Skip to main content

Advertisement

SpringerLink
Log in

Mineralogical analysis of waste LEDs and the recovery process of valuable components

  • SPECIAL FEATURE: ORIGINAL ARTICLE
  • 8th 3R International Scientific Conference (8th 3RINCs 2022)
  • Published:
Journal of Material Cycles and Waste Management Aims and scope Submit manuscript

Abstract

LED lights are widely used in household appliances, automotive lighting, decorative materials, and other fields due to their high energy efficiency. At the same time, LED waste is also growing rapidly. LED lamps contain some valuable elements, such as Ga and In, as well as some toxic and hazardous substances. Properly processing and recycling of LED lamps are significant for resources recovery and ecological protection. The particle size distribution, morphology, and elemental composition of the separated products of the LED light strip were analyzed. The results show that with the extension of the crushing time, the contents of Fe, Cu and C increased, while the contents of Si did not change significantly in the lamp bead powder. The contents of Cu, C and Si in magnetic materials decreased, more than 98% of the Fe entered the magnetic product following magnetic separation. Taking into considering the peeling off of the lamp bead powder and the distribution of elements in it, the optimal crushing time appears to be 9 s. The Ga-containing particles in − 0.074 mm were fully dissociated. The relative content of Ga and In in this particle size range reached 22.30% and 16.46%, respectively. In the thermogravimetric analysis of the LED lamp, the pyrolysis temperature was 400 °C, and the largest weightlessness peak was found to appear at 462 °C. The Mineralogy analysis provides a basic data for the recycling of waste LEDs, and a recycling process for waste LED is developed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Zhu P, Ma Y, Wang Y et al (2020) Separation and recovery of materials from the waste light emitting diode (LED) modules by solvent method [J]. J Mater Cycles Waste Manag 22:1184–1194

    Article  Google Scholar 

  2. Islam G, Darbayeva E, Rymbayev Z et al (2019) Switching-off conventional lighting system and turning-on LED lamps in Kazakhstan: a techno-economic assessment [J]. Sustain Cities Soc 51:101790

    Article  Google Scholar 

  3. Khorasanizadeh H, Parkkinen J, Parthiban R et al (2015) Energy and economic benefits of LED adoption in Malaysia [J]. Renew Sustain Energy Rev 49:629–637

    Article  Google Scholar 

  4. Li J, He X, Zeng X (2016) Designing and examining e-waste recycling process: methodology and case studies [J]. Environ Technol 38:652–660

    Article  Google Scholar 

  5. Maria FD, Sisani F, Contini S et al (2020) Is the policy of the European Union in waste management sustainable? An assessment of the Italian context [J]. Waste Manag 103:437–448

    Article  Google Scholar 

  6. Hironori M, Syouhei N, Kazuharu Y (2015) Separation and recovery of gold from waste LED using ion exchange method [J]. Hydrometallurgy 157:194–198

    Article  Google Scholar 

  7. Ogundiran MB, Buluku TG, Babayemi JO et al (2015) Waste rechargeable electric lamps: characterisation and recovery of lead from their lead-acid batteries [J]. J Mater Cycles Waste Manag 19(1):1–9

    Google Scholar 

  8. Zhan L, Xia F, Xia Y et al (2017) Recycle gallium and arsenic from GaAs based e-wastes via pyrolysis-vacuum metallurgy separation: theory and feasibility [J]. Acs Sustain Chem Eng 6:1336–1342

    Article  Google Scholar 

  9. Zhan L, Zhang Y, Ahmad Z et al (2020) Novel recycle technology for recovering gallium arsenide from scraped integrated circuits [J]. ACS Sustain Chem Eng 8:2874–2882

    Article  Google Scholar 

  10. Franz M, Wenzl FP (2017) Critical review on life cycle inventories and environmental assessments of LED-lamps [J]. Crit Rev Environ Sci Technol 47:2017–2078

    Article  Google Scholar 

  11. Mizanur Rahman SM, Kim J, Lerondel G et al (2017) Missing research focus in end-of-life management of light-emitting diode (LED) lamps [J]. Resour Conserv Recycl 127:256–258

    Article  Google Scholar 

  12. Adie GU, Sun L, Zeng X et al (2016) Examining the evolution of metals utilized in printed circuit boards [J]. Environ Technol 1:1696–1701

    Google Scholar 

  13. Murali KVRM, Naik VB, Datta D (2015) Gallium-nitride-based light-emitting diodes [J]. Resonance 20(7):605–616

    Article  Google Scholar 

  14. Rebello RZ, Lima MTWDC, Yamane LH et al (2020) Characterization of end-of-life LED lamps for the recovery of precious metals and rare earth elements [J]. Resour Conserv Recycl 153:104557

    Article  Google Scholar 

  15. Zhan L, Xia FF, Ye QY et al (2015) Novel recycle tchnology for recovering rare metals (Ga, In) from waste light-emitting diodes [J]. J Hazard Mater 299:388–394

    Article  Google Scholar 

  16. Shi JL, Zhao XL, Zhang ZX et al (2021) Theoretical and experimental study on the triboelectric separation of ternary plastics combination using fluidized bed [J]. J Mater Cycles Waste Manag 2:2297–2306

    Article  Google Scholar 

  17. Liu Y, Liu J, Jiang ZW et al (2012) Chemical recycling of carbon fibre reinforced epoxy resin composites in subcritical water: synergistic effect of phenol and KOH on the decomposition efficiency [J]. Polym Degrad Stab 97(3):214–220

    Article  Google Scholar 

  18. Xing MF, Zhang FS (2013) Degradation of brominated epoxy resin and metal recovery from waste printed circuit boards through batch sub/supercritical water treatments [J]. Chem Eng J 219:131–136

    Article  Google Scholar 

  19. Wang Q, Luo SL, Wang Q et al (2011) The current situation and countermeasures of epoxy resin in electronic waste with sound disposal and recycling [J]. Environ Eng 29(S1):357–359

    Google Scholar 

  20. Bhakar V, Agur A, Digalwar AK, Sangwan KS et al (2015) Life cycle assessment of CRT, LCD and LED monitors [J]. Procedia CIRP 29:432–437

    Article  Google Scholar 

  21. Armendariz AL, Talano MA, Travaglia C et al (2016) Arsenic toxicity in soybean seedlings and their attenuation mechanisms [J]. Plant Physiol Biochem 98:119–127

    Article  Google Scholar 

  22. Bui TKL, Do-Hong LC, Dao TS et al (2016) Copper toxicity and the influence of water quality of Dongnai River and Mekong River waters on copper bioavailability and toxicity to three tropical species [J]. Chemosphere 144:872–878

    Article  Google Scholar 

  23. Lee KH, Chen HL, Leung CM et al (2016) Indium acetate toxicity in male reproductive system in rats [J]. Environ Toxicol 31(1–2):68–76

    Article  Google Scholar 

  24. Fu JJ, Wang YW, Zhou LJ et al (2011) Pollution status and perspectives of persistent toxic substances in E-waste dismantling area in China [J]. Progress Chem 23(8):1755–1768

    Google Scholar 

  25. Zhao ZY, Ding YB (2014). Study on environmental pollution caused by heavy metals in electronic waste [C] annual conference of Chinese society of environmental sciences

  26. Ye H, Li LZ, Xiang MD et al (2015) Pollution and ecological environment in electronic waste dismantling places and health effects of heavy metals and bromine flame retardants. J Environ Hyg 5(03):293–297

    Google Scholar 

  27. Cao Y, Liu ZP, He WZ et al (2016) Analysis on the environmental risks and recycling potential of waste LED [J]. Chin Illum Eng J 27(04):157–216

    Google Scholar 

  28. Pinheiro RF, Michielin L, Martins TR et al (2021) Application of mechanical processing operations for the recycling of nickel metal hydride batteries [J]. J Mater Cycles Waste Manag 23:1–14

    Article  Google Scholar 

Download references

Acknowledgements

The authors acknowledge the financial support by the National Nature Science Foundation of China (51674257), Key-Area Research and Development Program of Guangdong Province (2020B090919003).

Author information

Authors and Affiliations

  1. School of Chemical Engineering, China University of Mining and Technology, Xuzhou, 221116, Jiangsu, China

    Zhenxing Zhang, Gege Wang, Jiangshan Liu, Jilan Shi, Xuejie Bai, Youmei Chen, Yongqiang Xu & Haifeng Wang

Authors
  1. Zhenxing Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Gege Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jiangshan Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jilan Shi
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Xuejie Bai
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Youmei Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Yongqiang Xu
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Haifeng Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Haifeng Wang.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, Z., Wang, G., Liu, J. et al. Mineralogical analysis of waste LEDs and the recovery process of valuable components. J Mater Cycles Waste Manag 25, 628–636 (2023). https://doi.org/10.1007/s10163-022-01537-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10163-022-01537-z

Keywords

Search

Navigation