Abstract
A mixing device based on the split-and-recombine (SAR) principle is characterized using both theoretical and experimental methods. The theoretical model relies on solving a 1D diffusion equation in a frame of reference comoving with the flow, thus avoiding the usual numerical artefacts related to the prediction of high-Péclet number mixing. It accounts both for the hydrodynamic focusing of the flow inside the mixing channel and the nontrivial flow topology. The experimental technique used for quantifying the degree of mixing utilizes two initially transparent salt solutions that form a colored compound in a fast chemical reaction. The degree of mixing is derived from the average color saturation found at specific positions along the mixing channel. The data obtained from the theoretical model are in reasonable agreement with the experiments and underline the excellent performance of the SAR mixer, with a mixing length growing only logarithmically as a function of Péclet number.
This is a preview of subscription content, access via your institution.










References
Auroux PA, Iossifidis D, Reyes DR, Manz A (2002) Micro total analysis systems. 2. analytical standard operations and applications. Anal Chem 74:2637–2652
Boris JP, Book DL (1973) Flux-corrected transport—I. SHASTA a fluid transport algorithm that works. J Comput Phys 11:38–69
Ehrfeld W, Hessel V, Löwe H (2000) Microreactors. Wiley-VCH, Weinheim
Fletcher CAJ (1991) Computational techniques for fluid dynamics. Springer, Berlin Heidelberg New York
Gobby D, Angeli P, Gavrilidis A (2001) Mixing characteristics of T-type microfluidic mixers. J Micromech Microeng 11:126–132
Hardt S, Schönfeld F (2003) Laminar mixing in different interdigital micromixers: II. Numerical simulations. AIChE J 49:578–584
Hardt S, Drese KS, Hessel V, Schönfeld F (2004) Passive micro mixers for applications in the micro reactor and μTAS field. Microfluid Nanofluid (in press)
Hessel V, Hardt S, Löwe H, Schönfeld F (2003) Laminar mixing in different interdigital micromixers: I. Experimental characterization. AIChE J 49:566–577
Hessel V, Hardt S, Löwe H (2004) Chemical micro process engineering. Fundamentals, modeling and reactions. Wiley-VCH, Weinheim
Jen CP, Wu CY, Lin YC, Wu CY (2003) Design and simulation of the micromixer with chaotic advection in twisted microchannels. Lab Chip 3:77–81
Jiang F, Drese KS, Hardt S, Küpper M, Schönfeld F (2004) Helical flows and chaotic mixing in curved micro channels. AIChE J 50: 2297–2305
Kim DS, Lee IH, Kwon TH, Cho DW (2004) A barrier embedded Kenics micromixer. J Micromech Microeng 14:1294–1301
Knight JB, Vishwanath A, Brody JP, Austin RH (1998) Hydrodynamic focussing on a silicon chip: mixing nanoliters in microseconds. Phys Rev Lett 80:3863–3866
Neils C, Tyree Z, Finlayson B, Folch A (2004) Combinatorial mixing of microfluidic streams. Lab Chip 4:342–350
Landau LD, Lifshitz EM (1987) Fluid mechanics, 2nd edn. Butterworth Heinemann, Oxford
Lide DR (ed) (1998) CRC handbook of chemistry and physics, 79th edn. CRC Press, Boca Raton
Melin J, Giménez G, Roxhed N, van der Wijngaart W, Stemme G (2004) A fast passive and planar liquid sample micromixer. Lab Chip 4:214–219
Press WA, Vetterling WT, Teukolsky SA, Flannery BP (1992) Numerical recipes in Fortran 77, 2nd edn. Cambridge University Press, Cambridge
Reyes DR, Iossifidis D, Auroux PA, Manz A (2002) Micro total analysis systems. 1. introduction, theory, and technology. Anal Chem 74:2623–2636
Schönfeld F, Hessel V, Hofmann C (2004) An optimised split-and-recombine micro mixer with uniform “chaotic” mixing. Lab Chip 4:65–69
Schwesinger N, Frank T, Wurmus H (1996) A modular microfluid system with an integrated micromixer, J Micromech Microeng 6:99–102
Stroock AD, Dertinger SKW, Ajdari A, Mezić I, Stone HA, Whitesides GM (2002) Chaotic mixer for microchannnels. Science 295:647–651
Trimm HH, Ushio H, Patel RC (1981) Simultaneous determination of kinetic and thermodynamic parameters from fast-reaction kinetic measurements. Talanta 28:753–757
Veenstra TT, Lammerink TSJ, Elwenspoek MC, van den Berg A (1998) Characterization method for a new diffusion mixer applicable in micro flow injection analysis systems. J Micromech Microeng 9:199–202
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hardt, S., Pennemann, H. & Schönfeld, F. Theoretical and experimental characterization of a low-Reynolds number split-and-recombine mixer. Microfluid Nanofluid 2, 237–248 (2006). https://doi.org/10.1007/s10404-005-0071-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10404-005-0071-6
Keywords
- Micromixer
- Mixing model
- Mixing characterization