaran S, Rashidi MR et al (2006) Adriamycin release from poly(lactide-co-glycolide)-polyethylene glycol nanoparticles: synthesis, and in vitro characterization. Int J Nanomed 1(4):535–539
Davis ME, Chen Z et al (2008) Nanoparticle therapeutics: an emerging treatment modality for cancer. Nat Rev Drug Discov 7(9):771–782
deMello AJ (2006) Control and detection of chemical reactions in microfluidic systems. Nature 442(7101):394–402
deMello J, deMello A (2004) Microscale reactors: nanoscale products. Lab Chip 4(2):11N–15N
Farokhzad OC, Langer R (2009) Impact of nanotechnology on drug delivery. ACS Nano 3(1):16–20
Farokhzad OC, Jon SY et al (2004) Nanoparticle–aptamer bioconjugates: a new approach for targeting prostate cancer cells. Cancer Res 64(21):7668–7672
Farokhzad OC, Cheng JJ et al (2006) Targeted nanoparticle–aptamer bioconjugates for cancer chemotherapy in vivo. Proc Natl Acad Sci USA 103(16):6315–6320
Gref R, Minamitake Y et al (1994) Biodegradable long-circulating polymeric nanospheres. Science 263(5153):1600–1603
Gu F, Zhang L et al (2008) Precise engineering of targeted nanoparticles by using self-assembled biointegrated block copolymers. Proc Natl Acad Sci USA 105(7):2586–2591
Huang S-H, Tan W-H et al (2006) A monolithically three-dimensional flow-focusing device for formation of single/double emulsions in closed/open microfluidic systems. J Micromech Microeng 16(11):2336–2344
Jahn A, Stavis SM et al (2010) Microfluidic mixing and the formation of nanoscale lipid vesicles. ACS Nano 4(4):2077–2087
Johnson BK, Prud’homme RK (2003) Mechanism for rapid self-assembly of block copolymer nanoparticles. Phys Rev Lett 91(11):118302 (Epub 2003 Sep 11)
Karnik R, Gu F et al (2008) Microfluidic platform for controlled synthesis of polymeric nanoparticles. Nano Lett 8(9):2906–2912
Krishnadasan S, Brown RJC et al (2007) Intelligent routes to the controlled synthesis of nanoparticles. Lab Chip 7(11):1434–1441
Lim J-M, Kim S-H et al (2011) Liquid-liquid fluorescent waveguides using microfluidic-drifting-induced hydrodynamic focusing. Microfluid Nanofluid 10(1):211–217
Lo CT, Jahn A et al (2010) Controlled self-assembly of monodisperse niosomes by microfluidic hydrodynamic focusing. Langmuir 26(11):8559–8566
Mao X, Waldeisen JR et al (2007) “Microfluidic drifting”—implementing three-dimensional hydrodynamic focusing with a single-layer planar microfluidic device. Lab Chip 7(10):1260–1262
Peer D, Karp JM et al (2007) Nanocarriers as an emerging platform for cancer therapy. Nat Nanotechnol 2(12):751–760
Quintanar-Guerrero D, Allemann E et al (1998) Preparation techniques and mechanisms of formation of biodegradable nanoparticles from preformed polymers. Drug Dev Ind Pharm 24(12):1113–1128
Rhee M, Valencia PM et al (2011) Synthesis of size-tunable polymeric nanoparticles enabled by 3D hydrodynamic flow focusing in single-layer microchannels. Adv Mater 23(12):H79–H83
Riehemann K, Schneider SW et al (2009) Nanomedicine—challenge and perspectives. Angew Chem (Int Ed 48(5):872–897
Scott R, Sethu P et al (2008) Three-dimensional hydrodynamic focusing in a microfluidic Coulter counter. Rev Sci Instrum 79(4)
Shestopalov I, Tice JD et al (2004) Multi-step synthesis of nanoparticles performed on millisecond time scale in a microfluidic droplet-based system. Lab Chip 4(4):316–321
Soppimath KS, Aminabhavi TM et al (2001) Biodegradable polymeric nanoparticles as drug delivery devices. J Control Release 70(1–2):1–20
Valencia PM, Basto PA et al (2010) Single-step assembly of homogenous lipid–polymeric and lipid–quantum dot nanoparticles enabled by microfluidic rapid mixing. ACS Nano 4(3):1671–1679
Wagner J, Kohler JM (2005) Continuous synthesis of gold nanoparticles in a microreactor. Nano Lett 5(4):685–691
Wolff A, Perch-Nielsen IR et al (2003) Integrating advanced functionality in a microfabricated high-throughput fluorescent-activated cell sorter. Lab Chip 3(1):22–27
Wong I, Ho C-M (2009) Surface molecular property modifications for poly(dimethylsiloxane) (PDMS) based microfluidic devices. Microfluid Nanofluid 7(3):291–306
Wu DP, Luo Y et al (2005) Multilayer poly(vinyl alcohol)-adsorbed coating on poly(dimethylsiloxane) microfluidic chips for biopolymer separation. Electrophoresis 26(1):211–218
Xu S, Nie Z et al (2005) Generation of monodisperse particles by using microfluidics: control over size, shape, and composition. Angew Chem Int Ed 44(25):724–728
Zhang H, Tumarkin E et al (2007) Exploring microfluidic routes to microgels of biological polymers. Macromol Rapid Commun 28(5):527–538
Acknowledgments
We would like to thank W.K. Wang, X.J. Zhu, G.W. Si, Y.G. Wang for helpful discussions. This work is partially supported by the NSF of China (10721403, 11074009, 11174012), the MOST of China (2009CB918500) and the NFFTBS of China (J0630311).
Author information
Authors and Affiliations
Corresponding authors
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Kang, X., Luo, C., Wei, Q. et al. Mass production of highly monodisperse polymeric nanoparticles by parallel flow focusing system. Microfluid Nanofluid 15, 337–345 (2013). https://doi.org/10.1007/s10404-013-1152-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10404-013-1152-6