Mapping Microscale Strain Fields Around a Crack Tip in Molybdenum Via Geometric Phase Analysis and Digital Image Correlation
- 79 Downloads
Uniaxial tension tests were conducted on single-edge-notched tensile specimens of pure molybdenum with a mesh grid pattern in front of the notch. A series of images of crack initialization and propagation with a distorted mesh grid pattern were obtained by means of in situ scanning electron microscopy. Strain fields around the crack tip were mapped successively using geometric phase analysis and digital image correlation techniques, and then compared with the predictions obtained through linear elastic fracture mechanics (LEFM). The comparison shows that the measured strain distribution ahead of the crack tip is consistent with the LEFM predictions of up to 25 \(\upmu \)m from the crack tip.
KeywordsCrack Strain field Geometric phase analysis Digital image correlation
This work was supported by the National Natural Science Foundation of China (Grant Nos. 11562016 and 11672175).
- 8.Shah M, Mabru C, Rezai-Aria F, Souki I, Pasha RA. An estimation of stress intensity factor in a clamped SE(T) specimen through numerical simulation and experimental verification: case of FCGR of AISI H11 tool steel. Acta Metall Sin (Engl Lett). 2012;25:307–19.Google Scholar
- 22.Murakami Y. Stress intensity factors handbook. Japan: Pergamon Press; 1987.Google Scholar