Advertisement

GPS Solutions

, 22:34 | Cite as

Precise point positioning for ground-based navigation systems without accurate time synchronization

  • Xiye Guo
  • Yongbin Zhou
  • Jinling Wang
  • Kai Liu
  • Changshui Liu
Original Article

Abstract

Despite the broad range of navigation, positioning, and timing services offered by the global navigation satellite system (GNSS), its signals are vulnerable to blockage and interference, leading to a degraded performance or even unavailability. In contrast to GNSS, ground-based navigation systems exhibit better layout flexibility and more efficient terrain adaptability in shaded areas, with their additional advantages of accurate station coordinates and the absence of ionospheric delay effects enabling precise point positioning. However, accurate inter-station time synchronization is thought to be necessary for the ground-based precise point positioning. Locata utilizes a proprietary TimeLoc technology for tight time synchronization, allowing the clock difference in the carrier phase measurement equation to be ignored. However, for other ground-based navigation systems, accurate time synchronization requires accurate calibration of equipment delays and thus significantly increases the difficulty of engineering implementation. Herein, we propose a new precise point positioning method that does not rely on accurate inter-station time synchronization. According to this method, the uncalibrated clock difference and the integer carrier phase ambiguity are combined into a new ambiguity parameter, with the ambiguity and position coordinates subsequently solved in two steps. Further, in order to overcome the limitations of the Locata on-the-fly algorithm and the conventional “known-point initialization” method, a new “dynamic key point initialization” method is proposed. Finally, a simulation test and an indoor field trial are conducted, demonstrating that precise point positioning can be achieved by sharing a single clock source without relying on accurate inter-station time synchronization. An atomic clock is not needed and an inexpensive crystal oscillator is sufficient to act as the shared clock. The results of indoor positioning tests reveal real-time centimeter-level accuracy.

Keywords

Ground-based navigation Precise point positioning Real-time Centimeter-level 

References

  1. Amt JHR, Raquet JF (2007) Flight testing of a pseudolite navigation system on a UAV. In: Proceedings of ION-NTM-2007, Institute of Navigation, San Diego, California, USA, 22–24 Jan, pp 1147–1154Google Scholar
  2. Barnes J, Rizos C, Wang J, Small D, Voigt G, Gambale N (2003a) Locata: the positioning technology of the future. In: Proceedings of the 6th international symposium on satellite navigation technology including mobile positioning and location services, Melbourne, Australia, 22–25 July, CD-ROM proceeding paper 49Google Scholar
  3. Barnes J, Rizos C, Wang J, Small D, Voigt G, Gambale N (2003b) Locata: a new positioning technology for high precision indoor and outdoor positioning. In: Proceedings of ION-GPS/GNSS-2003, Institute of Navigation, Portland, Oregon, USA, 9–12 Sept, pp 1119–1128Google Scholar
  4. Barnes J, Rizos C, Wang J, Small D, Voigt G, Gambale N (2003c) High precision indoor and outdoor positioning using LocataNet. J Glob Position Syst 2(2):73–82CrossRefGoogle Scholar
  5. Barnes J, Rizos C, Kanli M, Pahwa A (2006) A positioning technology for classically difficult GNSS environments from Locata. In: Proceedings of IEEE/ION PLANS 2006, San Diego, California, USA, 25–27 Apr, pp 715–721Google Scholar
  6. Barnes J, LaMance J, Lilly B, Rogers I, Nix M, Balls A (2007) An integrated Locata and Leica Geosystems positioning system for open-cut mining applications. In: Proceedings of ION-GNSS-2007, Institute of Navigation, Fort Worth, Texas, USA, 25–28 Sept, pp 1661–1668Google Scholar
  7. Bertsch J, Choudhury M, Rizos C, Kahle H-G (2009) On-the-fly ambiguity resolution for Locata. In: International symposium on GPS/GNSS, Gold Coast, Australia, 1–3 Dec, CD-ROM procsGoogle Scholar
  8. Choudhury M, Harvey BR, Rizos C (2009) Tropospheric correction for Locata when known point ambiguity resolution technique is used in static survey—is it required? In: Proceedings of the international symposium on GPS/GNSS, Gold Coast, Australia, 1–3 Dec, CD-ROM procsGoogle Scholar
  9. Gauthier JP, Glennon EP, Rizos C, Dempster AG (2013) Time transfer performance of Locata–initial results. In: Proceedings of the 45th annual precise time and time interval system and application meeting, Bellevue, Washington, 2–5 Dec, pp 155–157Google Scholar
  10. Geng J, Teferle FN, Meng X, Dodson AH (2011) Towards PPP-RTK: ambiguity resolution in real-time precise point positioning. Adv Space Res 47(10):1664–1673CrossRefGoogle Scholar
  11. Jiang W, Li Y, Rizos C (2013) On-the-fly Locata/inertial navigation system integration for precise maritime application. Meas Sci Technol 24(10):105104CrossRefGoogle Scholar
  12. Jiang W, Li Y, Rizos C (2014) On-the-fly indoor positioning and attitude determination Using terrestrial ranging signals. In: Proceedings of ION-GNSS-2014, Institute of Navigation, Tampa, Florida, USA, 8–12 Sept, pp 3222–3230Google Scholar
  13. Jiang W, Li Y, Rizos C (2015) Locata-based precise point positioning for kinematic maritime applications. GPS Solut 19(1):117–128CrossRefGoogle Scholar
  14. Jiang W, Li Y, Rizos C, Cai B, Wei S (2017) Seamless indoor–outdoor navigation based on GNSS, INS and terrestrial ranging techniques. J Navig 70(6):1–22CrossRefGoogle Scholar
  15. Kaplan ED (2005) Understanding GPS: principles and applications. Artech House, NorwoodGoogle Scholar
  16. Kleusberg A, Teunissen PJG (1996) GPS for Geodesy. Springer, Berlin, pp 210–216CrossRefGoogle Scholar
  17. Lee JE, Lee S (2010) Indoor initial positioning using single clock pseudolite system. In: Information and communication technology convergence (ICTC), Jeju, Korea, 17–19 Nov, pp 575–578Google Scholar
  18. Li X, Ge M, Zhang H, Wickert J (2013) A method for improving uncalibrated phase delay estimation and ambiguity-fixing in real-time precise point positioning. J Geod 87(5):405–416CrossRefGoogle Scholar
  19. Misra P, Enge P (2006) Global positioning system: signals, measurements and performance, 2nd edn. Ganga-Jamuna Press, Lincoln, p 242Google Scholar
  20. Montillet JP, Roberts GW, Hancock C, Meng X, Ogundipe O (2009) Deploying a Locata network to enable precise positioning in urban canyons. J Geod 83(2):91–103CrossRefGoogle Scholar
  21. Phelts RE, Enge P (2000) The multipath invariance approach for code multipath mitigation. In: Proceedings of ION-GPS-2000, Institute of Navigation, Salt Lake City, Utah, USA, 19–22 Sept, pp 2376–2384Google Scholar
  22. Plumb J, Larson KM, White J, Powers E (2005) Absolute calibration of a geodetic time transfer system. IEEE Trans Ultrason Ferroelectr Freq Control 52(11):1904–1911CrossRefGoogle Scholar
  23. Powers E, Colina A (2016) Wide area wireless network synchronization using Locata. In: Proceedings of the 47th annual precise time and time interval systems and applications meeting, Monterey, California, 25–28 Jan, pp 90–98Google Scholar
  24. Proia A, Cibiel G, White J, Wilson D, Senior K (2011) Absolute calibration of GNSS time transfer systems: NRL and CNES techniques comparison. In: IEEE international conference on frequency control and the European frequency and time forum (FCS), San Francisco, CA, USA, 2–5 May, pp 1–6Google Scholar
  25. Puengnim A, Patino-Studencka L, Thielecke J, Rohmer G (2013) Precise positioning for virtually synchronized pseudolite system. In: IEEE international conference on indoor positioning and indoor navigation (IPIN), Montbéliard, France, 28–31 Oct, pp 1–8Google Scholar
  26. Rizos C, Roberts G, Barnes J, Gambale N (2010) Experimental results of Locata: a high accuracy indoor positioning system. In: IEEE international conference on indoor positioning and indoor navigation (IPIN), Zürich, Switzerland, 15–17 Sept, pp 1–7Google Scholar
  27. Seo S, Park J, Suk J, Song K (2014) A design of dual frequency bands time synchronization system for synchronized-pseudolite navigation system. J Position Navig Timing 3(2):71–81CrossRefGoogle Scholar
  28. Stone JM, LeMaster EA, Powell JD, Rock S (1999) GPS pseudolite transceivers and their applications. In: Proceedings of ION-NTM-1999, Institute of Navigation, San Diego, California, USA, 25–27 Jan, pp 415–424Google Scholar
  29. Teunissen PJG, Khodabandeh A (2015) Review and principles of PPP-RTK methods. J Geod 89(3):217–240CrossRefGoogle Scholar
  30. Thölert S, Grunert U, Denks H, Furthner J (2007) Absolute calibration of time receivers with DLR’s GPS/Galileo HW simulator. In: Proceedings of the 39th annual precise time and time interval (PTTI) Meeting, Long Beach, California, USA, 27–29 Nov, pp 323–330Google Scholar
  31. Wang J (2002) Applications of pseudolites in geodetic positioning: progress and problems. J Glob Position Syst 1(1):48–56CrossRefGoogle Scholar
  32. Wang L, Groves PD, Ziebart MK (2013) GNSS shadow matching: improving urban positioning accuracy using a 3D city model with optimized visibility scoring scheme. Navigation 60(3):195–207CrossRefGoogle Scholar
  33. Xiang C, Bao S (2013) Research on BeiDou positioning performance in urban environments. In: Proceedings international conference on of signal processing, communication and computing (ICSPCC), KunMing, China, 5–8 Aug, pp 1–5Google Scholar
  34. Zhang Y, Wang Q, Jiang X (2017) Property analysis of the real-time uncalibrated phase delay product generated by regional reference stations and its influence on precise point positioning ambiguity resolution. Sensors 17(5):1162–1176CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.College of Mechatronics Engineering and AutomationNational University of Defense TechnologyChangshaChina
  2. 2.School of Civil and Environmental EngineeringUniversity of New South WalesSydneyAustralia

Personalised recommendations