Journal of Material Cycles and Waste Management

, Volume 20, Issue 2, pp 1006–1015 | Cite as

Fly ash from biomass combustion as replacement raw material and its influence on the mortars durability

  • R. C. E. Modolo
  • L. Senff
  • V. M. Ferreira
  • L. A. C. Tarelho
  • C. A. M. Moraes
ORIGINAL ARTICLE
  • 118 Downloads

Abstract

Several types of industrial solid waste have been used as byproducts in the construction and materials industries. Some of the applications seem to be required from the environmental point of view as a contribution to circular economy. Nevertheless, durability of materials should be assessed to avoid future problems. This work evaluated the fly ash from forest biomass combustion as a potential additive replacing calcite in Portland cement-based mortars. Cement-based mortar formulations were prepared and characterized in the fresh and hardened states. In particular, the durability of samples cured for 1 year was assessed based on sulfate attack. Mortars cured for 360 days were pre-weighted and then totally immersed in a solution containing a well-defined concentration of sulfate. Seven-day immersion + drying cycles were carried out, and weight was determined after each cycle. Liquid solutions containing sulfate were renewed every 14 days. One set sample was kept soaked in tap water to be used as reference. The results revealed that replacing 20% of calcite by fly ash seems to be a suitable alternative concerning mechanical strength. However, sulfate attack tests showed that strength rapidly deteriorates using fly ashes as a replacement raw material.

Keywords

Mortars Biomass fly ash Sulfates attack Durability 

Notes

Acknowledgements

The authors thank Foundation for Science and Technology (FCT-Portugal) for the financial support (SFRH/BD/75182/2010—PhD grant and the project PTDC/AAC-AMB/098112/2008—Bias-to-soil—Biomass ash: Characteristics in relation to its origin, treatment and application to soil), and CNPq for the financial support of first author grant, Ciência sem Fronteiras Program—Postdoc modality: attracting young talent—BJT—MEC/MCTI/CAPES/CNPq/FAPs No. 02/2014.

References

  1. 1.
    Loo SV, Koppejan J (2003) Handbook of biomass combustion and co-firing. Twente University Press, The NetherlandsGoogle Scholar
  2. 2.
    Yin C, Rosendahl LA, Kaer SK (2008) Grate-firing of biomass fort heat and power production. P E Comb Sci 34:725–754. doi: 10.1016/j.pecs.2008.05.002 CrossRefGoogle Scholar
  3. 3.
    Tarelho LAC, Teixeira ER, Silva DFR, Modolo RCE, Silva JJF (2012) Characteristics, management and applications of ashes from thermochemical conversion of biomass to energy. In: World bioenergy 2012, conference & exhibition on biomass for energyGoogle Scholar
  4. 4.
    Vassilev SV, Baxter D, Andersen LK, Vassileva CG (2010) An overview of the chemical composition of biomass. Fuel 89(5):913–933. doi: 10.1016/j.fuel.2009.10.022 CrossRefGoogle Scholar
  5. 5.
    Vassilev SV, Baxter D, Andersen LK, Vassileva CG, Morgan TJ (2012) An overview of the organic and inorganic phase composition of biomass. Fuel 94:1–33. doi: 10.1016/j.fuel.2011.09.030 CrossRefGoogle Scholar
  6. 6.
    Latva-Somppi J, Kauppinen EI, Valmari T, Gurav AS, Kodas TT, Johanson B (1998) The ash formation during co-combustion of wood and sludge in industrial fluidized bed boilers. Fuel Process Technol 54(1–3):79–94CrossRefGoogle Scholar
  7. 7.
    Dahl O, Nurmesniemi H, Pöykiö R, Watkins G (2009) Comparison of the characteristics of bottom ash and fly ash from a medium-size (32 MW) municipal district heating plant incinerating forest residues and peat in a fluidized-bed boiler. Fuel Proc Technol 90(7–8):871–878. doi: 10.1016/j.fuproc.2009.04.013 CrossRefGoogle Scholar
  8. 8.
    Dahl O, Nurmesniemi H, Pöykiö R, Watkins G (2010) Heavy metal concentrations in bottom ash and fly ash fractions from a large-sized (246 MW) fluidized bed boiler with respect to their Finnish forest fertilizer limit values. Fuel Proc Technol 91(11):1634–1639. doi: 10.1016/j.fuproc.2010.06.012 CrossRefGoogle Scholar
  9. 9.
    Zhang MH (1995) Microstructure, crack propagation, and mechanical properties of cement pastes containing high volumes of fly ashes. Cement Concr Res 25:1165–1178CrossRefGoogle Scholar
  10. 10.
    Feldman RF, Carette GG, Malhotra VM (1990) Studies on development of physical and mechanical properties of high-volume fly ash-cement pastes. Cement Concr Compos 12:245–251CrossRefGoogle Scholar
  11. 11.
    Sakorafa V, Michailidis K, Burragato F (1996) Mineralogy, geochemistry and physical properties of fly ash from the megalopolis lignite fields, Peloponnese, Southern Greece. Fuel 75:419–423CrossRefGoogle Scholar
  12. 12.
    Biernacki JJ, Williams PJ, Stutzman PE (2001) Kinetics of reaction of calcium hydroxide and fly ash. ACI Mater J 98:340–349Google Scholar
  13. 13.
    Poon CS, Kou SC, Lam L, Lin ZS (2001) Activation of fly ash/cement using calcium sulfate anhydrate (CaSO4). Cement Concr Res 31:873–881CrossRefGoogle Scholar
  14. 14.
    Katz A (1998) Microscopic study of alkali-activated fly ash. Cement Concr Res 28:197–208CrossRefGoogle Scholar
  15. 15.
    Rajamma R, Ball RJ, Tarelho LAC, Allen CG, Labrincha JA, Ferreira VM (2009) Characterisation and use of biomass fly ash in cement-based materials. J Hazard Mater 172:1049–1060CrossRefGoogle Scholar
  16. 16.
    Jidrada P, Sua-iam G, Chatveera B et al (2016) Recycling of combined coal-biomass ash from electric power plant waste as a cementitious material: characteristics and improvement. J Mater Cycles Waste Manag 18:527–540. doi: 10.1007/s10163-014-0349-4 CrossRefGoogle Scholar
  17. 17.
    Modolo RCE (2014) Valorization of solid wastes from cellulose and paper industry. PhD thesis, University of AveiroGoogle Scholar
  18. 18.
    Portaria n.º 209/2004 de 3 de Março. Portuguese legislation about the European List of WastesGoogle Scholar
  19. 19.
    NP EN 133-1:2000 Tests for geometrical properties of aggregates. Part 1: Determination of particle size distribution - sieving methodGoogle Scholar
  20. 20.
    EN 196-5:2005 Methods of testing cement-part 5: Pozzolanicity test for pozzolanic cementsGoogle Scholar
  21. 21.
    EN 1015-3 (1999) Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table)Google Scholar
  22. 22.
    EN 1015-11:1999 Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortarGoogle Scholar
  23. 23.
    EN 998-1:2003 Specification for mortar for mansonry. Rendering and plastering mortarGoogle Scholar
  24. 24.
    Makaratat N, Jaturapitakkul C, Namarak C, Sata V (2011) Effects of binder and CaCl2 contents on the strength of calcium carbide residue-fly ash concrete. Cement Concr Compos 33:436–443CrossRefGoogle Scholar
  25. 25.
    Sanjuan MA (1997) Formation of chloroaluminates in calcium aluminate cements cured at high temperatures and exposed to chloride solutions. J Mat Sci 32(23):6207–6213CrossRefGoogle Scholar
  26. 26.
    Aho M, Gil A, Taipale R, Vainikka P, Vesala H (2008) A pilot-scale fireside deposit study of co-firing cynara with two coals in a fluidised bed. Fuel 87:58–69CrossRefGoogle Scholar
  27. 27.
    Dayton DC, Jenkins BM, Turn SQ, Bakker RR, Williams RB, Belle-Oudry D et al (1999) Release of inorganic constituents from leached biomass during thermal conversion. Energy Fuels 13:860–870CrossRefGoogle Scholar

Copyright information

© Springer Japan KK 2017

Authors and Affiliations

  • R. C. E. Modolo
    • 1
  • L. Senff
    • 2
  • V. M. Ferreira
    • 3
  • L. A. C. Tarelho
    • 4
  • C. A. M. Moraes
    • 1
  1. 1.Graduation Program in Civil Engineering, Polytechnic SchoolUniversity of Vale do Rio dos Sinos (Unisinos/NuCMat)São LeopoldoBrazil
  2. 2.Mobility Engineering CenterFederal University of Santa CatarinaFlorianópolisBrazil
  3. 3.Department of Civil EngineeringUniversity of Aveiro, CICECO/RISCOAveiroPortugal
  4. 4.Department of Environment and PlanningUniversity of Aveiro/CESAMAveiroPortugal

Personalised recommendations