Abstract
The goal of the inclined conveyor method for particle shape separation is to process a large amount of feed material for recycling technology. The high feed rate has been achieved because the movement of particles is faster than for other previously introduced equipment. The separation performance of the apparatus was tested with foundry sand. A large amount of sand was treated, and various processing capacities were studied experimentally. The feed method was improved from point to line with wide troughs to process the higher feed rate. We succeeded in attaining a feed rate of 1.49 × 10−3 kg/s with a 0.3-m trough. The space filling, which was an important factor in deciding the capacity of the feed rate, was defined. This method is useful for any kind of line-feed method.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: March 25, 2002 / Accepted: August 5, 2002
Rights and permissions
About this article
Cite this article
Ohya, H., Endoh, S., Honma, T. et al. Improvement in the feeding method to an inclined conveyor designed for the recycling of foundry sand. J Mater Cycles Waste Manag 5, 0049–0054 (2003). https://doi.org/10.1007/s101630300008
Issue Date:
DOI: https://doi.org/10.1007/s101630300008