Skip to main content

Slope inclinometers for landslides

Abstract

Slope inclinometers/indicators are used to determine the magnitude, rate, direction, depth, and type of landslide movement. This information is usually vitally important for understanding the cause, behavior, and remediation of a landslide. However, many inclinometer measurements fail to achieve these intended aims because of lack of appreciation of the many factors that need to be correctly implemented during installation, monitoring, and data reduction to yield useful data. This paper presents some guidelines for understanding, installing, and interpreting slope inclinometers and presents three case histories that illustrate some of the pitfalls that can develop if these guidelines are not followed.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

References

  • Abramson LW, Lee TS, Sharma S, Boyce GM (2002) Slope stability and stabilization methods, 2nd edn. Wiley, New York

    Google Scholar 

  • ASTM D 7299 (2007) Practice for verifying performance of a vertical inclinometer probe

  • Cornforth DH (2005) Landslides in practice: investigation, analysis, and remedial/preventative options in soils. Wiley, New York

    Google Scholar 

  • Dunnicliff J (1988) Geotechnical instrumentation for monitoring field performance. Wiley, New York

    Google Scholar 

  • Green GE, Mikkelsen PE (1986) Measurement of ground movement with inclinometers. Proceedings of Fourth International Geotechnical Seminar on Field Instrumentation and In-Situ Measurement, Singapore, pp 235–246

  • Green GE, Mikkelsen PE (1988) Deformation measurements with inclinometers. Transportation Research Record 1169. Transportation Research Board, Washington, pp 1–15

    Google Scholar 

  • Mikkelsen PE (1996) Field instrumentation. In: Turner AK, Schuster RL (eds) Landslides investigation and mitigation, Special Report 247. Transportation Research Board, National Research Council, Washington, pp 278–316

    Google Scholar 

  • Mikkelsen PE (2002) Cement–bentonite grout backfill for borehole instruments. Geotech News 20(4):38–42

    Google Scholar 

  • Mikkelsen PE (2003) Advances in inclinometer data analysis. Symposium on Field Measurements in Geomechanics, FMGM 2003, Oslo, 13 pp

  • Mikkelsen PE, Green GE (2003) Piezometers in fully grouted boreholes. Symposium on Field Measurements in Geomechanics, FMGM 2003, Oslo, 10 pp

  • Richardson TM (2002) On the validity of slope inclinometer data. WV DOH Project No. RP 156 Final Report, West Virginia Department of Transportation, Division of Highway

  • Skempton AW (1985) Residual strength of clays in landslides, folded strata and the laboratory. Geotechnique 35(1):3–18

    Article  Google Scholar 

  • Slope Indicator (2005) Citing online sources: advice on online citation formats [online]. http://www.slopeindicator.com

  • Stark TD, Choi H, McCone, S (2005) Drained shear strength parameters for analysis of landslides. J Geotech Geoenviron Eng, ASCE 131(5):575–588

    Article  Google Scholar 

  • Terzaghi K, Peck RB (1967) Soil mechanics in engineering practice, 2nd edn. Wiley, New York

    Google Scholar 

Download references

Acknowledgment

The contents and views in this paper are the authors’ and do not necessarily reflect those of any of the developers, homeowners, consultants, or anyone else involved in the case histories.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Hangseok Choi.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Stark, T.D., Choi, H. Slope inclinometers for landslides. Landslides 5, 339 (2008). https://doi.org/10.1007/s10346-008-0126-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10346-008-0126-3

Keywords

  • Slope stability
  • Instrumentation
  • Landslides
  • Slope inclinometer
  • Failure plane