Skip to main content
Log in

Sorption and transformation of biocides from hydraulic fracturing in the Marcellus Shale: a review

  • Review
  • Published:
Environmental Chemistry Letters Aims and scope Submit manuscript

Abstract

Biocides are applied as chemical additives in hydraulic fracturing fluids to control subsurface microbial activity. When biocides are released into the subsurface, their fate is controlled by sorption to solids and heterogeneous electron transfer (redox) reactions at the mineral–fluid interface. The ability to predict whether produced water may contain unreacted biocides, or biocide–mineral transformation products, is relevant for defining optimal produced water treatment and beneficial use approaches. This article reviews major minerals that may impact biocide sorption and reactivity in the Marcellus Shale, with a specific focus on biocide–mineral interactions. The chemical and physical properties of quartz, illite, chlorite, pyrite, calcite and dolomite are presented and their reactions with organic compounds structurally similar to biocides are identified. Oxygen-containing functional groups are common among organic biocides, where the carbonyl (–C=O) substructure is integrated into many biocides. Cationic surfactant biocides are expected to sorb to every mineral. Clays, because of their negative surface charge and comparatively high surface area, make excellent sorbents of positively charged biocides. Sorption to organic matter is expected to be limited due to the very polar groups found in biocides. Pyrite is most likely to cause transformation of biocides due to its ability to reduce halogenated organic compounds and initiate Fenton-like reactions, which generate non-specific hydroxyl radicals that react with biocides. Carbonate minerals may act as potential chemisorption sites for biocides possessing a carbonyl group adjacent to another electronegative group. However, the rapid dissolution of this mineral limits its persistence at the mineral–fluid interface. These potential sorption versus transformation reactions can be applied to predict biocide fate in unconventional oil and gas reservoirs and, where appropriate, other subsurface reservoirs used for energy resource extraction or storage.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

Download references

Acknowledgements

This work was supported by the National Energy Technology Laboratory’s Regional University Alliance (NETL-RUA) [RES contract DE FE0004000]; the Oak Ridge Associated Universities (ORAU) Oak Ridge Institute for Science and Education (ORISE); and the Carnegie Mellon University (CMU) Scott Institute ProSEED/EQT Energy Seed Grant (2016).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Athanasios K. Karamalidis.

Ethics declarations

Conflict of interest

The authors declare no competing financial interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Consolazio, N., Hakala, J.A., Lowry, G.V. et al. Sorption and transformation of biocides from hydraulic fracturing in the Marcellus Shale: a review. Environ Chem Lett 20, 773–795 (2022). https://doi.org/10.1007/s10311-021-01352-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10311-021-01352-2

Keywords

Navigation