Resource-availability scenario analysis for formal and informal recycling of end-of-life electrical and electronic equipment in China



In strategic end-of-life electrical and electronic equipment (EoL EEE) management, it has become important to not only avoid the negative environmental impacts but also enhance the positive effects of secondary resource utilization. This is especially true in emerging countries such as China, where medium- to long-term increases in the amount of EoL EEE generation are projected. This study aims to assess the resource availability potential for EoL EEE recycling based on penetration scenarios for formal and/or informal treatment options in China. We categorized substances contained in EoL television sets and personal computers into environmental, resource, and economic aspects under consideration of product transitions. Barium and copper have a high negative potential impact on human health and/or the ecosystem. Focusing on metals with a high resource potential, the resource availability is assessed under different treatment options using characterization factors identified through a life-cycle impact assessment method, the ReCiPe 2008. The results suggest that copper and lead recycling could alleviate the increase in mining costs of resource utilization. Scenario analysis for penetration of formal and informal recycling options indicated that the difference in the alleviated mining costs between the status quo and short-term transition projections until 2030 corresponds to 2.1–2.4 billion dollars.


Resource availability Environmental impact Management scenarios End-of-life electrical and electronic equipment China 



The authors would like to express their gratitude to Dr. Masahiro Oguchi, Dr. Atsushi Terazono, and Dr. Kenichi Nakajima, National Institute for Environmental Studies, Japan, for their valuable information and advice and Prof. Keisuke Hanaki, Prof. Kensuke Fukushi, Dr. Shinsuke Murakami, and Dr. Ichiro Daigo, School of Engineering, the University of Tokyo, for their valuable suggestions and comments.

Supplementary material

10163_2015_452_MOESM1_ESM.docx (695 kb)
Supplementary material 1 (DOCX 694 kb)


  1. 1.
    Zhao G, Wang Z, Dong MH, Rao K, Luo J, Wang D (2008) PBBs, PBDEs, and PCBs levels in hair of residents around e-waste disassembly sites in Zhejiang Province, China, and their potential sources. Sci Total Environ 397(1):46–57CrossRefGoogle Scholar
  2. 2.
    Fu J, Zhou Q, Liu J, Liu W, Wang T, Zhang Q (2008) High levels of heavy metals in rice from a typical E-waste recycling area in southeast China and its potential risk to human health. Chemosphere 71(7):1269–1275CrossRefGoogle Scholar
  3. 3.
    Ni HG, Zeng H, Tao S, Zeng EY (2010) Environmental and human exposure to persistent halogenated compounds derived from e-waste in China. Environ Toxicol Chem 29(6):1237–1247Google Scholar
  4. 4.
    Gullett BK, Linak WP, Touati A, Wasson SJ, Gatica S, King CJ (2007) Characterization of air emissions and residual ash from open burning of electronic wastes during simulated rudimentary recycling operations. J Mater Cycles Waste Manag. 9(1):69–79CrossRefGoogle Scholar
  5. 5.
    Widmer R, Oswald-Krapf H, Sinha-Khetriwal D, Schnellmann M, Böni H (2005) Global perspectives on e-waste. Environ Impact Assess Rev 25(5):436–458CrossRefGoogle Scholar
  6. 6.
    Robinson BH (2009) E-waste: an assessment of global production and environmental impacts. Sci Total Environ 408(2):183–191CrossRefGoogle Scholar
  7. 7.
    Wolterbeek H, Verburg T (2001) Predicting metal toxicity revisited: general properties vs. specific effects. Sci Total Environ 279(1–3):87–115CrossRefGoogle Scholar
  8. 8.
    Puckett J, Byster L, Westervelt S, Gutierrez R, Davis S, Hussain A, Dutta M (2002) Exporting harm, the high-tech trashing of Asia (Report). The Basel Action Network (BAN) Silicon Valley Toxics Coalition (SVTC). Seattle, WA, USAGoogle Scholar
  9. 9.
    Habuer NJ, Moriguchi Y (2014) Time-series product and substance flow analyses of end-of-life electrical and electronic equipment in China. Waste Manag 34(2):489–497CrossRefGoogle Scholar
  10. 10.
    Kumar KS, Baskar K (2014) Recycling of E-plastic waste as a construction material in developing countries. J Mater Cycles Waste Manag 17(4):718–724CrossRefGoogle Scholar
  11. 11.
    Greadel TE, Allwood J, Birat JP, Reck BK, Sibly SF, Sonnemann G, Buchert M, Hagelüken C (2011) Recycling rates of metals: a status report, a report of the working group on the global metal flows to the international resource panel. Accessed 8 Mar 2015
  12. 12.
    Yang J, Lu B, Xu C (2008) WEEE flow and mitigating measures in China. Waste Manag 28(9):1589–1597CrossRefGoogle Scholar
  13. 13.
    Hicks C, Dietmar R, Eugster M (2005) The recycling and disposal of electrical and electronic waste in China—legislative and market responses. Environ Impact Assess Rev 25(5):459–471CrossRefGoogle Scholar
  14. 14.
    Chi X, Streicher-Porte M, Wang MYL, Reuter MA (2011) Informal electronic waste recycling: a sector review with special focus on China. Waste Manag 31(4):731–742CrossRefGoogle Scholar
  15. 15.
    Lu C, Zhang L, Zhong Y, Ren W, Tobias M, Mu Z(2014) An overview of e-waste management in China. J Mater Cycles Waste Manag 17(1):1–12CrossRefGoogle Scholar
  16. 16.
    Nakajima K, Yamamoto K, Nakano K (2006) Recycle-flow analysis on used cellular phone based on total materials requirement. J Life Cycle Assess Jpn 2(4):341–346CrossRefGoogle Scholar
  17. 17.
    Oguchi M, Murakami S, Sakanakura H, Kida A, Kameya T (2011) A preliminary categorization of end-of-life electrical and electronic equipment as secondary metal resources. Waste Manag 31(9–10):2150–2160CrossRefGoogle Scholar
  18. 18.
    Tasaki T, Oguchi M, Kameya T, Urano K (2007) Screening of metals in waste electrical and electronic equipment using simple assessment methods. J Ind Ecol 11(4):64–84CrossRefGoogle Scholar
  19. 19.
    Shirahase T, Kida A (2009) Metals contents on one waste personal computer by detailed dismantling. J Jpn Soc Mater Cycle Waste Manag 20(4):217–230Google Scholar
  20. 20.
    Le H-L, Yamasue E, Okumura H, Ishihara KN (2014) Improving sustainable recovery of metals from waste printed circuit boards by the primary copper smelter process. J Mater Cycles Waste Manag 16(2):298–305CrossRefGoogle Scholar
  21. 21.
    Song Q, Wang Z, Li J, Zeng X (2013) The life cycle assessment of an e-waste treatment enterprise in China. J Mater Cycles Waste Manag 15(4):469–475CrossRefGoogle Scholar
  22. 22.
    Lam CW, Lim S-R, Schoenung JM (2013) Linking material flow analysis with environmental impact potential. J Ind Ecol 17(2):299–309CrossRefGoogle Scholar
  23. 23.
    NBSC (National Bureau of Statistics of the People’s Republic of China) (1994–2011) China statistical yearbook 1994–2011 (in both Chinese and English). China Statistic Press. Accessed 24 Feb 2015
  24. 24.
    ECCIIY, Editorial Committee of China Information Industry Yearbook (1995–2010) Yearbook of China information industry (in Chinese). Electronics. China National Publishing Trading Corporation. Beijing, ChinaGoogle Scholar
  25. 25.
    HML (Hazardous Material Laboratory) (2004) Determination of regulated elements in discarded laptop computers, LCD monitors, Plasma TVs and LCD TVs (SB Report) California Department of Toxic Substances Control (CDTSC). Accessed 7 Nov 2012
  26. 26.
    Berkhout F, Hertin J (2004) De-materialising and re-materialising: digital technologies and the environment. Futures 36(8):903–920CrossRefGoogle Scholar
  27. 27.
    Townsend TG, Vann KN, Mutha S, Pearson B, Jang Y-C, Musson SE (2004) RCRA toxicity characterization of computer CPUs and other discarded electronic devices. Department of Environmental Engineering Sciences, University of Florida, Gainesville, FloridaGoogle Scholar
  28. 28.
    Musson SE, Vann KN, Jang Y-C, Mutha S, Jordan A, Pearson B (2006) RCRA toxicity characterization of discarded electronic devices. Environ Sci Technol 40(8):2721–2726CrossRefGoogle Scholar
  29. 29.
    MEP (Ministry of Environmental Protection of the People’s Republic of China) (2010) The subsidies and verification guide for WEEE treatment enterprise. Accessed 2 Dec 2011
  30. 30.
    Li H, Wang Z, Chen L, Huang X (2009) Research on advanced materials for li-ion batteries. Adv Mater 21(45):4593–4607CrossRefGoogle Scholar
  31. 31.
    Junji M (1999) Collection and recycling situation of the world on the small rechargeable battery (in Japanese). Mater Jpn 38(6):497–501CrossRefGoogle Scholar
  32. 32.
    Rydh CJ, Svärd B (2003) Impact on global metal flows arising from the use of portable rechargeable batteries. Sci Total Environ 302(1–3):167–184CrossRefGoogle Scholar
  33. 33.
    MOE (Ministry of the Environment), Japan (2009) Report of proper disposal and recovery of rare metals from small appliances (in Japanese). Accessed 3 June 2011
  34. 34.
    Wenzel H, Alting L (1997) Environmental assessment of products: volume 2: scientific background. Springer, New York, p 588Google Scholar
  35. 35.
    Guinée JB (ed) (2002) Handbook on life cycle assessment. Operational guide to the ISO standards. Kluwer Academic Publishers, DordrechtGoogle Scholar
  36. 36.
    Goedkoop M, Spriensma R (2001) The Eco-indicator 99: a damage oriented method for life cycle impact assessment. Amerfoort, Netherlands: PRe Consultants B.V.; Accessed 6 Mar 2015
  37. 37.
    Jolliet O, Margni M, Charles R, Humbert S, Payet J, Rebitzer G (2003) IMPACT 2002+: a new life cycle impact assessment methodology. Int J Life Cycle Assess 8(6):324–330CrossRefGoogle Scholar
  38. 38.
    Itsubo N, Inaba A (2010) LIME2: life-cycle impact assessment method based on Endpoint modeling. Sangyokankyokanrikyokai, TokyoGoogle Scholar
  39. 39.
    Goedkoop M, Heijungs R, Huijbregts M, De Schryver A, Struijs J, van Zelm R (2009) ReCiPe 2008: a life cycle impact assessment method which comprises harmonised category indicators at the midpoint and the endpoint level. The Hague, Netherlands: Vrom. Accessed May 2012
  40. 40.
    UNEP (United Nations Environment Programme) _2b IRP (2013) Metal recycling: opportunities, limits, infrastructure. The global metal flows working group of the international resource panel of UNEP. Accessed 16 July 2015
  41. 41.
    UNEP (United Nations Environment Programme) IRP. (2007) E-waste volume II: e-waste management manual. Accessed 16 July 2015
  42. 42.
    LME (London Metal Exchange). Accessed 17 June 2013
  43. 43.
    InvestmentMine. Accessed 17 June 2013
  44. 44.
    Aya Y, Atsushi T, Kenichi N, Murakami-S R, Michikazu K, Shozo S, Kazuo M (2010) Classification of e-waste recycling technology in Asian developing countries (in Japanese). National Institute of Environmental Studies, JapanGoogle Scholar

Copyright information

© Springer Japan 2015

Authors and Affiliations

  1. 1.Department of Global Ecology, Graduate School of Global Environmental StudiesKyoto UniversityNishikyō-kuJapan
  2. 2.Department of Urban Engineering, Graduate School of Engineeringthe University of TokyoBunkyō-kuJapan

Personalised recommendations