Advertisement

Journal of Material Cycles and Waste Management

, Volume 20, Issue 2, pp 1273–1285 | Cite as

Pyrolytic conversion of used tyres to liquid fuel: characterization and effect of operating conditions

  • Julius I. Osayi
  • Sunny Iyuke
  • Michael O. Daramola
  • Peter Osifo
  • Izak J. Van Der Walt
  • Samuel E. Ogbeide
ORIGINAL ARTICLE
  • 179 Downloads

Abstract

Thermochemical conversion (pyrolysis) of used tyres as a method of solid waste treatment and its beneficiation to value-added products (such as liquid fuel) was investigated in this study. A chemical vapour deposition reactor was used for the tyre pyrolysis, and effects of operating variables on the process were studied. Operating variables were the tyre feed mass and size, heating rate, and temperature. The operating parameters were also optimized to yield an optimum yield of 34.03 wt% for the liquid product (pyrolytic oil) at operating temperature of 600 °C at a heating rate of 15 °C/min for a feed particle size of 6 mm. A detailed characterization of the pyrolytic oil was performed using Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR), and gas chromatography–mass spectrometry (GC–MS). Results obtained reveal the pyrolytic oil to be a complex mixture, mainly of aliphatic and aromatic compounds, which can serve as a feedstock in industrial application. In addition, the physicochemical properties of the oil were comparable to that of the conventional fossil fuel oil, implying the possibility of the used tyres as an alternative source of liquid fuel.

Keywords

Fossil fuel Pyrolysis Pyrolytic oil Used tyres 

Notes

Acknowledgements

Financial support from the National Research Foundation (NRF) under the South Africa NRF Focus Area and student bursaries made available by both the University of the Witwatersrand and Vaal University of Technology is hereby acknowledged.

References

  1. 1.
    Martínez JD et al (2014) Co-pyrolysis of biomass with waste tyres: upgrading of liquid bio-fuel. Fuel Process Technol 119:263–271CrossRefGoogle Scholar
  2. 2.
    Osayi JI, Iyuke S, Ogbeide SE (2014) Biocrude production through pyrolysis of used tyres. J Catal 2014:1–9CrossRefGoogle Scholar
  3. 3.
    Kumaravel ST, Murugesan A, Kumaravel A (2016) Tyre pyrolysis oil as an alternative fuel for diesel engines—a review. Renew Sustain Energy Rev 60:1678–1685CrossRefGoogle Scholar
  4. 4.
    Song Z et al (2017) Microwave pyrolysis of tire powders: evolution of yields and composition of products. J Anal Appl Pyrolysis 123:152–159CrossRefGoogle Scholar
  5. 5.
    Mahlangu L (2009) Waste tire management problems in South Africa and the possible opportunities that can be created through the recycling thereof. University of South Africa, PretoriaGoogle Scholar
  6. 6.
    Lopez G et al (2017) Waste truck-tyre processing by flash pyrolysis in a conical spouted bed reactor. Energy Convers Manag 142:523–532CrossRefGoogle Scholar
  7. 7.
    Molewa BE (2013) National Environmental Management: Waste Act (59/2008): approval of an integrated industry waste tyre management plan of the recycling and economic development initiative of South Africa. South African National Department of Environmental AffairsGoogle Scholar
  8. 8.
    Pilusa TJ, Shukla M, Muzenda E, Natal K, West N (2013) Tyre derived fuel as an alternative fuel for CI engines. In: 2nd International conference on environment, agriculture and food sciences (ICEAFS'2013). Kuala Lumpur (Malaysia), pp 116–120, 25–26 August 2013Google Scholar
  9. 9.
    Undri A, Rosi L, Frediani M, Frediani P (2014) Fuel from microwave assisted pyrolysis of waste multilayer packaging beverage. Fuel 133:7–16CrossRefGoogle Scholar
  10. 10.
    Wang K et al (2017) Thermal pyrolysis of bicycle waste tyre using batch reactor. Bioresour Technol 102(5):229–234CrossRefGoogle Scholar
  11. 11.
    Kar Y (2011) Catalytic pyrolysis of car tire waste using expanded perlite. Waste Manag 31(8):1772–1782CrossRefGoogle Scholar
  12. 12.
    Seng-eiad S, Jitkarnka S (2016) Untreated and HNO < inf> 3</inf>-treated pyrolysis char as catalysts for pyrolysis of waste tire: in-depth analysis of tire-derived products and char characterization. J Anal Appl Pyrolysis 122:151–159CrossRefGoogle Scholar
  13. 13.
    Ding K, Zhong Z, Zhang B, Song Z, Qian X (2015) Pyrolysis characteristics of waste tire in an analytical pyrolyzer coupled with gas chromatography/mass spectrometry. Energy Fuels 29:5Google Scholar
  14. 14.
    Rofiqul Islam M, Haniu H, Rafiqul Alam Beg M (2008) Liquid fuels and chemicals from pyrolysis of motorcycle tire waste: product yields, compositions and related properties. Fuel 87(13–14):3112–3122CrossRefGoogle Scholar
  15. 15.
    Aydin H, Ilkiliç C (2015) Analysis of combustion, performance and emission characteristics of a diesel engine using low sulfur tire fuel. Fuel 143:373–382CrossRefGoogle Scholar
  16. 16.
    Ayanoğlu, Yumrutaş R (2016) Production of gasoline and diesel like fuels from waste tire oil by using catalytic pyrolysis. Energy 103:456–468CrossRefGoogle Scholar
  17. 17.
    Frigo S, Seggiani M, Puccini M, Vitolo S (2014) Liquid fuel production from waste tyre pyrolysis and its utilisation in a diesel engine. Fuel 116:399–408CrossRefGoogle Scholar
  18. 18.
    Dai L et al (2017) Microwave-assisted catalytic fast co-pyrolysis of soapstock and waste tire for bio-oil production. J Anal Appl Pyrolysis 125:304–309Google Scholar
  19. 19.
    Namchot W, Jitkarnka S (2015) Upgrading of waste tyre-derived oil from waste tyre pyrolysis over Ni catalyst supported on HZSM-5 zeolite. Chem Eng Trans 45:775–780Google Scholar
  20. 20.
    Wang Y et al (2017) Microwave-assisted catalytic fast co-pyrolysis of bamboo sawdust and waste tire for bio-oil production. J Anal Appl Pyrolysis 123:224–228Google Scholar
  21. 21.
    García-Contreras R, Martínez JD, Armas O, Murillo R, García T (2015) Study of a residential boiler under start-transient conditions using a tire pyrolysis liquid (TPL)/diesel fuel blend. Fuel 158:744–752CrossRefGoogle Scholar
  22. 22.
    Mkhize NM, Danon B, van der Gryp P, Görgens JF (2017) Condensation of the hot volatiles from waste tyre pyrolysis by quenching. J Anal Appl Pyrolysis 124:180–185CrossRefGoogle Scholar
  23. 23.
    Kan T, Strezov V, Evans T (2017) Fuel production from pyrolysis of natural and synthetic rubbers. Fuel 191:403–410CrossRefGoogle Scholar
  24. 24.
    Krzywda R, Wąsowski T, Wrzesińska B, Gradoń L (2017) Improvement of properties of carbonizate from waste tyre pyrolysis by mechanical methods | Waloryzacja metodami mechanicznymi karbonizatu z pirolizy zuzytych opon samochodowych. Przem Chem 96(2):444–447Google Scholar
  25. 25.
    Kyari M, Cunliffe A, Williams PT (2005) Characterization of oils, gases, and char in relation to the pyrolysis of different brands of scrap automotive tires. Energy Fuels 19(3):1165–1173CrossRefGoogle Scholar
  26. 26.
    Islam MR, Tushar MSHK., Haniu H (2008) Production of liquid fuels and chemicals from pyrolysis of Bangladeshi bicycle/rickshaw tire wastes. J Anal Appl Pyrolysis 82(1):96–109CrossRefGoogle Scholar
  27. 27.
    Onay O, Koca H (2015) Determination of synergetic effect in co-pyrolysis of lignite and waste tyre. Fuel 150:169–174CrossRefGoogle Scholar
  28. 28.
    Kwon E, Castaldi MJ (2009) Fundamental understanding of the thermal degradation mechanisms of waste tires and their air pollutant generation in a N2 atmosphere. Environ Sci Technol 43(15):5996–6002CrossRefGoogle Scholar
  29. 29.
    Gersten J, Fainberg V, Hetsroni G, Shindler Y (2000) Kinetic study of the thermal decomposition of polypropylene, oil shale, and their mixture. Fuel 79(13):1679–1686CrossRefGoogle Scholar
  30. 30.
    Lopez G, Aguado R, Olazar M, Arabiourrutia M, Bilbao J (2009) Kinetics of scrap tyre pyrolysis under vacuum conditions. Waste Manag 29(10):2649–2655CrossRefGoogle Scholar
  31. 31.
    Adrados A, De Marco I, Caballero BM, López A, Laresgoiti MF, Torres A (2012) Pyrolysis of plastic packaging waste: a comparison of plastic residuals from material recovery facilities with simulated plastic waste. Waste Manag 32(5):826–832CrossRefGoogle Scholar
  32. 32.
    Sun R, Zhu B-Z, Sun Y-L (2016) Pyrolysis and reaction kinetics of automobile waste tire with TG-DSC-MS technique. Guocheng Gongcheng Xuebao/Chin J Process Eng 16(6):966–971Google Scholar
  33. 33.
    Berrueco C, Esperanza E, Mastral FJ, Ceamanos J, García-Bacaicoa P (2005) Pyrolysis of waste tyres in an atmospheric static-bed batch reactor: analysis of the gases obtained. J Anal Appl Pyrolysis 74(1–2):245–253CrossRefGoogle Scholar
  34. 34.
    Williams PT (2013) Pyrolysis of waste tyres: a review. Waste Manag 33(8):1714–1728CrossRefGoogle Scholar
  35. 35.
    Iyuke SE, Daramola MO, Mokena P, Marshall A (2015) Thermodynamic stability of graphitic diamond films produced from catalytic chemical vapour deposition reactor. J Ind Eng Chem 30:336–341CrossRefGoogle Scholar
  36. 36.
    Mui ELK, Cheung WH, McKay G (2010) Tyre char preparation from waste tyre rubber for dye removal from effluents. J Hazard Mater 175(1–3):151–158CrossRefGoogle Scholar
  37. 37.
    González JF, Encinar JM, Canito JL, Rodríguez JJ (2001) Pyrolysis of automobile tyre waste. Influence of operating variables and kinetics study. J Anal Appl Pyrolysis 58–59:667–683CrossRefGoogle Scholar
  38. 38.
    de Marco Rodriguez M, Laresgoiti M, Cabrero A, Torres M, Chomon, Caballero B (2001) Pyrolysis of scrap tyres. Fuel Process Technol 72(1):9–22CrossRefGoogle Scholar
  39. 39.
    Quek A, Balasubramanian R (2013) Liquefaction of waste tires by pyrolysis for oil and chemicals? a review. J Anal Appl Pyrolysis 101:1–16CrossRefGoogle Scholar
  40. 40.
    Juma M, Korenova Z, Markos J, Annus J, Jelemensky L (2006) Pyrolisis and combustion of scrap tyres. Pet Coal 48:15–26Google Scholar
  41. 41.
    Barbooti MM, Mohamed TJ, Hussain AA, Abas FO (2004) Optimization of pyrolysis conditions of scrap tires under inert gas atmosphere. J Anal Appl Pyrolysis 72(1):165–170CrossRefGoogle Scholar
  42. 42.
    Dai X, Yin X, Wu C, Zhang W, Chen Y (2001) Pyrolysis of waste tires in a circulating fluidized-bed reactor. Energy 26(4):385–399CrossRefGoogle Scholar
  43. 43.
    Pradhan D, Singh RK (2011) Thermal pyrolysis of bicycle waste tyre using batch reactor. Int J Chem Eng Appl 2:332Google Scholar
  44. 44.
    Mastral A, Murillo R, Callen M, Garcia T (2000) Optimisation of scrap automotive tyres recycling into valuable liquid fuels. Resour Conserv Recycl 29(4):263–272CrossRefGoogle Scholar
  45. 45.
    Pakdel H, Pantea DM, Roy C (2001) Production of dl-limonene by vacuum pyrolysis of used tires. J Anal Appl Pyrolysis 57(1):91–107CrossRefGoogle Scholar
  46. 46.
    Bajus M Olahová N (2011) Thermal conversion of scrap tyres. Pet Coal 53(2):98–105Google Scholar
  47. 47.
    Bardsley MEA, Mikhalovsky SV, Dombrovsky LA, Sazhin SS, Sazhina EM, Feng G, Heikal MR (2001) Heating and evaporation of semitransparent diesel fuel droplets in the presence of thermal radiation. Fuel 80:1535–1544Google Scholar
  48. 48.
    Brammer AV, Bridgwater JG (1999) Drying technologies for an integrated gasification bio-energy plant. Renew Sustain Energy Rev 3:243–289CrossRefGoogle Scholar
  49. 49.
    Chang Y-M (1996) On pyrolysis of waste tire: degradation rate and product yields. Resour Conserv Recycl 17(2):125–139MathSciNetCrossRefGoogle Scholar
  50. 50.
    Laresgoiti MJ, Caballero MF, de Marco BM, Torres I, Cabrero A, Chomón MA (2004) Characterization of the liquid products obtained in tyre pyrolysis. J Anal Appl Pyrolysis 71:917–934CrossRefGoogle Scholar
  51. 51.
    Shen C, Wu B, Wang C, Guo R, Liang B (2006) Pyrolysis of scrap tyres with zeolite USY. J Hazard Mater 137:1065–1073CrossRefGoogle Scholar
  52. 52.
    Ucar S, Karagoz S, Ozkan AR, Yanik J (2005) Evaluation of two different scrap tires as hydrocarbon source by pyrolysis. Fuel 84(14–15):1884–1892CrossRefGoogle Scholar
  53. 53.
    Banar O, Akyıldız M, Ozkan V, Cokaygil A, Onay Z (2012) Characterization of pyrolytic oil obtained from pyrolysis of TDF (tire derived fuel). Energy Convers Manag 62:22–30CrossRefGoogle Scholar
  54. 54.
    Kaminsky Z, Mennerich W, Zhang C (2009) Feedstock recycling of synthetic and natural rubber by pyrolysis in a fluidized bed. J Anal Appl Pyrolysis 85:334–337CrossRefGoogle Scholar
  55. 55.
    Zhang X, Wang T, Ma L, Chang (2008) Vacuum pyrolysis of waste tyres with basic additives. Waste Manag 28:2301–2310CrossRefGoogle Scholar
  56. 56.
    Li S-Q, Yao Q, Chi Y, Yan J-H, Cen K-F (no. AUGUST 2004) Pilot-scale pyrolysis of scrap tires in a continuous rotary kiln reactor. Ind Eng Chem Res 43:5133–5145, 2004CrossRefGoogle Scholar
  57. 57.
    Aylon AM, Fernandez-Colino E, Murillo A, Navarro R, Garcia MV, Mastral T (2011) Valorisation of waste tyre by pyrolysis in a moving bed reactor. Waste Manag 30:1220–1224CrossRefGoogle Scholar

Copyright information

© Springer Japan KK, part of Springer Nature 2017

Authors and Affiliations

  • Julius I. Osayi
    • 1
  • Sunny Iyuke
    • 2
  • Michael O. Daramola
    • 2
  • Peter Osifo
    • 1
  • Izak J. Van Der Walt
    • 3
  • Samuel E. Ogbeide
    • 4
  1. 1.Department of Chemical EngineeringVaal University of TechnologyVanderbijlparkSouth Africa
  2. 2.School of Chemical and Metallurgical EngineeringUniversity of the WitwatersrandJohannesburgSouth Africa
  3. 3.Plasma Technology SectionSouth Africa Nuclear Energy Corporation (NECSA)PretoriaSouth Africa
  4. 4.Department of Chemical EngineeringUniversity of BeninBenin CityNigeria

Personalised recommendations